P1 Relay
The Best Relaytion
ISO
9001
108-98009
Rev. C
EC-JM00-0009-03
ECOC: JM10
1. Aug. 04
1 pole telecom and signal relay, polarized,
Through Hole Type (THT) or
Surface Mount Technology (SMT),
Relay types: non-latching with 1 coil
latching with 2 coils
latching with 1 coil
Features
– Directly triggerable with TTL standard modules such
as ALS, HCT and ACT
– Slim line 13.5 x 7.85 mm, 0.531 x 0.309 inch
– Switching current 1 A
– 1 changeover contact (1 form C / SPDT)
– Bifurcated contacts
– Immersion cleanable
– High sensitivity results in low nominal power consumption
65 to 130 mW for non-latching
30 to 150 mW for latching
– Surge voltage resistance between contact and coil:
- 2.5 kV (2 / 10 µsec) meets the Bellcore Requirement GR-1089
- 1.5 kV (10 / 160 µsec) meets FCC Part 68
Typical applications
– Automotive equipment
CAN bus, imobilizer
– Office equipment
– Measurement and control equipment
– Medical equipment
– Safety equipment
Options
– FCC version on request. Testing of open contacts with surge
voltage in accordance with FCC 68.302 (1.5 kV, 10/160 µsec)
P1 Relay V23026
Basic insulation coil/contacts according to IEC/EN 60950
Clearance > 0.75 mm
Creepage distance > 0.75 mm
UL File No. E 111441
Page 2 (10) 108-98009 Rev. C
European Directive conformance:
P1 relay product conformance according to:
- Directive 2000/53/EC: ELV (End of Life of Vehicles)
- Directive 2002/95/EC: ROHS (Restrictions of the
use of certain hazardous substances in electrical and
electronic equipment)
Compliance is evidenced by written declaration from all raw
material suppliers.
Tyco Electronics AXICOM only has responsibility for the proper
processing of these materials.
Confirmation is valid for date codes ≥ 0429
Dimensions
V23026-x1xxx-B201
THT SMT
mm inch mm inch
L 13.0 ± 0.1 0.512 ± 0.004 13.4 ± 0.1 0.528 ± 0.004
W 7.6 ± 0.1 0.299 ± 0.004 7.75 ± 0.1 0.305 ± 0.004
H 6.9 - 0.2 0.272 - 0.008 8.0 - 0.2 0.315 - 0.008
T 3.5 - 0.2 0.138 -0.008 N/A N/A
T1 N/A N/A 10.9 - 0.5 0.429 - 0.020
T2 5.08 ± 0.15 0.200 ± 0.006 5.08 ± 0.15 0.200 ± 0.006
S 0.3 ± 0.1 0.012 ±0.004 N/A N/A
S1 N/A N/A 0.85 ± 0.1 0.033 ±0.004
S2 N/A N/A 0.2 - 0.15 0.008 ±0.006
P1 Relay V23026
Terminal assignment
Relay - top view
Mounting hole layout
View onto the component side of the PCB
Solder pad layout
View onto the component side of the PCB
Contact release or reset condition, coil polarity to set the relay
THT Version SMT Version
Latching type, 2 coils
reset condition
Non-latching type,
not energized condition
Latching type, 1 coil
reset condition
Page 3 (10) 108-98009 Rev. C
Contacts are shown in reset
condition. Both coils can be
used either as set or reset coil.
3 2.25 8.80 0.30 66 137 V23026A1006B201 1-1393774-7
5 3.75 14.50 0.50 68 370 V23026A1001B201 0-1393774-1
9 6.75 25.50 0.90 70 1165 V23026A1005B201 1-1393774-5
12 9.00 35.00 1.20 64 2250 V23026A1002B201 0-1393774-2
24 18.00 50.00 2.40 128 4500 V23026A1004B201 1-1393774-2
3 2.25 8.00 0.30 80 113 V23026D1026B201 0-1393776-8
5 3.75 13.30 0.50 80 313 V23026D1021B201 0-1393776-3
9 6.75 24.00 0.90 80 1015 V23026D1025B201 0-1422015-9
12 9.00 35.00 1.20 80 1800 V23026D1022B201 0-1393776-4
24 18.00 50.00 2.40 128 4500 V23026D1024B201 0-1393776-7
3 2.25 13.00 2.25 30 300 V23026C1056B201 2-1393774-6
5 3.75 20.00 3.75 34 740 V23026C1051B201 2-1393774-0
9 6.75 35.00 6.75 38 2160 V23026C1057B201 2-1393774-7
12 9.00 50.00 9.00 32 4500 V23026C1052B201 2-1393774-1
24 18.00 50.00 18.00 128 4500 V23026C1054B201 2-1393774-4
3 2.25 8.55 2.25 69 130 V23026B1106B201 0-1393775-3
5 3.75 14.75 3.75 64 390 V23026B1101B201 3-1393774-4
9 6.75 26.00 6.75 68 1200 V23026B1105B201 0-1393775-2
12 9.00 29.00 9.00 96 1500 V23026B1102B201 3-1393774-5
24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 W)
THT, non-latching, 1 coil
Further coil versions e.g. 1.5 V, 9 V and 15 V are available on request.
P1 Relay V23026
THT, latching, 2 coils (coils I and II are identical)
THT, latching, 1 coil
SMT, non-latching, 1 coil
3 2.25 8.55 2.25 69 130 V23026E1106B201 0-1393777-3
5 3.75 14.75 3.75 64 390 V23026E1101B201 0-1422015-6
9 6.75 26.00 6.75 68 1200 V23026E1105B201 0-1393777-2
12 9.00 29.00 9.00 96 1500 V23026E1102B201 0-1393776-9
24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (1500 W)
SMT, latching, 2 coils (coils I and II are identical)
5 3.75 20.00 3.75 34 740 V23026F1051B201 0-1422015-8
12 9.00 50.00 9.00 32 4500 V23026F1052B201 4-1393774-3
24A nominal voltage of 24 V is feasible with a 12 V coil with a series resistor (4500 W)
SMT, latching, 1coil
Page 4 (10) 108-98009 Rev. C
Coil Data (values at 23°C)
Nominal Operate/set voltage range Release/ Coil Coil Relay Tyco part
voltage reset voltage power Resistance code number
Unom Minimum
Minimum Maximum
voltage Umin voltage Umax
Vdc Vdc Vdc Vdc mW Ω / ± 10 %
Ordering Information
Coil operating range
Umax. at 0 A
Umax. at - 1 A
Unom. nominal coil voltage
Uop. min.
Urel. min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Umax. at 0 A
65 mW
130 mW
Uset min.
Ambient Temperature [°C]
Coil Voltage [U/Unom]
Unom. nominal coil voltage
Umax. - 100 % coil duty at 0 A
65 mW Latching
32 mW Latching
Umax. - 5 % coil duty at 1 A
Umax. - 5 % coil duty at 0 A
Max. DC load breaking capacity
P1 Relay V23026
Page 5 (10) 108-98009 Rev. C
Number of contacts and type
Contact assembly
Contact material
Limiting continuous current at max. ambient temperature
Maximum switching current
Maximum swichting voltage
Maximum switching capacity
Thermoelectric potential
Initial contact resistance / measuring condition: 10 mA / 20 mV
Electrical endurance at 12 V / 10 mA
at 6 V / 100 mA
at 30 V / 1000 mA
Mechanical endurance
UL/CSA ratings
1 changeover contact
Bifurcated contact
Palladium nickel, gold-rhodium covered
1 A
1 A
125 Vdc
150 Vac
30 W, 60 VA
< 100 mV
< 50 mW
typ. 5 x 107 operations
typ. 1 x 107 operations
typ. 1 x 104 operations
typ. 109 operations
30 Vdc / 1 A
65 Vdc / 0.46 A
150 Vac / 0.46 A
Contact Data
Unom = Nominal coil voltage
Umax. = Upper limit of the operative range of
the coil voltage (limiting voltage) when coils are
continously energized
Uop. min. = Lower limit of the operative range of
the coil voltage (reliable operate voltage)
Urel. min. = Lower limit of the operative range of
the coil voltage (reliable release voltage)
Insulation resistance at 500 VDC
Dielectric test voltage (1 min)
between coil and contacts (Relay with 1 coil)
between open contacts
Surge voltage resistance
according to Bellcore TR-NWT-001089 (2 / 10 ms)
between coil and contacts (Relay with 1 coil)
between open contacts
according to FCC 68 (10 / 160 ms)
between coil and contacts (Relay with 1 coil)
between open contacts
Insulation according to IEC / EN 60950
Clearance
Creepage distance
> 109 W
1500 Vrms
500 Vrms
2500 V
on request 2000 V
1500 V
on request 1500 V
Basic insulation
0.75 mm
0.75 mm
P1 Relay V23026
Capacitance
between coil and contacts
between open contacts
RF Characteristics
Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz
max. 6 pF
max. 5 pF
- 30.0 dB / - 18.0 dB
- 0.12 dB / - 1.9 dB
1.06 / 1.75
High Frequency Data
Insulation
Page 6 (10) 108-98009 Rev. C
General data
Operate time at Unom typ. / max.
Reset time (latching) at Unom , typ. / max.
Release time without diode in parallel (non-latching), typ. / max.
Release time with diode in parallel (non-latching), typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
Shock resistance, half sinus, 11 ms
Degree of protection / Environmental protection
Needle flame test
Mounting position
Processing information
Weight (mass)
Terminal surface
Resistance to soldering heat
1 ms / 2 ms
1 ms / 2 ms
0.4 ms / 1 ms
1.2 ms / 2 ms
1 ms / 3 ms
200 operations/s
-40° C ... +70° C, +85° C on request
< 130 K/W
85° C
20 G, 200 to 2000 Hz
40 G, 10 to 200 Hz
50 G (function)
immersion cleanable, IP 67 / RT III
application time 20 s, burning time < 15 s
any
Ultrasonic cleaning possible
max. 2 g
SnCu 0.7
260° C / 10 s
All data refers to 23° C unless otherwise specified.
P1 Relay V23026
Recommended soldering conditions
Soldering conditions according CECC 00802
Vapor Phase Soldering: Temperature/Time Profile
(Lead Temperature)
Infrared Soldering: Temperature/Time Profile
(Lead Temperature)
Full line: typical
Dotted line: process limits
10 sec
ca. 40 sec
max. 235° C
200° C
130° C
180° C
Time (s)
215° C
180° C
130° C
100° C
external preheating
20 - 40 sec Full line: typical
Dotted line: process limits
forced
cooling
Time (s)
Temperature °C
Temperature °C
Note: Internal relay termperature should not exceed 210° C
Page 7 (10) 108-98009 Rev. C
P1 Relay V23026
Tube for THT version - 40 relays per tube, 2000 relays per box
Tape and reel for SMT version - 480 relays per reel, 2400 per box
Reel dimension
Packing Dimensions in mm
Page 8 (10) 108-98009 Rev. C
P1 Relay V23026
IM Relays
4th generation slim line – low profile polarized 2 c/o telecom relay with
bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption
of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay
is available as through hole and surface mount type (J-Legs and Gull
Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is
CECC/IECQ approved and certified in accordance with IEC/EN 60950
and UL1950. Dimensions approx. 10 x 6 mm board space and
5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 24 V, coil power consumption 140 mW,
latching relays with 1 coil 70 mW. The P2 Relay is available as through
hole or surface mount type and capable to switch currents up to 5
A. Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FX Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW. The FX2 relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV
– 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The FX2 is CECC/
IECQ approved and certified in accordance with IEC/EN 60950 and
UL1950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm
height.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as
through hole and surface mount type. Dielectric strength fulfills the
Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ approved
and certified in accordance with IEC/EN 60950 and UL1950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW
for the high sensitive version, 140... 300 mW for the standard version,
latching relays with 1 coil 100 mW.. The FP2 Relay is available as
through hole type and capable to switch loads up to
30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /
160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.
14 x 9 mm board space and 5 mm height.
MT2 / MT4
2nd generation non polarized, non latching 2 c/o and 4 c/o telecom and
signal relay with bifurcated contacts. Nominal voltage range from 4.5 ...
48 V, coil power consumption 150/200/300/400 and
550 mW, and 300 mW (MT4). Dielectric strength fulfills the
requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both
and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)
the MT4 only.
Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,
MT4 approx. 20 x15 mm board space and 11 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various
other applications. Nominal voltage range from 3 ... 48 V, coil power
consumption from 150 .... 500 mW. The D2n relay is capable to
switch currents up to 3 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
20 x10 mm board space and 11,5 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for
a wide range of applications, available as non latching or latching relay
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay
is available as through hole or surface mount type and capable to
switch currents up to 1 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for
SMT version.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW,
sensitive versions 200 mW. The W11 relay is capable to switch
currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.
15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal
voltage range from 5 ... 24 V, coil power consumption 50...280 mW
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays
are available in DIP or SIL housing and capable to switch currents up to
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm
height for SIL version.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various
signal switching applications. Available as non polarized, polarized
/ latching and relay with AC coil. The benefit is the possibility of
combining various contact sets from 1 up to 6 poles, single and
bifurcated contacts, different contact materials with a coil voltage
range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust
protected and hermetically sealed versions, with plug in or solder
terminals and are capable to switch currents up to 5 A. Forcibly
guided (linked) contact sets optional. Dielectric strength 500 Vrms.
Dimensions from approx. 19 x 24 to 19x35 mm board space and
30 mm height.
Other Relays
We offer a variety of different relay families for maintenance and
replacement purposes. These relays are up to 60 years old now, such
as Card Relay SN (V23030 / V23031 series), Small General Purpose
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067
and V23163 ... V23167 series). Accessories like sockets, hold down
springs, etc. optional.
HF3 Relay
High performance low cost RF relay with excellent RF characteristics.
Available with an impedance of 50 and 75 Ohm. Suitable for frequen-
cies up to 3 GHz. Actually smallest RF relay available combining small
size, excellent RF performance and SMD solderability. Available as non
latching or latching relay with 1 or 2 coils and a nominal coil voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. Dimensions 14.6 x 7.3 x 10 mm.
Page 9 (10) 108-98009 Rev. C
Tyco Electronics AXICOM Ltd.
Seestrasse 295 - P.O. Box 220
CH-8804 Au-Wädenswil / Switzerland
Phone +41 1 782 9111
Fax +41 1 782 9080
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +001 800-522-6752
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Page 10 (10) 108-98009 Rev. C
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
