MX25L3206EZNI-12GTR - MACRONIX INTERNATIONAL

ILLUMINATION

RoHS

COMPLIANT

No. E352519

LUXEON Z ES is a high power 1.6mm x 2.0mm LED that enables never

before seen color consistency, luminance, ux density and design

exibility for lighting solutions. LUXEON Z ES is undomed, a feature that

provides unmatched optical exibility for precise beam angle control.

Tested and binned at application conditions, 85°C, LUXEON Z ES emitters

are an ideal choice for indoor and outdoor light sources requiring

superior beam angles, higher ecacy and lower costs.

LUXEON Z ES

Extreme ux density in a micro footprint

package for precise optical control

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Micro footprint enables close packaging Architectural

Undomed design allows precise optical control Downlights

3- and 5-step MacAdam ellipse: Freedom from Binning enabling

color consistency Lamps

LM-80 test report available Outdoor

Spotlights

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Lumen Maintenance .................................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Optical Characteristics ...............................................................................4

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................5

Characteristic Curves .............................................................................6

Spectral Power Distribution Characteristics .............................................................6

Light Output Characteristics ..........................................................................7

Forward Current Characteristics......................................................................10

Radiation Pattern Characteristics .....................................................................12

Product Bin and Labeling Denitions ..............................................................14

Decoding Product Bin Labeling.......................................................................14

Luminous Flux Bins .................................................................................15

Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Color Bin Denition .................................................................................16

Forward Voltage Bins ...............................................................................17

Peak Wavelength Bins...............................................................................17

Mechanical Dimensions..........................................................................18

Soldering Reow Guidelines ......................................................................19

JEDEC Moisture Sensitivity ...........................................................................19

Solder Pad Design ..................................................................................20

Packaging Information...........................................................................21

Pocket Tape Dimensions ............................................................................21

Reel Dimensions ...................................................................................21

General Product Information

Product Test Conditions

LUXEON Z ES are tested and binned with a drive current of 700mA for 3V part or 40mA for 48V part at a junction temperature,

Tj, of 85°C.

Part Number Nomenclature

Part numbers for LUXEON Z ES follow the convention below:

L X Z A – B C D E – F

Where:

A – designates voltage (2=3V and H=48V)

B C – designates nominal ANSI CCT or color (eg. 27=2700K, 30=3000K and PR=Royal Blue)

D E – designates minimum CRI performance (70=70CRI, 80=80CRI, 90=90CRI, 02=Royal Blue)

F – designates white color space denition (3=3 SDCM and 5=5 SDCM, not used for Royal Blue)

Therefore, the following part number is used for a LUXEON Z ES White 3V, 3000K 80CRI LED, which is binned within a 3-step

MacAdam ellipse:

L X Z 2 – 3 0 8 0 – 3

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Z ES is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1a. Product performance of LUXEON Z ES 3V at 700mA and 350mA, Tj=85ºC.

NOMINAL

CCT

MINIMUM

CRI [1]

LUMINOUS FLUX [1] (lm)TYPICAL

LUMINOUS

EFFICACY (lm/W)

TYPICAL

LUMINOUS

FLUX (lm)

TYPICAL

LUMINOUS

EFFICACY (lm/W) PART NUMBER [2]

MINIMUM TYPICAL

700mA 350mA

4000K 70 220 240 122 132 139 LXZ2-4070

5000K 70 220 245 125 135 142 LXZ2-5070

5700K 70 220 245 125 135 142 LXZ2-5770

6500K 70 220 245 125 135 142 LXZ2-6570

2200K 80 140 150 77 83 87 LXZ2-2280-x

2700K 80 170 185 94 102 107 LXZ2-2780-x

3000K 80 180 195 99 107 113 LXZ2-3080-x

3500K 80 190 205 105 113 118 LXZ2-3580-x

4000K 80 190 220 112 121 127 LXZ2-4080-x

5000K 80 190 220 112 121 127 LXZ2-5080-x

2700K 90 140 160 82 88 92 LXZ2-2790-x

3000K 90 150 170 87 94 98 LXZ2-3090-x

3500K 90 150 171 87 94 98 LXZ2-3590-x

4000K 90 150 180 92 99 104 LXZ2-4090-x

5700K 90 170 190 97 105 110 LXZ2-5790-x

Table 1b. Product performance of LUXEON Z ES 48V at 40mA and 20mA, Tj=85ºC.

NOMINAL

CCT

MINIMUM

CRI [1]

LUMINOUS FLUX [1] (lm)TYPICAL

LUMINOUS

EFFICACY (lm/W)

TYPICAL

LUMINOUS

FLUX (lm)

TYPICAL

LUMINOUS

EFFICACY (lm/W) PART NUMBER [2]

MINIMUM TYPICAL

40mA 20mA

2700K 80 150 165 83 91 93 LXZH-2780-x

Table 1c. Product performance of LUXEON Z ES Royal Blue at 700mA, Tj=85ºC.

COLOR RADIOMETRIC POWER [1] (mW) TYPICAL RADIANT

EFFICIENCY (%) PART NUMBER

MINIMUM TYPICAL

Royal Blue 800 850 45% LXZ2-PR02

Notes for Tables 1a, 1b and 1c:

1. Lumileds maintains a tolerance of ±6.5% on both luminous ux and radiometric power and ±2 on CRI measurements.

2. In the part number the -x is the designation for the white color space requirement. On 80CRI and 90CRI versions 3 designates 3 SDCM and 5 designates 5 SDCM. For 70 CRI parts or lower,

they will not have an SDCM designation and all parts are binned within a 5-step SDCM.

Optical Characteristics

Table 2. Optical characteristics for LUXEON Z ES at 700mA.

PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2]

LXZ2-xxxx 140° 116°

LXZ2-xxxx-x 140° 116°

LXZH-xxxx-x 140° 116°

LXZ2-PR02 140° 120°

Notes for Table 2:

1. Total angle at which 90% of total luminous ux is captured.

2. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3a. Electrical and thermal characteristics for LUXEON Z ES at 700mA.

PART NUMBER

FORWARD VOLTAGE [1] (VF)TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE [1] (mV/°C)

TYPICAL THERMAL

RESISTANCE—JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

LXZ2-xxxx 2.5 2.8 3.25 -1.6 3

LXZ2-xxxx-x 2.5 2.8 3.25 -1.6 3

Notes for Table 3a:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 110°C.

Table 3b. Forward voltage and typical thermal resistance for LUXEON Z ES at 40mA.

PART NUMBER

FORWARD VOLTAGE [1] (VF)TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE [1] (mV/°C)

TYPICAL THERMAL

RESISTANCE—JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

LXZH-xxxx-x 48.5 49.0 50.5 -30 3

Notes for Table 3b:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 110°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON Z ES.

PARAMETER MAXIMUM PERFORMANCE

DC Forward Current [1, 2] 45mA for LXZH-xxxx-x

1200mA for LXZ2-xxxx

Peak Pulsed Forward Current [1, 3] 65mA for LXZH-xxxx-x

1350mA for LXZ2-xxxx

LED Junction Temperature [1] (DC & Pulse) 135°C for LXZx-xxxx

ESD Sensitivity Class 3B

Operating Case Temperature -40°C to 135°C

LED Storage Temperature -40°C to 135°C

Soldering Temperature JEDEC 020c 260°C

Allowable Reow Cycles 3

Reverse Voltage (Vreverse) [4, 5] LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain junction temperature below the maximum.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. Pulsed operation with the maximum peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.

4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse

voltage does not exceed 5V and the reverse current is less than 200uA.

5. A maximum 5V reverse voltage for up to 10s is an acceptable beginning of life, one time, test.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1. Typical normalized power vs. wavelength for LXZx-xxxx at test current, Tj=85ºC.

Figure 2. Typical normalized power vs. wavelength for LXZ2-PR02 at 700mA, Tj=85ºC.

Light Output Characteristics

Figure 3a. Typical normalized light output vs. junction temperature for LXZx-xxxx, at test current.

Figure 3b. Typical normalized light output vs. forward current for LXZH-xxxx-x, Tj=85ºC.

Figure 4b. Typical normalized light output vs. forward current for LXZx-xxxx, Tj=85ºC.

Figure 4a. Typical normalized light output vs. junction temperature for LXZ2-PR02, at test current.

Figure 4c. Normalized radiometric power vs. forward current for LXZ2-PR02, Tj=85ºC.

Forward Current Characteristics

Figure 5a. Typical forward current vs. forward voltage for LXZx-xxxx, Tj=85ºC.

Figure 5b. Typical forward current vs. forward voltage for LXZH-2780-x, Tj=85ºC.

Figure 5c. Typical forward current vs. forward voltage for LXZ2-PR02, Tj=85ºC.

Radiation Pattern Characteristics

Figure 6a. Typical radiation pattern for LXZx-xxxx (white only) at test current.

Figure 6b. Typical radiation pattern for LXZ2-PR02 at test current.

Figure 7b. Typical polar radiation pattern for LXZ2-PR02 at test current.

Figure 7a. Typical polar radiation pattern for LXZx-xxxx (white only) at test current.

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON Z ES White LEDs are labeled using a 4-digit alphanumeric CAT code following the format below.

A B C D

A – designates luminous ux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens)

B C – designates white color bins (example: 5A, 5B, 5C, 5D, 3U, 3L for 3000K parts)

D – designates forward voltage bin (example: X =2.65 to 2.85V, Y=2.85 to 3.00V)

Therefore, a LUXEON Z ES white LED with a lumen range of 200 to 210, color bin of 5D and a forward voltage range of 2.65 to

2.85V has the following CAT code:

L 5 D X

LUXEON Z ES Royal Blue LEDs are labeled using a 3-digit alphanumeric CAT code following the format below.

A B C

A – designates luminous ux/radiometric power bin (example: L=200 to 210 lumens, M=210 to 220 lumens)

B – designates Royal Blue peak wavelength bins (example: 3 for peak wavelength of 440nm to 445nm)

C – designates forward voltage bin (example: P=2.5 to 2.75V, R=2.75 to 3.00V)

Therefore, a LUXEON Z ES Royal Blue with a radiometric power of 1000mW to 1050mW, peak wavelength bin of 3 and a forward

voltage range of 2.5 to 2.75V has the following CAT code:

Q 3 P

Luminous Flux Bins

Table 5 lists the standard photometric luminous ux bins for LUXEON Z ES emitters. Although several bins are outlined, product

availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ux bin denitions for LUXEON Z ES.

BIN LUMINOUS FLUX [1] (lm)

MINIMUM MAXIMUM

D 130 140

E 140 150

F 150 160

G 160 170

H 170 180

J 180 190

K 190 200

L 200 210

M 210 220

N 220 230

P 230 240

Q 240 250

R 250 260

S 260 270

T 270 280

U 280 290

Notes for Table 5:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements.

Radiometric Power Bins

Table 6. Radiometric power bin denitions for LXZ2-PR02.

BIN CODE RADIOMETRIC POWER [1] (mW)

MINIMUM MAXIMUM

L 800 850

M 850 900

N 900 950

P 950 1000

Q 1000 1050

R 1050 1100

S 1100 1150

Notes for Table 6:

1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.

Color Bin Denitions

Table 7. 3- and 5-step MacAdam ellipse color bin denitions for LUXEON Z ES.

NOMINAL CCT COLOR SPACE [1] CENTER POINT [2]

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

bELLIPSE ROTATION

2200K Single 3-step MacAdam ellipse (0.5020, 0.4156) 0.00863 0.00398 49.27°

2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70°

3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.20°

3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.0°

4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.70°

5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.60°

2200K Single 5-step MacAdam ellipse (0.5020, 0.4156) 0.01438 0.00663 49.27°

2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70°

3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.20°

3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.00°

4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.70°

5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.60°

5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09°

6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57°

Notes for Table 7:

1. 3-step is available in 80CRI and 90CRI, and 5-step is available in 70CRI, 80CRI and 90CRI.

2. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates in the CIE color space.

Figure 8. Color space denition for LUXEON Z ES. Figure 9. 3- and 5-step MacAdam ellipse illustration for Table 7.

Table 8. MacAdam ellipse color bin denitions for LXZ2-xxxx and LXZH-xxx-x.

BIN SDCM

30 3-step MacAdam ellipse (80, 90CRI)

3U 3-step MacAdam ellipse (80, 90CRI)

3L 3-step MacAdam ellipse (80, 90CRI)

50 5-step MacAdam ellipse (70CRI)

5A 5-step MacAdam ellipse (70, 80, 90CRI)

5B 5-step MacAdam ellipse (70, 80, 90CRI)

5C 5-step MacAdam ellipse (70, 80, 90CRI)

5D 5-step MacAdam ellipse (70, 80, 90CRI)

Forward Voltage Bins

Table 9a. Forward voltage bin denitions for LXZ2-xxxx.

BIN FORWARD VOLTAGE [1] (VF)

MINIMUM MAXIMUM

P 2.50 2.75

R 2.75 3.00

S 3.00 3.25

X 2.65 2.85

Y 2.85 3.00

Notes for Table 9a:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

Table 9b. Forward voltage bin denitions for LXZH-xxxx-x.

BIN FORWARD VOLTAGE [1] (VF)

MINIMUM MAXIMUM

E 48.5 49.0

F 49.0 49.5

G 49.5 50.0

H 50.0 50.5

Notes for Table 9b:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

Peak Wavelength Bins

Table 10. Peak wavelength bins for LXZ2-PR02.

BIN PEAK WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

3 440 445

4 445 450

5 450 455

Notes for Table 10:

1. Lumileds maintains a tolerance of ±2nm on peak wavelength measurements.

Mechanical Dimensions

Notes for Figure 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 10. Mechanical dimensions for LUXEON Z ES.













 















Soldering Reow Guidelines

Table 11. Reow prole characteristics for LUXEON Z ES.

PROFILE FEATURE LEAD FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 60 to 120 seconds

Ramp-Up Rate (TL to Tp) 3°C / second maximum

Liquidus Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 60 to 150 seconds

Peak / Classication Temperature (Tp) 260°C

Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds

Ramp-Down Rate (Tp to TL) 6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 12. Moisture sensitivity levels for LUXEON Z ES.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

Figure 11. Temperature prole for Table 11.

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Solder Pad Design

Notes for Figure 12:

1. All dimensions are in millimeters.

2. The gure shows one of the LUXEON Z ES layouts for close-packing design on Printed Circuit Board (PCB). For more information on assembly and additional layouts, please refer to

LUXEON Z ES Application Brief (AB120).

3. The *.dwg les are available at lumileds.com.

Figure 12. Solder pad layout for LUXEON Z ES.

Packaging Information

Pocket Tape Dimensions

Notes for Figure 13:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Reel Dimensions

Notes for Figure 14:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 14. Reel dimensions for LUXEON Z ES.

Figure 13. Tape dimensions for LUXEON Z ES.

DS134 LUXEON Z ES

Product Datasheet 20170223

LUXEON is a registered trademark of the Lumileds Holding B.V.

in the United States and other countries.

lumileds.com

Lumileds Holding B.V. shall not be liable for any kind of loss of data or any other damages, direct,

indirect or consequential, resulting from the use of the provided information and data. Although

Lumileds Holding B.V. has attempted to provide the most accurate information and data, the

materials and services information and data are provided “as is” and Lumileds Holding B.V.

neither warranties, nor guarantees the contents and correctness of the provided information

and data. Lumileds Holding B.V. reserves the right to make changes without notice. You as user

agree to this disclaimer and user agreement with the download or use of the provided materials,

information and data.

About Lumileds

Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking

LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.

With a rich history of industry “rsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by

maintaining an unwavering focus on quality, innovation and reliability.

To learn more about our portfolio of light engines, visit lumileds.com.