SM/1N4001 THRU SM/1N4007, BY133 1.0 AMP. Silicon Rectifiers Voltage Range -50 to 1000 Volts Current -1.0 Ampere Features DO-41 Low forward voltage drop High current capability High reliability High surge current capability Mechanical Data Cases:JEDEC D0-41 Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Axial leads, solderable per MIL-STDLead: 202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: 250C/10 seconds/.375",(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Weight: 0.35 gram Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% 1N 1N 1N 1N 1N 1N 1N Units 4001 4002 4003 4004 4005 4006 4007 BY Type Number SM SM SM SM SM SM SM 133 4001 4002 4003 4004 4005 4006 4007 Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 1300 V Maximum RMS Voltage 35 70 140 280 420 560 700 910 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 1300 V Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length @TA = 75C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage @1.0A Maximum DC Reverse Current @ TA=25C at Rated DC Blocking Voltage @ TA=125C Maximum Full Load Reverse Current ,Full Cycle Average .375"(9.5mm) Lead Length @TL=75C Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance R JA ( Note 2 ) Operating and Storage Temperature Range TJ ,TSTG 1.0 A 30 A 1.0 V 5.0 50 uA uA 30 uA 15 50 pF C/W -55 to +125 / -55 to +125 C Notes:1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. Notes:2. Thermal Resistance from Junction to Ambient .375" (9.5mm) Lead Length. FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.2- TYPICAL FORWARD CHARACTERISTICS 1.0 20 INSTANTANEOUS FORWARD CURRENT. (A) AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATINGS AND CHARACTERISTIC CURVES (1N4001 THRU 1N4007/BY133) .8 .6 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length .4 .2 0 0 25 50 75 100 125 150 175 10 2 1.0 .4 .2 .1 Tj=25oC Pulse Width=300 s 1% Duty Cycle .04 .02 .01 .6 .8 o 1.4 1.5 50 100 40 8.3ms Single Half Sine Wave JEDEC Method 30 20 10 JUNCTION CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 1.2 FIG.4- TYPICAL JUNCTION CAPACITANCE FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 60 40 20 10 Tj=25 0C 6 4 2 1 0 1 2 6 4 8 10 20 40 FIG.5- TYPICAL REVERSE CHARACTERISTICS 10 4 Tj=100 0C 1.0 .4 .1 Tj=25 0C .04 .01 0 20 40 60 80 100 60 80 100 .1 .2 .4 1.0 2 4 REVERSE VOLTAGE. (V) NUMBER OF CYCLES AT 60Hz INSTANTANEOUS REVERSE CURRENT. ( A) 1.0 FORWARD VOLTAGE. (V) AMBIENT TEMPERATURE. ( C) 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 140 10 20 40 100