Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M 8-Pin DIP High Speed Transistor Optocouplers Features Description * * * * The 6N135M, 6N136M, HCPL4503M, HCPL2530M, and HCPL2531M optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor for each channel. High Speed - 1 MBit/s Dual-Channel: HCPL2530M, HCPL2531M CTR Guaranteed 0C to 70C No Base Connection for Improved Noise Immunity (HCPL4503M) * Superior CMR of 15,000 V/s Minimum (HCPL4503M) * Safety and Regulatory Approvals - UL1577, 5,000 VACRMS for 1 Minute - DIN EN/IEC60747-5-5 Applications * * * * The HCPL4503M has no internal connection to the phototransistor base for improved noise immunity. An internal noise shield provides superior common mode rejection of up to 50,000 V/s. Related Resources Line Receivers Pulse Transformer Replacement Output Interface to CMOS-LSTTL-TTL Wide-Bandwidth Analog Coupling * * * * Schematics N/C 1 A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. www.fairchildsemi.com/products/optoelectronics/ www.fairchildsemi.com/pf/HC/HCPL0500.html www.fairchildsemi.com/pf/FO/FODM452.html www.fairchildsemi.com/pf/FO/FOD050L.html Package Outlines 8 VCC + 1 8 VCC 8 8 1 1 V F1 + 2 7 VB _ 2 7 V01 3 6 V02 V F _ 3 6 VO _ 8 V F2 N/C 4 5 GND 6N135M, 6N136M, HCPL4503M + 4 8 1 1 Figure 2. Package Outlines 5 GND HCPL2530M, HCPL2531M Pin 7 is not connected in the HCPL4503M Figure 1. Schematics (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers January 2016 As per DIN EN/IEC 60747-5-5, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage Characteristics < 150 VRMS I-IV < 300 VRMS I-IV < 450 VRMS I-III < 600 VRMS I-III Climatic Classification 40/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Comparative Tracking Index Symbol VPR 175 Parameter Value Unit Input-to-Output Test Voltage, Method A, VIORM x 1.6 = VPR, Type and Sample Test with tm = 10 s, Partial Discharge < 5 pC 1,335 Vpeak Input-to-Output Test Voltage, Method B, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1,669 Vpeak 890 Vpeak VIORM Maximum Working Insulation Voltage VIOTM Highest Allowable Over-Voltage 6,000 Vpeak External Creepage 8.0 mm External Clearance External Clearance (for Option TV, 0.4" Lead Spacing) DTI TS IS,INPUT PS,OUTPUT RIO 7.4 mm 10.16 mm 0.5 mm Case Temperature(1) 150 C Input Current(1) 200 mA 300 mW > 109 Distance Through Insulation (Insulation Thickness) Output Power (Duty Factor 2.7%)(1) Insulation Resistance at TS, VIO = 500 V(1) Note: 1. Safety limit value - maximum values allowed in the event of a failure. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 2 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Safety and Insulation Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25C unless otherwise specified. Symbol Parameter Test Conditions Value Unit TSTG Storage Temperature -40 to +125 C TOPR Operating Temperature -40 to +100 C TJ TSOL Junction Temperature Lead Solder Temperature -40 to +125 C 260 for 10 sec C 25 mA 50 mA 1.0 A 5 V 45 mW EMITTER IF (avg) IF (pk) IF (trans) VR PD DC/Average Forward Input Current Each Channel(2) 50% Duty Cycle, 1 ms P.W. Peak Forward Input Current Each Channel(3) Peak Transient Input Current Each Channel 1 s P.W., 300 pps Reverse Input Voltage Each Channel Input Power Dissipation Each Channel(4) DETECTOR IO (avg) Average Output Current Each Channel 8 mA IO (pk) Peak Output Current Each Channel 16 mA VEBR Emitter-Base Reverse Voltage 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage IB Base Current PD Output Power Dissipation Each Channel(5) 6N135M and 6N136M 6N135M and 6N136M -0.5 to 20 V 5 mA 100 mW Notes: 2. Derate linearly above 70C free-air temperature at a rate of 0.8 mA/C. 3. Derate linearly above 70C free-air temperature at a rate of 1.6 mA/C. 4. Derate linearly above 70C free-air temperature at a rate of 0.9 mW/C. 5. Derate linearly above 70C free-air temperature at a rate of 2.0 mW/C. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage Min. Max. Unit 4.5 20.0 V TA Ambient Operating Temperature 0 70 C IFL Input Current, Low Level 0 250 A IFH Input Current, High Level(6) 6.3 20.0 mA Note: 6. 6.3 mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value is 5.0 mA or less. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 3 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Absolute Maximum Ratings VCC = 5.0 V, TA = 0C to 70C unless otherwise specified. Individual Component Characteristics Symbol Parameter Device Test Conditions Min. Typ. Max. 1.45 1.70 Unit EMITTER VF BVR VF/TA All IF = 16 mA, TA = 25C All IF = 16 mA All IR = 10 A Temperature Coefficient All of Forward Voltage IF = 16 mA Input Forward Voltage Input Reverse Breakdown Voltage 1.80 5 V 21 V -1.7 mV/C DETECTOR IF = 0 mA, VO = VCC = 5.5 V, TA = 25C 0.0007 0.5 6N135M, IF = 0 mA, VO = VCC = 15 V, 6N136M, TA = 25C HCPL4503M 0.0019 1 All IOH Logic High Output Current All ICCL ICCH Logic Low Supply Current Logic High Supply Current IF = 0 mA, VO = VCC = 15 V 6N135M, IF = 16 mA, VO = Open, 6N136M, VCC = 15 V HCPL4503M HCPL2530M, IF1 = IF2 = 16 mA, HCPL2531M VO = Open, VCC = 15 V 6N135M, IF = 0 mA, VO = Open, 6N136M, VCC = 15 V HCPL4503M HCPL2530M, IF = 0 mA, VO = Open, HCPL2531M VCC = 15 V (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 A 50 163 200 A 400 0.0004 2 A 4 www.fairchildsemi.com 4 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics TA = 0C to 70C unless otherwise specified. Transfer Characteristics Symbol Parameter Device Test Conditions Min. Typ. Max. Unit 7 38 50 % 19 38 50 % COUPLED 6N135M, HCPL2530M CTR Current Transfer Ratio(7) 6N136M, HCPL4503M, HCPL2531M IF = 16 mA, VO = 0.4 V, VCC = 4.5 V, TA = 25C 6N135M VOL = 0.4 V HCPL2530M VOL = 0.5 V IF = 16 mA, 6N136M, VCC = 4.5 V HCPL4503M HCPL2531M VOL = 0.4 V VOL % 15 % VOL = 0.5 V 6N135M Logic LOW Output Voltage 5 IF = 16 mA, IO = 1.1 mA, HCPL2530M VCC = 4.5 V, TA = 25C 0.12 6N136M, HCPL4503M IF = 16 mA, IO = 3 mA, VCC = 4.5 V, TA = 25C HCPL2531M 0.20 6N135M, IF = 16 mA, IO = 0.8 mA, HCPL2530M VCC = 4.5 V HCPL4503M, IF = 16 mA, IO = 2.4 mA, HCPL2531M VCC = 4.5 V 0.4 0.5 0.4 0.5 0.11 0.5 0.18 0.5 V Note: 7. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 5 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics (continued) TA = 0C to 70C unless otherwise specified. Switching Characteristics Symbol Parameter Device Test Conditions Max. Unit 1.5 s 0.8 s 6N135M, RL = 4.1 k, IF = 16 mA(8) HCPL2530M (Figure 15) 2.0 s 6N136M, R = 1.9 k, IF = 16 mA(9) HCPL4503M, L (Figure 15) HCPL2531M 1.0 s 1.5 s 0.8 s 2.0 s 1.0 s 6N135M TA = 25C, RL = 4.1 k, (8) HCPL2530M IF = 16 mA (Figure 15) tPHL Propagation Delay Time to Logic LOW 6N136M, RL = 1.9 k, HCPL4503M TA = 25C, (9) IF = 16 mA (Figure 15) HCPL2531M 6N135M TA = 25C, RL = 4.1 k, (8) I HCPL2530M F = 16 mA (Figure 15) tPLH Propagation Delay Time to Logic HIGH 6N136M, RL = 1.9 k, HCPL4503M TA = 25C, (9) IF = 16 mA (Figure 15) HCPL2531M 6N135M, RL = 4.1 k, IF = 16 HCPL2530M (Figure 15) Min. Typ. 0.23 0.25 0.25 0.28 0.45 0.29 0.26 0.18 mA(8) 6N136M, R = 1.9 k, IF = 16 mA(9) HCPL4503M, L (Figure 15) HCPL2531M |CMH| Common Mode Transient Immunity at Logic High IF = 0 mA, VCM = 10 VP-P, 6N135M, RL = 4.1 k, TA = 25C(10) HCPL2530M (Figure 16) 10,000 IF = 0 mA, VCM = 10 VP-P, 6N136M, RL = 1.9 k, TA = 25C(10) HCPL2531M (Figure 16) 10,000 V/s IF = 0 mA, VCM = 1,500 VP-P, HCPL4503M RL = 4.1 k, TA = 25C(10) 15,000 50,000 (Figure 16) |CML| Common Mode Transient Immunity at Logic Low IF = 16 mA, VCM = 10 VP-P, 6N135M, RL = 4.1 k, TA = 25C(10) HCPL2530M (Figure 16) 10,000 IF = 16 mA, VCM = 10 VP-P, 6N136M, RL = 1.9 k(10) HCPL2531M (Figure 16) 10,000 V/s IF = 0 mA, VCM = 1,500 VP-P, HCPL4503M RL = 4.1 k, TA = 25C(10) 15,000 50,000 (Figure 16) Notes: 8. The 4.1 k load represents 1 LSTTL unit load of 0.36 mA and 6.1 k pull-up resistor. 9. The 1.9 k load represents 1 TTL unit load of 1.6 mA and 5.6 k pull-up resistor. 10. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0 V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8 V). (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 6 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Electrical Characteristics (continued) Symbol Parameter Device Test Conditions Min. 5,000 VISO Withstand Isolation Test Voltage All RH 50%, II-O 10 A t = 1 minute, f = 50 Hz(11)(13) RI-O Resistance (Input to Output) All VI-O = 500 VDC(11) CI-O Capacitance (Input to Output) All f = 1 MHz, VI-O = 0 VDC(11) II-I Input-Input Insulation Leakage Current RI-I CI-I Typ. Max. Unit VACRMS 1011 1 pF HCPL2530M, RH 45%, HCPL2531M VI-I = 500 VDC, t = 5 s(12) <1 nA Input-Input Resistance HCPL2530M, VI-I = 500 VDC(12) HCPL2531M 1012 Input-Input Capacitance HCPL2530M, f = 1 MHz(12) HCPL2531M 0.2 pF Notes: 11. Device is considered a two terminal device: pins 1, 2, 3 and 4 are shorted together and pins 5, 6, 7 and 8 are shorted together. 12. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. 13. 5000 VRMS for 1 minute duration is equivalent to 6000 VRMS for 1 second duration. (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 7 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Isolation Characteristics (TA = 25C unless otherwise specified.) CTR (NORMALIZED) CTR(TA) / CTR (TA = 16 mA) CTR (NORMALIZED) CTR(IF) / CTR (IF = 16 mA) For single-channel devices; 6N135M, 6N136M, and HCPL4503M. 1.6 1.4 1.2 1.0 0.8 0.6 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.4 0.2 0.0 0.1 1 10 100 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 IF - FORWARD CURRENT (mA) IOH - LOGIC HIGH OUTPUT CURRENT (nA) IO - OUTPUT CURRENT (mA) IF = 40 mA 20 35 mA 30 mA 15 25 mA 20 mA 10 15 mA 10 mA 5 5 mA 0 2 4 6 8 10 12 40 60 80 100 120 Figure 4. Normalized CTR vs. Temperature 25 0 20 TA - TEMPERATURE (C) Figure 3. Normalized CTR vs. Forward Current TA = 25C VCC = 5 V IF = 16mA VCC = 4.5V VO = 0.4V Normalized to: TA = 25C 14 16 18 1000 IF = 0 mA VCC = 5.5 V VO = 5.5 V 100 10 1 0.1 -40 20 -20 0 20 40 60 80 100 120 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Figure 5. Output Current vs. Output Voltage Figure 6. Logic High Output Current vs. Temperature 800 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V RL = 4.1 k (tPLH) TP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 700 600 500 RL = 1.9 k (tPLH) 400 RL = 1.9 k (tPHL) 300 RL = 4.1 k (tPHL) 200 100 0 -40 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V 1000 IF = 16 mA (tPLH) IF = 10 mA (tPLH) IF = 10 mA (tPHL) IF = 16 mA (tPHL) 100 -20 0 20 40 60 80 100 120 1 TA - TEMPERATURE (C) Figure 8. Propagation Delay vs. Load Resistance Figure 7. Propagation Delay vs. Temperature (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 8 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Typical Performance Curves CTR (NORMALIZED) CTR(TA) / CTR (TA = 25C) CTR (NORMALIZED) CTR(IF) / CTR (IF = 16 mA) For dual-channel devices; HCPL2530M and HCPL2531M. 1.6 1.4 1.2 1.0 0.8 0.6 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.4 0.2 0.0 0.1 1 10 100 0.8 0.6 0.4 IF = 16 mA VCC = 4.5 V VO = 0.4 V Normalized to: TA = 25C 0.2 0.0 -40 -20 0 20 40 60 80 100 TA - TEMPERATURE (C) Figure 9. Normalized CTR vs. Forward Current Figure 10. Normalized CTR vs. Temperature IOH - LOGIC HIGH OUTPUT CURRENT (nA) TA = 25C VCC = 5 V IO - OUTPUT CURRENT (mA) 1.0 IF - FORWARD CURRENT (mA) 20 15 IF = 40 mA 35 mA 30 mA 10 25 mA 20 mA 15 mA 5 10 mA 5 mA 2 4 6 8 10 12 14 16 18 20 120 1000 IF = 0 mA VCC = 5.5 V VO = 5.5 V 100 10 1 0.1 -40 0 0 1.2 -20 0 20 40 60 80 100 120 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Figure 12. Logic High Output Current vs. Temperature Figure 11. Output Current vs. Output Voltage 500 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V TP - PROPAGATION DELAY (ns) tP - PROPAGATION DELAY (ns) 600 RL = 4.1 k (tPLH) 400 RL = 1.9 k (tPHL) 300 RL = 1.9 k (tPLH) 200 RL = 4.1 k (tPHL) 100 0 -40 Frequency = 10 kHz Duty Cycle = 10% VCC = 5 V TA = 25C 1000 IF = 10 mA (tPHL) IF = 16 mA (tPHL) IF = 16 mA (tPLH) IF = 10 mA (tPLH) 100 -20 0 20 40 60 80 100 120 1 TA - TEMPERATURE (C) Figure 14. Propagation Delay vs. Load Resistance Figure 13. Propagation Delay vs. Temperature (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 9 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Typical Performance Curves (Continued) Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100 s 1 Noise Shield 8 + 2 7 VF - 3 6 VCC Pulse Generator tr = 5 ns Z O = 50 +5 V VB 10% DUTY CYCLE I/f < 100 S RL VO I F Monitor 4 5 IF MONITOR 1 8 VCC +5 V RL VF1 - 2 7 V01 VO C L = 15 pF 3 6 4 5 VF2 + Rm C L = 15 pF GND Noise Shield + - VO 0.1 F Rm IF V02 0.1 F GND Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, and HCPL4503M IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Figure 15. Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC + +5 V IF VB VF1 - RL Noise Shield 1 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 VO B VO VFF 0.1 F VFF 4 5 + GND VF2 + - V02 0.1 F GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for HCPL2530M and HCPL2531M Test Circuit for 6N135M, 6N136M, and HCPL4503M VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Figure 16. Common Mode Immunity Test Circuit (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 10 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Test Circuits Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Reflow Profile TP Temperature (C) 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Maximum Ramp-up Rate = 3C/S Maximum Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 240 120 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60 to 120 s Ramp-up Rate (tL to tP) 3C/second maximum Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60 to 150 s Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 s Ramp-down Rate (TP to TL) 6C/s maximum Time 25C to Peak Temperature 8 minutes maximum Figure 17. Relow Profile (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 11 Part Number Package Packing Method 6N135M DIP 8-Pin Tube (50 units per tube) 6N135SM SMT 8-Pin (Lead Bend) Tube (50 units per tube) 6N135SDM SMT 8-Pin (Lead Bend) Tape and Reel (1,000 units per reel) 6N135VM DIP 8-Pin, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135SVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135SDVM SMT 8-Pin (Lead Bend), DIN EN/IEC 60747-5-5 Option Tape and Reel (1,000 units per reel) 6N135TVM DIP 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135TSVM SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tube (50 units per tube) 6N135TSR2VM SMT 8-Pin, 0.4" Lead Spacing, DIN EN/IEC 60747-5-5 Option Tape and Reel (1,000 units per reel) Note: The product orderable part number system listed in this table also applies to the 6N136M, HCPL4503M, HCPL2530M, and HCPL2531M product families. Marking Information 1 V 3 6N135 2 XX YY B 6 5 4 Figure 14. Top Mark Definitions 1 Fairchild Logo 2 Device Number 3 DIN EN/IEC60747-5-5 Option (only appears on component ordered with this option) 4 Two Digit Year Code, e.g., `15' 5 Two Digit Work Week Ranging from `01' to `53' 6 Assembly Package Code (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 12 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Ordering Information D0 P0 t K0 P2 E F A0 W1 d t P User Direction of Feed Symbol W W B0 Description D1 Dimension in mm Tape Width 16.0 0.3 Tape Thickness 0.30 0.05 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 7.5 0.1 2.0 0.1 P2 P Pocket Pitch A0 Pocket Dimensions 12.0 0.1 10.30 0.20 B0 10.30 0.20 K0 4.90 0.20 W1 d R Cover Tape Width 13.2 0.2 Cover Tape Thickness 0.1 Maximum Maximum Component Rotation or Tilt 10 Minimum Bending Radius 30 (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 www.fairchildsemi.com 13 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Carrier Tape Specifications (Option SD) D0 P0 t K0 P2 E F A0 W1 d P User Direction of Feed Symbol W Description D1 Dimension in mm Tape Width 24.0 0.3 Tape Thickness 0.40 0.1 P0 Sprocket Hole Pitch 4.0 0.1 D0 Sprocket Hole Diameter 1.55 0.05 E Sprocket Hole Location 1.75 0.10 F Pocket Location 11.5 0.1 t 2.0 0.1 P2 P Pocket Pitch 16.0 0.1 A0 Pocket Dimensions 12.80 0.1 B0 10.35 0.1 K0 5.7 0.1 W1 d R Cover Tape Width 21.0 0.1 Cover Tape Thickness 0.1 Maximum Maximum Component Rotation or Tilt 10 Minimum Bending Radius 30 (c)2008 Fairchild Semiconductor Corporation 6N13XM, HCPLXXXXM Rev. 1.7 W B0 www.fairchildsemi.com 14 Single-Channel: 6N135M, 6N136M, HCPL4503M Dual-Channel: HCPL2530M, HCPL2531M -- 8-Pin DIP High Speed Transistor Optocouplers Carrier Tape Specifications (Option TSR2) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com