Technical Data
web site: www.enmco.com © ENM Co.
ENM Company
5617 Northwest Highway, Chicago, IL 60646-6135
(773) 775-8400 • Fax: (773) 775-5968
Toll Free (888) 372-0465 • e-mail: customerservice@enmco.com
2013 ENM Co.®
211
Electronic Hour Meter, AC Hour Meter
T50 Series
ENM's Series T50 electronic AC hour meter is a low cost reliable
hour meter incorporating the latest state-of-the-art in electronics.
It's quartz-crystal time base insures accurate long term time-keeping.
A reliable electromechanical wheel-type indicator is used to store
accumulated hours.
This compact tamperproof meter is sealed against the environment
to provide years of service.
The T50 elapsed time indicator was designed for use on test and
recording equipment, for providing maintenance control, for
establishing warranty programs, for measuring machine utilization
and production time, or for any application where time-in-use is to
be determined.
T50A2, T50B2
Specifications
Time Scale: 6-digits 99,999.9 Hours
Automatic recycle to zero
Figures: Hours - White on black
Tenths - Red on white
Height - 0.140"
Operation Voltage: 230, 115, 48, 24 VAC +_10%
50/60 Hz
Other voltage available
Power Consumption: Less than 0.4 Watts
Accuracy: Better than +_0.02% over entire range
Temperature: -40˚F to +185˚F (-40˚C to +85˚C)
Vibration Resistance: Withstands 10-80 Hz at 20g's max.
(SAE J1378)
Shock: 55g at 9-13 ms (SAE J1378)
Humidity: 95% (SAE J1378)
Terminations: 1/4" male blade terminals
Configuration: Round SAE Bezel with new
push-on retaining ring
Round 3-Hole Bezel
Features
• Low Power Consumption
• Solid State Electronic Drive Circuit
• Quartz-Crystal for Accurate Timing
• Non-reset
• UL/cUL Recognized, CE & RoHS Compliant
• High Impact, Tamperproof Plastic Case
• IP65
• Indicates Operating Time in Hours and Tenths
• No Battery Back-Up Required
• Quiet operation
• MADE IN THE U.S.A.
Dimensional Data
© ENM Co.
ENM Company
5617 Northwest Highway, Chicago, IL 60646-6135
(773) 775-8400 • Fax: (773) 775-5968 • To ll Free (888) 372-0465
e-mail: customerservice@enmco.com
ISO 9001:2000 web site: www.enmco.com
LIMITED WARRANTY
ENM Company resettable electromechanical counters are warranted to the consumer to be free from defects in material and workmanship for a period of 3 years. All ENM
products which fall within the warranty period due to defects in material or workmanship will be repaired or replaced, at ENM’s option, without charge to the consumer when
returned with proof of purchase to any authorized ENM dealer in the United States, transportation charges prepaid, provided there is no evidence of improper installation, tampering,
2013 ENM Co.®
T50 Series
211
T50 Series
Q
Z
U
A
R
T
C
O
C
H
I
A
G
Q
Z
U
A
R
T
C
O
C
H
I
A
G
Q
Z
U
A
R
T
C
O
C
H
I
A
G
(T50 A)
(T50 B)
(T50 E)
PUSH-ON
RETAINING
RING
PUSH-ON
RETAINIG
RING
PANEL GASKET; UL/NEMA
PANEL GASKET; UL/NEMA
4X12 P/N A40047-S
4X12 WITH MTG
HARDWARE; P/N B20017
