MMSZxxxT1G Series, SZMMSZxxxT1G Series Zener Voltage Regulators 500 mW SOD-123 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD-123 package. These devices provide a convenient alternative to the leadless 34-package style. http://onsemi.com Features 500 mW Rating on FR-4 or FR-5 Board Wide Zener Reverse Voltage Range - 2.4 V to 56 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class 3 (> 16 kV) per Human Body Model AEC-Q101 Qualified and PPAP Capable SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements Pb-Free Packages are Available* SOD-123 CASE 425 STYLE 1 1 Cathode 2 Anode MARKING DIAGRAM Mechanical Characteristics CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily Solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 1 xx M G G 260C for 10 Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 xx M G MAXIMUM RATINGS Rating Total Power Dissipation on FR-5 Board, (Note 1) @ TL = 75C Derated above 75C = Device Code = Date Code = Pb-Free Package (Note: Microdot may be in either location) Symbol PD Max Unit 500 6.7 mW mW/C ORDERING INFORMATION Device Package Shipping Thermal Resistance, Junction-to-Ambient (Note 2) RqJA 340 C/W MMSZxxxT1G SOD-123 (Pb-Free) 3,000 / Tape & Reel Thermal Resistance, Junction-to-Lead (Note 2) RqJL 150 C/W SZMMSZxxxT1G SOD-123 (Pb-Free) 3,000 / Tape & Reel TJ, Tstg -55 to +150 C MMSZxxxT3G SOD-123 (Pb-Free) 10,000 / Tape & Reel SZMMSZxxxT3G SOD-123 (Pb-Free) 10,000 / Tape & Reel Junction and Storage Temperature Range Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 3.5 X 1.5 inches. 2. Thermal Resistance measurement obtained via infrared Scan Method. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 2012 January, 2012 - Rev. 11 1 See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet. Publication Order Number: MMSZ2V4T1/D MMSZxxxT1G Series, SZMMSZxxxT1G Series ELECTRICAL CHARACTERISTICS (TA = 25C unless I otherwise noted, VF = 0.95 V Max. @ IF = 10 mA) Symbol IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR V IR VF IZT Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) VZ1 (Volts) (Notes 3 and 4) ZZT1 (Note 5) VZ2 (Volts) (Notes 3 and 4) @ IZT1 = 5 mA ZZT2 (Note 5) Max Reverse Leakage Current @ IZT2 = 1 mA IR @ VR Device Marking Min Nom Max W Min Max W mA Volts MMSZ2V4T1G T1 2.28 2.4 2.52 100 1.7 2.1 600 50 1 MMSZ2V7T1G T2 2.57 2.7 2.84 100 1.9 2.4 600 20 1 MMSZ3V0T1G T3 2.85 3.0 3.15 95 2.1 2.7 600 10 1 MMSZ3V3T1G T4 3.14 3.3 3.47 95 2.3 2.9 600 5 1 MMSZ3V6T1G T5 3.42 3.6 3.78 90 2.7 3.3 600 5 1 MMSZ3V9T1G U1 3.71 3.9 4.10 90 2.9 3.5 600 3 1 MMSZ4V3T1G U2 4.09 4.3 4.52 90 3.3 4.0 600 3 1 Device* MMSZ4V7T1G U3 4.47 4.7 4.94 80 3.7 4.7 500 3 2 MMSZ5V1T1G U4 4.85 5.1 5.36 60 4.2 5.3 480 2 2 MMSZ5V6T1G/T3G U5 5.32 5.6 5.88 40 4.8 6.0 400 1 2 MMSZ6V2T1G V1 5.89 6.2 6.51 10 5.6 6.6 150 3 4 MMSZ6V8T1G V2 6.46 6.8 7.14 15 6.3 7.2 80 2 4 MMSZ7V5T1G V3 7.13 7.5 7.88 15 6.9 7.9 80 1 5 MMSZ8V2T1G V4 7.79 8.2 8.61 15 7.6 8.7 80 0.7 5 MMSZ9V1T1G V5 8.65 9.1 9.56 15 8.4 9.6 100 0.5 6 MMSZ10T1G A1 9.50 10 10.50 20 9.3 10.6 150 0.2 7 MMSZ11T1G A2 10.45 11 11.55 20 10.2 11.6 150 0.1 8 MMSZ12T1G A3 11.40 12 12.60 25 11.2 12.7 150 0.1 8 MMSZ13T1G A4 12.35 13 13.65 30 12.3 14.0 170 0.1 8 MMSZ15T1G A5 14.25 15 15.75 30 13.7 15.5 200 0.05 10.5 MMSZ16T1G X1 15.20 16 16.80 40 15.2 17.0 200 0.05 11.2 MMSZ18T1G/T3G X2 17.10 18 18.90 45 16.7 19.0 225 0.05 12.6 MMSZ20T1G X3 19.00 20 21.00 55 18.7 21.1 225 0.05 14 MMSZ22T1G X4 20.90 22 23.10 55 20.7 23.2 250 0.05 15.4 MMSZ24T1G X5 22.80 24 25.20 70 22.7 25.5 250 0.05 16.8 3. The type numbers shown have a standard tolerance of 5% on the nominal Zener Voltage. 4. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms. 5. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz. *Include SZ-prefix devices where applicable. http://onsemi.com 2 MMSZxxxT1G Series, SZMMSZxxxT1G Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) VZ1 (Volts) (Notes 6 and 7) ZZT1 (Note 8) @ IZT1 = 2 mA VZ2 (Volts) (Notes 6 and 7) ZZT2 (Note 8) Max Reverse Leakage Current @ IZT2 = 0.1 mA @ IZT2 = 0.5 mA IR @ VR Device Marking Min Nom Max W Min Max W mA Volts MMSZ27T1G/T3G Y1 25.65 27 28.35 80 25 28.9 300 0.05 18.9 MMSZ30T1G Y2 28.50 30 31.50 80 27.8 32 300 0.05 21 MMSZ33T1G Y3 31.35 33 34.65 80 30.8 35 325 0.05 23.1 MMSZ36T1G Y4 34.20 36 37.80 90 33.8 38 350 0.05 25.2 MMSZ39T1G Y5 37.05 39 40.95 130 36.7 41 350 0.05 27.3 MMSZ43T1G Z1 40.85 43 45.15 150 39.7 46 375 0.05 30.1 MMSZ47T1G Z2 44.65 47 49.35 170 43.7 50 375 0.05 32.9 MMSZ51T1G Z3 48.45 51 53.55 180 47.6 54 400 0.05 35.7 MMSZ56T1G Z4 53.20 56 58.80 200 51.5 60 425 0.05 39.2 Device* 6. The type numbers shown have a standard tolerance of 5% on the nominal Zener Voltage. 7. Tolerance and Voltage Designation: Zener Voltage (VZ) is measured with the Zener Current applied for PW = 1 ms. 8. ZZT and ZZK are measured by dividing the AC voltage drop across the device by the AC current applied. The specified limits are for IZ(AC) = 0.1 IZ(DC), with the AC frequency = 1 kHz. *Include SZ-prefix devices where applicable. http://onsemi.com 3 MMSZxxxT1G Series, SZMMSZxxxT1G Series 8 7 VZ, TEMPERATURE COEFFICIENT (mV/C) VZ, TEMPERATURE COEFFICIENT (mV/C) TYPICAL CHARACTERISTICS TYPICAL TC VALUES FOR MMSZxxxT1G SERIES, SZMMSZxxxT1G SERIES 6 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 VZ @ IZT 10 10 100 VZ, NOMINAL ZENER VOLTAGE (V) VZ, NOMINAL ZENER VOLTAGE (V) Figure 1. Temperature Coefficients (Temperature Range - 55C to +150C) Figure 2. Temperature Coefficients (Temperature Range - 55C to +150C) Ppk , PEAK SURGE POWER (WATTS) 1000 1.0 PD versus TL 0.8 0.6 PD versus TA 0.4 0.2 0 25 50 75 100 125 RECTANGULAR WAVEFORM, TA = 25C 100 10 1 150 0.1 1 100 1000 PW, PULSE WIDTH (ms) Figure 3. Steady State Power Derating Figure 4. Maximum Nonrepetitive Surge Power 1000 75 V (MMSZ5267BT1G) 91 V (MMSZ5270BT1G) IF, FORWARD CURRENT (mA) TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IZ = 1 mA 100 5 mA 20 mA 10 100 10 150C 1 10 T, TEMPERATURE (C) 1000 Z ZT, DYNAMIC IMPEDANCE ( ) TYPICAL TC VALUES FOR MMSZxxxT1G SERIES, SZMMSZxxxT1G SERIES 1 12 1.2 0 100 1 10 100 1 0.4 0.5 75C 0.6 25C 0C 0.7 0.8 0.9 1.0 VZ, NOMINAL ZENER VOLTAGE VF, FORWARD VOLTAGE (V) Figure 5. Effect of Zener Voltage on Zener Impedance Figure 6. Typical Forward Voltage http://onsemi.com 4 1.1 1.2 MMSZxxxT1G Series, SZMMSZxxxT1G Series TYPICAL CHARACTERISTICS 1000 1000 0 V BIAS I R , LEAKAGE CURRENT ( A) TA = 25C C, CAPACITANCE (pF) 1 V BIAS 100 BIAS AT 50% OF VZ NOM 10 100 10 1 +150C 0.1 0.01 + 25C 0.001 - 55C 0.0001 1 1 100 10 0.00001 0 10 20 30 40 50 60 VZ, NOMINAL ZENER VOLTAGE (V) Figure 7. Typical Capacitance Figure 8. Typical Leakage Current TA = 25C I Z , ZENER CURRENT (mA) TA = 25C I Z , ZENER CURRENT (mA) 80 100 100 10 1 0.1 0.01 70 VZ, NOMINAL ZENER VOLTAGE (V) 0 2 4 6 8 10 12 10 1 0.1 0.01 10 30 50 70 90 VZ, ZENER VOLTAGE (V) VZ, ZENER VOLTAGE (V) Figure 9. Zener Voltage versus Zener Current (VZ Up to 12 V) Figure 10. Zener Voltage versus Zener Current (12 V to 91 V) http://onsemi.com 5 90 MMSZxxxT1G Series, SZMMSZxxxT1G Series PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE G D AAAA AAAA A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. A1 1 HE DIM A A1 b c D E HE L q E 2 MIN 0.037 0.000 0.020 --0.055 0.100 0.140 0.010 0 INCHES NOM 0.046 0.002 0.024 --0.063 0.106 0.145 ----- MAX 0.053 0.004 0.028 0.006 0.071 0.112 0.152 --10 STYLE 1: PIN 1. CATHODE 2. ANODE q L b MILLIMETERS MIN NOM MAX 0.94 1.17 1.35 0.00 0.05 0.10 0.51 0.61 0.71 ----0.15 1.60 1.40 1.80 2.54 2.69 2.84 3.56 3.68 3.86 ----0.25 --10 0 C SOLDERING FOOTPRINT* EE EE EE 0.91 0.036 2.36 0.093 4.19 0.165 EE EE EE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMSZ2V4T1/D