1N5236B-A - DIODES Incorporated - Datasheet.Technology

DS18006 Rev. 17 - 3

1 of 3

www.diodes.com 1N5221B - 1N5267B

NOT RECOMMENDED FOR

NEW DESIGN, USE

MMSZ52xxB 1N5221B - 1N5267B

500mW EPITAXIAL ZENER DIODE

Features

• 500mW Power Dissipation

• High Stability

• Surface Mount Equivalents Available

• Hermetic Package

• V

Z - Tolerance ±5%

• Lead Free Finish, RoHS Compliant (Note 2)

Mechanical Data

• Case: DO-35

• Case Material: Glass

• Moisture Sensitivity: Level 1 per J-STD-020

• Leads: Solderable per MIL-STD-202, Method 208

• Terminals: Finish - Sn96.5Ag3.5. Solderable per

MIL-STD-202, Method 208

• Polarity: Cathode Band

• Marking: Type Number

• Weight: 0.13 grams (approximate)

DO-35

Dim Min Max

A 25.40 ⎯

B ⎯ 4.00

C ⎯ 0.60

D ⎯ 2.00

All Dimensions in mm

Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified

Characteristic Symbol Value Unit

Power Dissipation (Note 1) PD 500 mW

Thermal Resistance, Junction to Ambient Air (Note 1) R

JA 300 °C/W

Forward Voltage @ IF = 200mA VF 1.1 V

Operating and Storage Temperature Range TJ, TSTG -65 to +200 °C

Notes: 1. Valid provided that leads are kept at TL ≤75°C with lead length = 9.5mm (3/8”) from case; derate above 75°C.

2. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.

DS18006 Rev. 17 - 3

2 of 3

www.diodes.com 1N5221B - 1N5267B

NOT RECOMMENDED FOR

NEW DESIGN, USE

MMSZ52xxB

Electrical Characteristics @TA = 25°C unless otherwise specified Table 1

Type

Number

Zener Voltage Range

(Note 3) Test

Current Maximum Zener

Impedance Maximum Reverse

Current Maximum

Temperature

Coefficient

@ IZT

VZ @ IZT I

ZT Z

ZT @ IZT ZZK @ IZK =

0.25mA IR @VR

Nom (V) Min (V) Max (V) mA Ω Ω µA V %/°C

1N5221B 2.4 2.28 2.52 20 30 1200 100 1.0 -0.085

1N5222B 2.5 2.38 2.63 20 30 1250 100 1.0 -0.085

1N5223B 2.7 2.57 2.84 20 30 1300 75 1.0 -0.080

1N5224B 2.8 2.66 2.94 20 30 1400 75 1.0 -0.080

1N5225B 3.0 2.85 3.15 20 29 1600 50 1.0 -0.075

1N5226B 3.3 3.14 3.47 20 28 1600 25 1.0 -0.070

1N5227B 3.6 3.42 3.78 20 24 1700 15 1.0 -0.065

1N5228B 3.9 3.71 4.10 20 23 1900 10 1.0 -0.060

1N5229B 4.3 4.09 4.52 20 22 2000 5.0 1.0 +0.055

1N5230B 4.7 4.47 4.94 20 19 1900 5.0 2.0 +0.030

1N5231B 5.1 4.85 5.36 20 17 1600 5.0 2.0 +0.030

1N5232B 5.6 5.32 5.88 20 11 1600 5.0 3.0 +0.038

1N5233B 6.0 5.70 6.30 20 7.0 1600 5.0 3.5 +0.038

1N5234B 6.2 5.89 6.51 20 7.0 1000 5.0 4.0 +0.045

1N5235B 6.8 6.46 7.14 20 5.0 750 3.0 5.0 +0.050

1N5236B 7.5 7.13 7.88 20 6.0 500 3.0 6.0 +0.058

1N5237B 8.2 7.79 8.61 20 8.0 500 3.0 6.5 +0.062

1N5238B 8.7 8.27 9.14 20 8.0 600 3.0 6.5 +0.065

1N5239B 9.1 8.65 9.56 20 10 600 3.0 7.0 +0.068

1N5240B 10 9.50 10.50 20 17 600 3.0 8.0 +0.075

1N5241B 11 10.45 11.55 20 22 600 2.0 8.4 +0.076

1N5242B 12 11.40 12.60 20 30 600 1.0 9.1 +0.077

1N5243B 13 12.35 13.65 9.5 13 600 0.5 9.9 +0.079

1N5244B 14 13.30 14.70 9.0 15 600 0.1 10 +0.082

1N5245B 15 14.25 15.75 8.5 16 600 0.1 11 +0.082

1N5246B 16 15.20 16.80 7.8 17 600 0.1 12 +0.083

1N5247B 17 16.15 17.85 7.4 19 600 0.1 13 +0.084

1N5248B 18 17.10 18.90 7.0 21 600 0.1 14 +0.085

1N5249B 19 18.05 19.95 6.6 23 600 0.1 14 +0.086

1N5250B 20 19.00 21.00 6.2 25 600 0.1 15 +0.086

1N5251B 22 20.90 23.10 5.6 29 600 0.1 17 +0.087

1N5252B 24 22.80 25.20 5.2 33 600 0.1 18 +0.087

1N5253B 25 23.75 26.25 5.0 35 600 0.1 19 +0.089

1N5254B 27 25.65 28.35 4.6 41 600 0.1 21 +0.090

1N5255B 28 26.60 29.40 4.5 44 600 0.1 21 +0.091

1N5256B 30 28.50 31.50 4.2 49 600 0.1 23 +0.091

1N5257B 33 31.35 34.65 3.8 58 700 0.1 25 +0.092

1N5258B 36 34.20 37.80 3.4 70 700 0.1 27 +0.093

1N5259B 39 37.05 40.95 3.2 80 800 0.1 30 +0.094

1N5260B 43 40.85 45.15 3.0 93 900 0.1 33 +0.095

1N5261B 47 44.65 49.35 2.7 105 1000 0.1 36 +0.095

1N5262B 51 48.45 53.55 2.5 125 1100 0.1 39 +0.096

1N5263B 56 53.20 58.80 2.2 150 1300 0.1 43 +0.096

1N5264B 60 57.00 63.00 2.1 170 1400 0.1 46 +0.097

1N5265B 62 58.90 65.10 2.0 185 1400 0.1 47 +0.097

1N5266B 68 64.60 71.40 1.8 230 1600 0.1 52 +0.097

1N5267B 75 71.25 78.75 1.7 270 1700 0.1 56 +0.098

Notes: 3. Based on dc measurement at thermal equilibrium; lead length = 9.5mm (3/8”); thermal resistance of heat sink = 30°C/W.

DS18006 Rev. 17 - 3

3 of 3

www.diodes.com 1N5221B - 1N5267B

NOT RECOMMENDED FOR

NEW DESIGN, USE

MMSZ52xxB

Ordering Information (Notes 4 & 5)

Device Packaging Shipping

(Type Number)-A DO-35 5K/Ammo Pack

(Type Number)-T DO-35 10K/Tape & Reel

Notes: 4. Add "-A" or "-T" to the appropriate type number in Table 1. Example: 6.2V Zener = 1N5234B-A for ammo pack.

5. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf.

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings

noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express

written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y

use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.