SPECIFICATION * Supplier : Samsung electro-mechanics * Samsung P/N : CL32A106KO9LNNE * Product : Multi-layer Ceramic Capacitor * Description : CAP, 10, 16V, 10%, X5R, 1210 A. Samsung Part Number Series Size Dielectric Capacitance Capacitance CL 32 A 106 K O 9 L N N E Samsung Multi-layer Ceramic Capacitor 1210 (inch code) L: 3.2 0.3 mm Thickness division Inner electrode X5R 10 10 % Rated Voltage 16 V Thickness 0.9 0.1 mm mm Low profile Ni Termination Cu Plating Sn 100% (Pb Free) Normal Product tolerance 2.5 0.2 W: Special Reserved for future use Packaging Embossed Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance Capacitance Tan (DF) Insulation Within specified tolerance Test condition 110% 1.00.2 Vrms 60~120 sec. 0.10 max. 10,000Mohm or 100Mohm Whichever is Smaller Rated Voltage Resistance Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) Humidity Capacitance change : within 12.5% 402, 90~95%RH, 500+12/-0hrs Tan : 0.125 max IR : 25* or Over Moisture Capacitance change : Resistance Tan : 0.125 max IR : 402, 90~95%RH, 500+12/-0hrs 12.5* or Over High Temperature Capacitance change : Resistance Tan : 0.125 max IR : within 12.5% With rated voltage within 12.5% With 150% of The rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.