BAS70-00-E3-08 - Vishay Semiconductors

BAS70-00 to BAS70-06

www.vishay.com Vishay Semiconductors

Rev. 2.2, 13-Feb-18 1Document Number: 85702

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Small Signal Schottky Diodes, Single and Dual

DESIGN SUPPORT TOOLS click logo to get started

FEATURES

• These diodes feature very low turn-on voltage

and fast switching

• These devices are protected by a PN junction

guard ring against excessive voltage, such as

electrostatic discharges

• AEC-Q101 qualified available

• Base P/N-E3 - RoHS-compliant, commercial grade

• Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

MECHANICAL DATA

Case: SOT-23

Weight: approx. 8.8 mg

Packaging codes/options:

18/10K per 13" reel (8 mm tape), 10K/box

08/3K per 7" reel (8 mm tape), 15K/box



Note

(1) Device on fiberglass substrate, see layout on next page

Note

(1) Device on fiberglass substrate, see layout on next page

Top View

BAS70-00

BAS70-05

BAS70-04

BAS70-06

Available

Models

PARTS TABLE

PART ORDERING CODE CIRCUIT CONFIGURATION TYPE MARKING REMARKS

BAS70-00 BAS70-00-E3-08 or BAS70-00-E3-18 Single 73

Tape and reel

BAS70-00-HE3-08 or BAS70-00-HE3-18

BAS70-04 BAS70-04-E3-08 or BAS70-04-E3-18 Dual serial 74

BAS70-04-HE3-08 or BAS70-04-HE3-18

BAS70-05 BAS70-05-E3-08 or BAS70-05-E3-18 Common cathode 75

BAS70-05-HE3-08 or BAS70-05-HE3-18

BAS70-06 BAS70-06-E3-08 or BAS70-06-E3-18 Common anode 76

BAS70-06-HE3-08 or BAS70-06-HE3-18

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Repetitive peak reverse voltage VRRM = VRRM = VR70 V

Forward continuous current (1) IF200 mA

Surge forward current (1) tp < 1 s IFSM 600 mA

Power dissipation (1) Ptot 200 mW

THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Thermal resistance junction to ambient air (1) RthJA 500 K/W

Junction temperature Tj125 °C

Storage temperature range Tstg -65 to +150 °C

Operating temperature range Top -55 to +125 °C

BAS70-00 to BAS70-06

www.vishay.com Vishay Semiconductors

Rev. 2.2, 13-Feb-18 2Document Number: 85702

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Pulse test; tp  300 μs

LAYOUT FOR RthJA TEST

Thickness:

Fiberglass 1.5 mm (0.059")

Copper leads 0.3 mm (0.012")

PACKAGE DIMENSIONS in millimeters (inches): SOT-23

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Reserve beakdown voltage IR = 10 μA (pulsed) V(BR) 70 V

Leakage current VR = 50 V IR20 100 nA

Forward voltage IF = 1.0 mA VF410 mV

Forward voltage (1) IF = 15 mA VF1000 mV

Diode capacitance VR = 0 V, f = 1 MHz CD1.5 2 pF

Reserve recovery time IF = IR = 10 mA, iR = 1 mA,

RL = 100 trr 5ns

17451

15 (0.59)

12 (0.47)

0.8 (0.03)

5 (0.2)

7.5 (0.3)

3 (0.12)

1 (0.4)

2 (0.8)

1.5 (0.06)

5.1 (0.2)

Foot print recommendation:

Rev. 8 - Date: 23.Sept.2009

17418

Document no.: 6.541-5014.01-4

0.9 (0.035)

1 (0.039)

0.9 (0.035)

1 (0.039)

1.43 (0.056)

0.45 (0.018)

0.35 (0.014)

2.8 (0.110)

3.1 (0.122)

0.45 (0.018)

0.35 (0.014)

0.45 (0.018)

0.35 (0.014)

0.1 (0.004) max.

2.35 (0.093)

2.6 (0.102)

0.175 (0.007)

0.098 (0.004)

1.15 (0.045)

0.9 (0.035)

1.20 (0.047)

0.95 (0.037) 0.95 (0.037)

2 (0.079)

0.7 (0.028)

0.9 (0.035)

0° to 8°

0.2 (0.008)

0.3 (0.012)

0.5 (0.020)

0.550 ref. (0.022 ref.)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

BAS70-05-V-GS08 BAS70-00-GS08 BAS70-06-GS08 BAS70-05-GS08 BAS70-04-GS08 BAS70-06-V-GS08

BAS70-02V-GS08 BAS70-00-V-GS18 BAS70-05-V-GS18 BAS70-06-V-GS18 BAS70-00-V-GS08 BAS70-04-V-GS08

BAS70-04-V-GS18 BAS70-00-E3-08 BAS70-05-E3-08 BAS70-05-E3-18 BAS70-06-E3-08 BAS70-00-E3-18

BAS70-04-HE3-18 BAS70-04-E3-08 BAS70-00-HE3-18 BAS70-05-HE3-08 BAS70-00-HE3-08 BAS70-05-HE3-18

BAS70-04-E3-18 BAS70-04-HE3-08 BAS70-06-E3-18 BAS70-06-HE3-18 BAS70-06-HE3-08 BAS581-02V-GS18

BAS16-GS08 BAS40-02V-GS08 BAS581-02V-GS08