Model MM4xMS-1 Model MM4xMS-14 Triple Balanced Mixer RF 1.5 to 9.0 GHz Multi-Octave Band Electrical Specifications: Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: (1) Specifications Conditions RF (GHz) 2.0-9.0 1.5-9.0 LO (GHz) 2.0-9.0 1.5-9.0 1.5-3.0 3.0-9.0 1.5-9.0 IF (MHz) 10-3000 10-4000 Min 15 dB 20 dB 22 dB 1.5-9.0 Typical 8.0 dB 7.3 dB 18 28 32 27 Max 9.0 dB 9.5 dB Model MM4xMS-1 Model MM4xMS-14 dB dB dB dB Input 1 dB Compression Point: 1.5-9.0 1.5-9.0 10-4000 +5 dBm +8 dBm +12 dBm +15 dBm MM44 MM46 MM47 MM48 Input Third Order Intercept Point: 1.5-9.0 1.5-9.0 10-4000 +14 +17 +21 +24 dBm dBm dBm dBm MM44 MM46 MM47 MM48 LO Power: (4) 1.5-9.0 1.5-9.0 10-4000 +10 +13 +17 +21 dBm dBm dBm dBm MM44 MM46 MM47 MM48 LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within 0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100C and improves less than 0.5 dB at -54C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM4xMS-1 Outline: MS2A Typical Performance at 25C RF to IF Isolation - dB z MM4xMS-14 Outline: MS2B Relative Conv. Loss vs. IF Freq.-dB All dimensions are in inches and [mm]. CT Spectrum Microwave * 2144 Franklin Drive N.E. * Palm Bay, FL 32905 * PH (888) 553-7531 * Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave * 2707 Black Lake Place * Philadelphia, PA 19154 * PH (215) 464-4000 * Fax (215) 464-4001 REV B 5/24/10