RB520ZS-30 Diodes Schottky Barrier Diode RB520ZS-30 00.03 ROHM : GMD2 JEDEC : JEITA : dot(year week factory) 0.270.03 0.30.05 zConstruction Silicon epitaxial planar 0.570.05 0.190.03 zFeatures 1) Ultra small mold type.(GMD2) 2) Low IR 3) High reliability 0.380.03 zDimensions (Unit : mm) 0.60.05 zApplications General rectification 0.30.03 zLand size figure (Unit : mm) zStructure 0.38 0.23 0.31 GMD2 zTaping dimensions (Unit : mm) zAbsolute maximum ratings (Ta=25C) Parameter Reverse voltage (DC) Average rectified forward current Forward current surge peak 60Hz1cyc Junction temperature Storage temperature Limits 30 100 500 150 -40 to +150 Symbol VR Io IFSM Tj Tstg Unit V mA mA zElectrical characteristic (Ta=25C) Parameter Forward voltage Reverse current Symbol VF Min. - Typ. - Max. 0.46 Unit V IR - - 0.3 A Conditions IF=10mA VR=10V Rev.C 1/3 RB520ZS-30 Diodes zElectrical characteristic curves 1000000 Ta=125 10 Ta=75 Ta=25 Ta=-25 1 REVERSE CURRENT:IR(nA) 10000 Ta=75 Ta=25 100 10 Ta=-25 1 100 200 300 400 500 600 700 FORWARD VOLTAGEVF(mV) VF-IF CHARACTERISTICS 1 0 430 10 20 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 400 390 80 60 50 AVE:19.93nA 40 30 20 25 20 AVE:6.3pF 15 10 5 0 Ct DISPERSION MAP 20 1cyc 15 AVE:4.30A 5 0 10 Ifsm PEAK SURGE FORWARD CURRENT:IFSM(A) PEAK SURGE FORWARD CURRENT:IFSM(A) 8.3ms 8.3ms 8.3ms 1cyc 5 Ifsm t 5 0 0 1 10 1 100 Mounted on epoxy board 0.15 D=1/2 IF=50mA 10 100 TIME:t(ms) IFSM-t CHARACTERISTICS NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS IFSM DISPERSION MAP IM=10mA 30 IR DISPERSION MAP Ifsm 10 35 0 10 25 Ta=25 f=1MHz VR=0V n=10pcs 40 10 VF DISPERSION MAP 30 30 45 70 AVE:405.76mV 20 50 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 410 10 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS Ta=25 VR=10V n=30pcs 90 REVERSE CURRENT:IR(nA) 420 10000 0 30 100 Ta=25 VF=10mA n=30pcs 380 PEAK SURGE FORWARD CURRENT:IFSM(A) f=1MH 0.1 0 0.01 DC 0.008 1ms 1000 time Rth(j-a) 300us 100 Rth(j-c) FORWARD POWER DISSIPATION:Pf(W) TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 10 Ta=125 1000 0.1 FORWARD VOLTAGE:VF(mV) Ta=150 100000 REVERSE POWER DISSIPATION:PR (W) FORWARD CURRENT:IF(mA) Ta=150 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 100 0.1 Sin(180) 0.05 0.006 DC Sin(180) 0.004 D=1/2 0.002 10 0.001 0 0.01 0.1 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 0 0 0.05 0.1 0.15 AVERAGE RECTIFIED FORWARD CURRENTIo(A) Io-Pf CHARACTERISTICS 0.2 0 10 20 30 REVERSE VOLTAGE:VR(V) VR-PR CHARACTERISTICS Rev.C 2/3 RB520ZS-30 Diodes 0.3 0.25 t 0.2 DC T 0.15 VR D=t/T VR=15V Tj=150 D=1/2 0.1 0.05 Sin(180) 0 Io 0A 0V Io 0A 0V AVERAGE RECTIFIED FORWARD CURRENT:Io(A) AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 0.3 t 0.25 0.2 T DC 0.15 VR D=t/T VR=15V Tj=150 D=1/2 0.1 0.05 Sin(180) 0 0 25 50 75 100 125 AMBIENT TEMPERATURE:Ta() Derating Curve (Io-Ta) 150 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc() Derating Curve (Io-Tc) Rev.C 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0