RB520ZS-30
Diodes
Rev.C 1/3
Schottky Barrier Diode
RB520ZS-30
zApplications
General rectification
zFeatures
1)
Ultra small mold type.(GMD2)
2) Low IR
3) High relia bility
zConstruction
Silicon epitaxial planar
zDimensions (Unit : mm)
zLand size figure (Unit : mm)
zT aping dimensions (Unit : mm)
zStructure
zA bsolute maximum ratings (Ta=25°C)
zElectrical characteristic (Ta=25°C)
0.6±0.05
0.3±0.05 0.3±0.03
0～0.03
0.38±0.03
0.27±0.03
0.57±0.05
0.19±0.03
Ａ
JEDEC : -
ROHM : GMD2
JEITA : -
dot(year week factory)
GMD2
0.31
0.38
0.23
Symbol Min. Typ. Max. Unit
Forward voltage V
F
--0.46V
I
F
=10mA
I
R
--0.3µA
V
R
=10V
Reverse cur r ent
Parameter Conditions
Symbol Unit
V
R
V
Io mA
I
FSM
mA
Tj ℃
Tstg ℃
Parameter
Reverse voltage (DC)
Average rectified forward current
-40 to +150
Limits
30
100
Junction temperature
Storage temperature
Forward current surge peak （60Hz・1cyc）500
150
RB520ZS-30
Diodes
Rev.C 2/3
zElectrical characteristic curves
0.1
1
10
100
1000
10000
100000
1000000
0 102030
Ta=150℃
0.1
1
10
100
0 100 200 300 400 500 600 700
Ta=150℃
0
10
20
30
40
50
60
70
80
90
100
10
100
1000
10000
0.001 0.01 0.1 1 10 100 1000
Rth(j-a)
Rth(j-c)
1
10
0 102030
FORWARD VOLTAGE：VF(mV)
VF-IF CHARACTERISTICS
FORWARD CURRENT:IF(mA)
0
0.05
0.1
0.15
0 0.05 0.1 0.15 0.2
REVERSE CURRENT:IR(nA)
REVERSE VOLTAGE：VR(V)
VR-IR CHARACTERISTICS
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
VF DISPERSION MAP
FORWARD VOLTAGE:VF(mV)
REVERSE CURRENT:IR(nA)
IR DISPERSION MAP
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ct DISPERSION MAP
0
5
10
15
20
25
30
35
40
45
50
AVE:6.3pF
Ta=25℃
f=1MHz
VR=0V
n=10pcs
IFSM DISPERSION MAP
PEAK SURGE
FORWARD CURRENT:IFSM(A)
PEAK SURGE
FORWARD CURRENT:IFSM(A)
NUMBER OF CYCLES
IFSM-CYCLE CHARACTERISTICS
PEAK SURGE
FORWARD CURRENT:IFSM(A)
TIME:t(ms)
IFSM-t CHARACTERISTICS
0
5
10
15
20
25
30
AVE:4.30A
8.3ms
Ifsm
1cyc
0
5
10
110100
8.3ms
Ifsm
1cyc
8.3ms
0
5
10
1 10 100
t
Ifsm
TIME:t(s)
Rth-t CHARACTERISTICS
TRANSIENT
THAERMAL IMPEDANCE:Rth (℃/W)
FORWARD POWER
DISSIPATION:Pf(W)
AVERAGE RECTIFIED
FORWARD CURRENT：Io(A)
Io-Pf CHARACTERISTICS
REVERSE POWER
DISSIPATION:P
R
(W)
REVERSE VOLTAGE:VR(V)
VR-P
R
CHARACTERISTICS
Ta=125℃
Ta=75℃
Ta=25℃
Ta=-25℃
f=1MHｚ
0
0.002
0.004
0.006
0.008
0.01
0102030
DC
D=1/2
Sin(θ＝180)
380
390
400
410
420
430
AVE:405.76mV
Ta=25℃
VF=10mA
n=30pcs
Ta=125℃
Ta=-25℃
Ta=25℃
Ta=75℃
Ta=25℃
VR=10V
n=30pcs
AVE:19.93nA
DC
D=1/2
Sin(θ＝180)
1ms
IM=10mA IF=50mA
300us
time
Mounted on epoxy board
RB520ZS-30
Diodes
Rev.C 3/3
AMBIENT TEMPERATURE:Ta(℃)
Derating Curve (Io-Ta)
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
AVERAGE RECTIFIED
FORWARD CURRENT:Io(A)
CASE TEMPARATURE:Tc(℃)
Derating Curve (Io-Tc)
0
0.05
0.1
0.15
0.2
0.25
0.3
0 25 50 75 100 125 150
0
0.05
0.1
0.15
0.2
0.25
0.3
0 25 50 75 100 125 150
Sin(θ＝180)
DC
D=1/2
Sin(θ＝180)
DC
D=1/2
TTj=150℃
D=t/T
tVR
Io
VR=15V
0A
0V
TTj=150℃
D=t/T
tVR
Io
VR=15V
0A
0V
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
Appendix1-Rev2.0
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System THE AMERICAS / EUROPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co.jp
www.rohm.com
Copyright © 2008 ROHM CO.,LTD.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level
of reliability and the malfunction of which would directly endanger human life (such as medical
instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers
and other safety devices), please be sure to consult with our sales representative in advance.
It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance
of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow
for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in
order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM
cannot be held responsible for any damages arising from the use of the products under conditions out of the
range of the specifications or due to non-compliance with the NOTES specified in this catalog.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix
