
http://www.epsontoyocom.co.jp
Crystal oscillator Epson Toyocom
Specifications (characteristics)
106.250 MHz to
170.000 MHz
Please contact us for inquiries regarding available
frequencies.
P: 0 C to +70 C
R: -5 C to +85 C
G: 50 10-6
H: 100 10-6
Z: 50 10-6
Y,H: 100 10-6
OE=Vcc, No load condition
50 % VCC level, L_CMOS Max.
Output load condition (CMOS)
Between 20% VCC and80% VCC level, L_CMOS Max.
Time at minimum supply voltage to be 0 s
(RMS of total distribution)
Accumulated Jitter() n=2 to 50000 cycles
Offset frequency: 12 kHz to 20 MHz
+25 C, First year, VCC=2.5 V,3.3 V
*1 As per below table
*2 Based on DTS-2075 Digital timing system made from WAVECREST with jitter analysis software VISI6.
*3 Except: CHPA,CHRA,PCH
Frequency tolerance and
operating temperature
HP: 10010-6 (0C to +70C)
Frequency tolerance and
operating temperature
H: 10010-6 (0C to +70C) *4
HR: 10010-6 (-5C to +85C)
Y: 10010-6 (0C to +70C) *5
GP: 5010-6 (0C to +70C)
Z: 5010-6 (0C to +70C) *6
GR: 5010-6 (-5C to +85C)
*4 This includes initial frequency tolerance, temperature variation, supply voltage variation, load variation, reflow drift, and aging(+25 C,10 years).
*5 This includes initial frequency tolerance, temperature variation, supply voltage variation, load variation, and reflow drift.(except aging)
*6 This includes initial frequency tolerance, and temperature variation.(except reflow drift, supply voltage variation, load variation and aging)
External dimensions (Unit:mm)
Footprint (Recommended) (Unit:mm)
CRYSTAL OSCILLATOR
LOW-JITTER SAW OSCILLATOR
EG - 2021 / 2001CA
Frequency range : 62.5 MHz to 250 MHz
Supply voltage : 2.5 V EG-2021CA
3.3 V EG-2001CA
Output : CMOS
Function : Output enable (OE)
External dimensions : 7.0 × 5.0 × 1.2 mm
Very low jitter and low phase noise by SAW unit.
*1 Standby function built-in
*1 Standby function built-in
#2 is connected to the cover.
#2 is connected to the cover.
Product Number (please contact us)
EG-2021CA: Q3807CA00xxxx00
EG-2001CA: Q3801CA00xxxx00
OE pin = HIGH : Specified frequency output.
OE pin = LOW : Output is high impedance