GENERAL DESCRIPTION
The Bosch Sensortec BHA250 shuttle board is a PCB with
the BHA250 Smart Sensor Hub mounted on it.
Additionally, it includes up to four external magnetometers, an
AKM09911, AKM09912, BMM150, and a YAS532 which can be
connected to the BHA250 using the available jumpers on the
PCB. All magnetic sensors are enabled by default (Jumper J15
can be used to switch off the power supply of individual sensors,
in case this is needed). Additional sensors can be attached to
the shuttle board, using the TFR-Card connector interface (J10)
provided on the board, next to the jumpers.
The shuttle board allows easy access to the sensors pins
via a simple socket. As all Bosch Sensortec sensor shuttle
boards have identical footprint, they can be plugged into Bosch
Sensortec’s advanced development tools (e.g. the Development
Board or Application Board).
Bosch Sensortec
BHA250
Shuttle Board
Note: Product photo may differ from real product’s appearance.
Shuttle board outline dimensions (all dimensions in mm)
Bosch Sensortec | BHA250
Data & Specification are preliminary and subject to change without notice | | Bosch Sensortec GmbH reserves all
rights in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third
parties. BOSCH and the symbols are registered trademarks of Robert Bosch GmbH, Germany.
2 | 3
Doc.-Number: BST-DHW-FL023-01 / Version_1.0_290615
BHA250 shuttle board schematic
BHA250 shuttle board layout placement
Bosch Sensortec | BHA250
Data & Specification are preliminary and subject to change without notice | | Bosch Sensortec GmbH reserves all
rights in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third
parties. BOSCH and the symbols are registered trademarks of Robert Bosch GmbH, Germany.
3 | 3
Doc.-Number: BST-DHW-FL031-01 / Version_1.0_290615
DELIVERABLES
BHA250 shuttle board
Pin
configuratio
n
Pin
Name
Description
1
VDD
Analog power supply
voltage (1.6 V ... 3.3 V)
2
VDDIO
Digital I/O power supply
voltage (1.6 V ... 3.3 V)
3
SDA
I2C serial data
(Host interface)
4
GND
Analog power supply
ground
5
SCK
I2C serial clock
(Host interface)
6
ASCK
I2C Master serial clock,
for connection of external
sensors
7
ASDA
I2C Master serial data,
for connection of external
sensors
8
INT
Host interrupt
TFR Card Extension Interface