FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM KAMAYA OHM RLC 1. Most suitable for a detection of current in power source circuits, motor circuits, etc. 2. Raised Rated dissipation compared with RMC (except 2512 size). 3. Stability Class : 5% *Dimensions W L c c d d Rated resistance is marked with 4-digit on the over coating. (RLC20~RLC63) RLC10 : only No marking is available. Please contact KAMAYA for marking of RLC16. H Chip Resistors *Features Unit : mm Metric 1005 1608 2012 3216 3225 5025 6332 Style RLC10 RLC16 RLC20 RLC32 RLC35 RLC50 RLC63 Inch 0402 0603 0805 1206 1210 2010 2512 L 1.00.05 1.60.1 2.00.15 3.10.2 3.10.2 5.00.2 6.30.2 W 0.5 0.05 0.15 0.8 0.05 1.250.10 1.6 0.15 2.5 0.15 2.5 0.15 3.2 0.15 H 0.35 0.05 0.45 0.10 0.6 0.1 0.6 0.1 0.6 0.15 0.6 0.15 0.6 0.15 c 0.20.1 0.30.1 0.40.2 0.50.25 0.50.25 0.60.2 0.60.2 d 0.25 0.05 0.10 0.30.1 0.40.2 0.3 0.2 0.1 0.3 0.2 0.1 0.60.2 0.60.2 *Unit weight/pc. 1mg 2mg 5mg 9mg 16mg 25mg 40mg *Values for reference Number Description *Part Example Style RLC 32 Product Type Size Code Metric 10 1005 16 1608 20 2012 32 3216 35 3225 50 5025 63 6332 16 K R470 F TP B TH * Packaging & Standard Qty. (Min.) Bulk (Loose Package) 1,000pcs. All Styles Paper Tape(2mm pitch) 10,000pcs. RLC10 TP Paper Tape Rated Resistance Inch 0402 0603 0805 1206 1210 2010 2512 e.g.: R050=50m ohm R100=100m ohm 1R00=1 ohm Temperature Coefficient of Resistance K 100 10-6/C 0~200 10-6/C - 0~250 10-6/C 0~300 10-6/C Tolerance on Rated Resistance F 1% G 2% J 5% TE Embossed Tape 5,000pcs. RLC16 RLC20 RLC32 4,000pcs. RLC35 RLC50 RLC63 *Refer to Tape and Packaging information on pages 46 and 47. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. KAMAYA OHM FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & LOW OHM Style RLC10 RLC16 RLC20 RLC32 RLC35 RLC50 RLC63 Rated Size Rated Dissipation Rated Current at 70C Range Resistance Metric W A Range (Inch) 1005 (0402) 1608 (0603) 2012 (0805) 3216 (1206) 3225 (1210) 5025 (2010) 6332 (2512) Note1. Rated Current = Note2. Rated Voltage = 0.19 1.11 100m3.3 0.125 0.27 1.58 100m3.3 0.25 0.33 0.31 2.56 0.5 0.38 3.16 0.66 0.44 3.63 0.75 0.47 3.87 1.0 0.55 4.47 Combinations of Rated Resistance Range,Temperature Isolation Category Temperature Coefficient of Resistance and Tolerance on Rated Resistance Range Voltage Temperature Coefficient Tolerance on Rated Resistance -6 C V of Resistance 10 /C Rated Resistance Range F, J F, G, J 100m180m F, G, J 0 250 200m430m F, G, J 0 200 470m3.3 F, G, J 0 300 0 200 100 100 55125 50m3.3 50m180m F, G, J 0 250 200m430m F, G, J 0 200 470m3.3 F, G, J 500 100 (Rated Dissipation)/(Rated Resistance) (Rated Dissipation)(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) " 55/125/56 ! Thederated values of dissipation for temperatures in excess of 70C shall be indicated by the following Curve. Percentage of the rated dissipation(%) J 100m220m 240m430m 470m3.3 # Lower Category Temperature Upper Category Temperature Duration of the Damp heat, Steady-State Test 100 -55C +125C 56 days Area of recommended operation 0 55 70 125 Ambient Temperature (C) Resistance Code Resistance 50m 51m 56m 60m 62m 65m 68m 70m 75m 80m R050 R051 R056 R060 R062 R065 R068 R070 R075 R080 82m 90m 91m 100m 110m 120m 130m 150m 160m 180m Code R082 R090 R091 R100 R110 R120 R130 R150 R160 R180 Resistance 200m 220m 240m 250m 270m 300m 330m 360m 390m 400m Code R200 R220 R240 R250 R270 R300 R330 R360 R390 R400 Resistance 430m 470m 500m 510m 560m 600m 620m 650m 680m 700m Code R430 R470 R500 R510 R560 R600 R620 R650 R680 R700 Resistance 750m 800m 820m 900m 910m 1.0 1.1 1.2 1.3 1.5 Code R750 R800 R820 R900 R910 1R00 1R10 1R20 1R30 1R50 Resistance 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 Code 1R60 1R80 2R00 2R20 2R40 2R70 3R00 3R30 Note3. Other nominal resistances values are also available, please contact KAMAYA for further information. Description Solderability Requirements No breakdown or flashover R1G ohm See Ratings Table DR1% No visible damage, legible marking In accordance with Clause 4.17.4.5 Resistance to soldering heat DR1% Rapid change of temperature DR1% No visible damage Climatic sequence DR5% No visible damage Damp test, steady state Endurance at 70C Endurance at the upper category temperature Adhesion DR5% No visible damage, legible marking DR5% No visible damage DR5% No visible damage Bend strength of the face plating DR1% Voltage proof Variation of resistance with temperature Overload No visible damage Test Methods RLC10,16 100Va.c.,60s RLC20~63 500Va.c.,60s Clause 4.8 Measuring temperature : +20C/+125C/+20C Clause 4.13 The applied voltage shall be 2.5 times of Rated Voltage, or equivalent current 2s. Clause 4.17 235C, 2s Clause 4.18 After immersion into the flux, the immersion into solder shall be carried out in Solder bath at 260C for 5s. Clause 4.19 5 cycles between -55C and +125C. Clause 4.23 Dry/Damp heat(12+12h cycle), first cycle/ Cold/Damp heat(12+12h cycle), remaining cycle./ D.C.Load. Clause 4.24 40C, 95%R.H., 56 days, test a) of Clause 4.24.2.1 Clause 4.25.1 Rated current, 1.5h "ON", 0.5h "OFF", 70C, 1,000h. Clause 4.25.3 125C, no-load, 1,000h. Clause 4.32 5N, 10s RLC10~35 Amount of bend : 3 mm Clause 4.33 RLC50, 63 Amount of bend : 1 mm Clause 4.7 Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 17 Chip Resistors RLC