RM04FR604CT - Cal-Chip Electronics - Datasheet.Technology

Cal-Chip Electronics, Incorporated

Thick Film Chip Resistors - RM Series

“Fixed Chip Resistors” manufactured for more compact electronic com-

ponents and automatic mounting system.

These Chip Resistors have electrical stability and mechanical stress

due to used reliable metal glazed paste printed on Alumina substrate.

Resistors will reduce your cost and save developmental time.

FEATURES

1. Very small, thin and light weight.

2. Both flow soldering and reflow soldering are applicable.

3. Owing to the reduced lead inductance, the high frequency

characteristic is excellent.

4. Suitable size and packaging for surface mount assembly.

PART NUMBERING

1. Code Designation: Thick Film Chip Resistors

2. Dimensions: RM02 0.6x0.3mm; RM04 1.0x0.5mm;

RM06 1.6x.8mm; RM10 2.0x1.25mm;

RM12 3.2x1.6mm; RM14 3.2x2.65mm;

RM20 5.0x2.5mm; RM25 6.3x3.1mm

3. Resistance Tolerance: F: ±1%; J: ±5%

4. Nominal Resistance: 5% - 3 Digit

1st 2 significant 3rd

is multiplier (10x)

000 = jumper “0” ohm

1% - 4 digit

1st 3 significant

4th multiplier (10x)

5. Packaging:

(EX) 0805 5% 10ohm

RM 10 J 100

CT

12345

RM S

ERIES

CT = Tape and reel*

*Note: Calchip has completed the Lead-Free transition. All parts shipped with or without the "custom designator" LF at the end

of the part number will be Lead-Free. Lead-Free material will still continue to have an LF at the end of the Lot Code and a green

RoHS symbol on the label. Please contact your sales associate if you require non-RoHS material.

0201 Chip Resistors

( RM02 Series )

Dimensions:

UNIT: mm

Type L W C d t

RM02 0.6 ±0.03 0.3 ±0.03 0.1 ±0.05 0.15 ±0.05 0.25 ±0.05

Ratings & Characteristics :

Resistance Range(Ω)

Type

Power

Rating

at 70℃

Rated

Voltage

Max.

Working

Voltage

Max.

Over- Load

Voltage

T.C.R

(PPM/℃) F(±1%)

E-96

G(±2%)

E-24

J(±5%)

E-24

±200 10Ω-1MΩ10Ω-1MΩ 10Ω-10MΩ

RM02 1/20W Refer 5.2 25V 50V +600

-200

1-9.1Ω

OΩ THICK FILM CHIP RESISTORS

Type Rated Current Max Overload Current Resistance Range

RM02 0.5 1

50mΩ MAX

Operating Temp(℃): : -55℃ 〜 +125℃

Cal-Chip Electronics, Incorporated

Thick Film Chip Resistors

PERFORMANCE CHARACTERISTICS (Tested per MIL-STD-202 Oper. Temp. -55c ~ 125c)

DIMENSIONS Inches (mm)

Type

RM04

RM06

RM10

RM12

RM14

RM20

RM25

Package

Size

0402

0603

0805

1206

1210

2010

2512

Power Rating

(Watts)

1/16 @ 70°C

1/10 @ 70°C

1/8

@ 70°C

1/4 @ 70°C

1/3 @ 70°C

1/2 @ 70°C

1 @ 70°C

Maximum

Working

Voltage

50V

150V

200V

Maximum

Overload

Voltage

100V

300V

400V

Resistance

Temperature

Coefficient

±500ppm/°C

±200ppm/°C

±400ppm/°C

±200ppm/°C

±100ppm/°C

±400ppm/°C

±200ppm/°C

±100ppm/°C

±400ppm/°C

±200ppm/°C

±100ppm/°C

±400ppm/°C

±200ppm/°C

±100ppm/°C

±400ppm/°C

±200ppm/°C

±100ppm/°C

±400ppm/°C

±200ppm/°C

±100ppm/°C

Resistance

Range

.1Ω - 9.1Ω

10Ω - 10 M

10Ω - 1 M

.1Ω- 9.1Ω

1 M - 10 M

10Ω - 10 M

10Ω - 1 M

.1Ω - 9.1Ω

1 M - 10 M

10Ω - 20 M

10Ω - 1 M

.1Ω - 9.1Ω

1 M - 10 M

10Ω - 20 M

10Ω - 1 M

.1Ω - 9.1Ω

1 Μ - 10 M

10Ω - 10 M

10Ω - 1 M

.1Ω - 9.1Ω

10Ω - 10 M

10Ω - 1 M

.1Ω - 9.1Ω

10Ω - 10 M

10Ω - 1 M

Tolerance

±5% / 1%

±5%

±1%

±5% / 1%

±1%

±5%

±1%

±5% / 1%

±1%

±5%

±1%

±5% / 1%

±1%

±5%

±1%

±5% / 1%

±1%

±5%

±1%

±5% / 1%

±5%

±1%

±5% / 1%

±5%

±1%

Current

Rating

of Jumper3

1A max.

2A max.

3A max.

Body Length (L)

0.39+.004/-.002 (1.0+0.10/-0.05)

.063±.004 (1.60±0.10)

.078±.008 (2.00±0.20)

.122±.004 (3.10±0.10)

.197±.008 (5.00±0.20)

.248±.008 (6.30±0.20)

Body Width (W)

.020+.004/-.002 (0.50+.10/-0.05)

.031+.006/-.002 (0.80+0.15/-0.05)

.049±.008 (1.25±0.20)

.061±.004 (1.55±0.10)

.100±.004 (2.55±0.10)

.098±.008 (2.50±0.20)

.124±.008 (3.15±0.20)

Body Height (H)

.014±.002 (0.35±0.05)

.018±.004 (0.45±0.10)

.018±.004 (0.45±0.15)

.021+.004/-.002 (0.55+0.10/-0.05)

.021±.004 (0.55±0.10)

Top Terminator (a)

.008±.004 (0.20±0.10)

.010±.004 (0.25±0.10)

.016±.008 (0.40±0.20)

.018±.008 (0.45±0.20)

.020±.008 (0.50±0.20)

Bottom Terminator (b)

.010+.008/-.004 (0.25+0.20/-0.10)

.012+.008/-.004 (0.30+0.20/-0.10)

.020±.008 (0.50±0.20)

Type

RM04

RM06

RM10

RM12

RM14

RM20

RM25

NOTES

RM SERIES

1. RM04 J & F are not marked

2. Zero Ohm (0.05 max.) jumper available in all sizes

3. EIA, E24 and E96 resistance ranges apply

4. Higher and lower values available. Consult Factory.

Cal-Chip Electronics, Incorporated

Thick Film Chip Resistors

MARKING

Resistance value in three digit designation system is marked on the

glasscoat. Illustrated is a resistor of 15KΩ. Four digit resistance desig-

nation system is applied to RM12 and E-96 Series. For example, 1502

designated 15KΩ. (The last digit specifies the number of zeros.)

1. For E-24 Series (±5%-J and ±10%-K Tolerances)

In 0603, 0805, 1206, 1210, 2010 and 2512 sizes:

3 DIGIT SYSTEM - First two digits are significant and

third digit is multiplier, “R” indicates decimal on values

under 10 ohms.

Examples: 100 = 10 ohms 102 = 1k ohms

470 = 47 ohm 103 = 10k ohms

101 = 100 ohms 104 = 100k ohms

105 = 1 megohms

2. For E-96 Series (±1%-F Tolerance)

In 0805, 1206, and 1210sizes:

4 DIGIT SYSTEM - First three digits are significant and

fourth digit is multiplier, “R” indicates decimal on values

under 10 ohms.

Examples: 10R0 = 10 ohms 1003 = 100k ohms

1000 = 100 ohms 1004 = 1 megohms

1001 = 1k ohms 1052 = 10.5k ohms

1002 = 10k ohms 2213 = 221k ohms

3. For E-96 Series (±1%-F Tolerance) in 0603 size

3 DIGIT SYSTEM (Due to space restrictions)

ITEMS

Moisture Resistance, Ther mal Shock

Low Temperature Exposure

Load Life

Load Life in Moisture

Vibration

Resistance to Soldering Heat

Solderability

Heat Resistance

Terminal Strength

Dielectric Withstanding Voltage

Short Time Overload

Insulation Resistance

Voltage Coefficient

SPECIFICATIONS,REQUIREMENT

±(1%+0.05Ω), No Mechanical Damage

±(3%+0.1Ω), No Mechanical Damage

<1 meg ±(3%+0.1Ω), ≥1 meg ±5%

±(1%+0.05Ω), No Mechanical Damage

min.95% coverage

±(1%+0.05Ω)

±(3%+0.1Ω), No Mechanical Damage

±(1%+0.05Ω), No Mechanical Damage

No Insulation Breakdown

±(1%+0.05Ω), No Evidence of Arc

1,000 meg minimum

+0/-100ppm/V (above 1K±)

TESTED PER EIA J-RC-2690A

-55°C to +125°C, 5 cycles

-55°C, 1,000 Hours

70°C, rated voltage, 1.5hr on/0.5hr off, 1,000 hrs

40°C, 95% R.H., 1.5hr on/0.5hr off, 1,000 hrs

10-55 Hz, 3 direction, each 2 hours

270°C, 10 seconds

230°C, 3 seconds, flux applied1

+150°C, 10 minutes

-125°C, 1,000 hours

500G load, 30 seconds

1/45mm bend, 10 seconds

500V, 1 minute

2 1/2 times rated voltage, 5 seconds

500V, 1 minute

Rated Voltage & 1/10 times rated voltage

TYPICAL

Within ±0.2%

Within ±0.5%

See Graph

Within ±0.1%

See Graph

More than 97%

Within ±0.3%

Within ±0.5%

Within ±0.2%

Above 900V

Within ±0.4%

Above 106meg

Within -90ppm/V

E-24

Value

100

110

120

130

150

160

180

200

220

240

270

300

330

360

390

430

470

510

560

620

680

750

820

910

Value

100

110

121

133

147

162

178

196

215

237

261

287

316

348

383

422

464

511

562

619

681

750

825

909

Code

01

05

09

13

17

21

25

29

33

37

41

45

49

53

57

61

65

69

73

77

81

85

89

93

Value

102

113

124

137

150

165

182

200

221

243

267

294

324

357

392

432

475

523

576

634

698

768

845

931

Code

02

06

10

14

18

22

26

30

34

38

42

46

50

54

58

62

66

70

74

78

82

86

90

94

Value

105

115

127

140

154

169

187

205

226

249

274

301

332

365

402

442

487

536

590

649

715

787

866

953

Code

03

07

11

15

19

23

27

31

35

39

43

47

51

55

59

63

67

71

75

79

83

87

91

95

Value

107

118

130

143

158

174

191

210

232

255

280

309

340

374

412

453

499

549

604

665

732

806

887

976

Code

04

08

12

16

20

24

28

32

36

40

44

48

52

56

60

64

68

72

76

80

84

88

92

96

E-96

A B C D E F X

10010110210310410510-1

*For 1%, a 3-digit alpha-numeric marking system is

used as follows.

Material

Alumina Porcelain

Ruthenium-Oxide Film

Boro-Silicated Acid Lead Glass

100% matte Tin (Electrical Plated) over

Nickel (Electrical Plated) over

AG-PD (Silver Palladium[Glaze Printed])

Remarks (Reference Only)

Purity 90% min.

20 Microns Thick

3 Microns Thick

8 Microns Thick

Feature

Substrate

Resistive Film

Coating

Terminations

MATERIALS

PERFORMANCE CHARACTERISTICS

Adhesion Curing

Dry Heat

Pull

Board Bending

RM SERIES

Cal-Chip Electronics, Incorporated

Thick FIlm Chip Resistors

PERFORMANCE CURVES

Power - Temperature Derating

Current Noise

Load Life in Moisture (1,000 hours)

High Frequency Characteristics

Resistance to Soldering Heat

Load Life (1,000 hours)

RM12 +10

RN12 +10

Note: RN is thin film

RM is thick film

RM SERIES