1.27 mm pitch connector IDC type female connector for cable PCS-E( )F( ) For cable IDC (1.2 mm) Configuration of product Part No. PCS-E ( ) F ( ) Series name No. of contacts: 20, 28, 36, 50, 68, 80 or 96 Type of contact: Female Cable sizes for reference purposes (In case the cable sheath is made of PVC resin) Blank : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is 0.8-1.0 mm. For discrete wire. A : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insuration is 0.5-0.65 mm. For discrete wire. B : AWG#30(7 / 0.1). Outside diameter of wire is 0.5-0.65 mm. For discrete wire. C : AWG#28(7 / 0.127) For flat cable D : AWG#30(7 / 0.1) For flat cable (See Note #1) A B POS.#1 5.5 LAST POS. 7.3 POS.#2 2.54 1.27 15 C 13.2 5 1.27 B LAST POS. Note 1: This 96-contact connector is not available for flat cable. POS.#2 POS.#1 Cable cover for discrete wire Components Contacts Spacer Shell Insulator Cable cover Cable cover for flat cable Because some combinations of "Configurations of Product Part No.", are under consideration for development, please contact us for availability details. Mating connectors: PCS-E series through hole type male connector for PCB PCS-E series IDC type male connector for panel Tool: (Refer to page Tool-11) Through hole SMT Press-in IDC Wire Soldering Crimping wrapping Others Dimensions Part No. A B PCS-E20F( ) 21.65 11.43 C 15.4 PCS-E28F( ) 26.7 16.51 20.48 PCS-E36F( ) 31.8 21.59 25.56 PCS-E50F( ) 40.7 30.48 34.45 PCS-E68F( ) 52.1 41.91 45.88 PCS-E80F( ) 59.7 49.53 53.5 PCS-E96F( ) 69.9 59.69 63.66