Product data sheet

Asym. Flashing Timing Relay - 0.05s…300h -

24…240V AC/DC - 1C/O

Range of product Zelio Time

Product or component type Modular timing relay

Discrete output type Relay

Time delay range 0.05...1 s

30...300 min

30...300 h

30...300 s

3...30 h

0.3...3 s

3...30 min

3...30 s

Release input voltage <= 2.4 V

Voltage range 0.85...1.1 Us

Supply frequency 50...60 Hz +/- 5 %

Connections - terminals Screw terminals, 1 x 0.5...1 x 3.3 mm² (AWG 20...AWG 12) solid without cable end

Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 14) flexible with cable end

Setting accuracy of time delay +/- 10 % of full scale at 25 °C conforming to IEC 61812-1

Control signal pulse width 100ms with load in parallel

Insulation resistance 100 MOhm at 500V DC conforming to IEC 60664-1

Recovery time 120ms on de-energisation

Immunity to microbreaks 10ms

Power consumption in VA 3VA at 240 V AC

Power consumption in W 1.5W at 240 V DC

Switching capacity in VA 2000VA

Minimum switching current 10mA at 5 V DC

Power on delay 100ms

Creepage distance 4 kV/3 conforming to IEC 60664-1

Overvoltage category III conforming to IEC 60664-1

Safety reliability data MTTFd = 194 years

B10d = 180000

Mounting position Any position

Mounting support 35 mm DIN rail conforming to EN/IEC 60715

Status LED LED backlight green (steady) for dial pointer indication

LED yellow (steady) for output relay energised

LED yellow (fast flashing) for timing in progress and output relay de-energised

Standards IEC 61812-1

UL 508

Directives 2004/108/EC - electromagnetic compatibility

2006/95/EC - low voltage directive

Product certifications EAC

China RoHS

IP20 terminals: conforming to IEC 60529

Pollution degree 3 conforming to IEC 60664-1

Vibration resistance 20 m/s² (f= 10…150Hz) conforming to IEC 60068-2-6

Shock resistance 15 gn not operating for 11ms conforming to IEC 60068-2-27

5 gn in operation for 11ms conforming to IEC 60068-2-27

Relative humidity 95% at 25…55°C

Electromagnetic compatibility Fast transients immunity test - test level: 1 kV level 3 (capacitive connecting clip) conforming to IEC

Surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5

Fast transient bursts - test level: 2 kV level 3 (direct contact) conforming to IEC 61000-4-4

Immunity to microbreaks and voltage drops - test level: 30 % (500 ms) conforming to IEC 61000-4-11

Immunity to microbreaks and voltage drops - test level: 100 % (20 ms) conforming to IEC 61000-4-11

Packing Units

Package 1 Weight 0.090kg

Offer Sustainability

Sustainable offer status Green Premium product

REACh Regulation REACh Declaration

EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)

EU RoHS Declaration

Product data sheet

Dimensions Drawings

Product data sheet

Connections and Schema

Product data sheet

Technical Description

On energisation of power supply, output(s) R starts at its/their initial state for timing duration Tr then change(s) to output(s) R close(s) for the

another timing duration Ta.This cycle is repeated indefintely until power supply removal.

Function: 1 Output

Product data sheet

Technical Description

On energisation of power supply, output(s) R starts at output(s) R close(s) for timing duration Ta then change(s) to its/their initial state for timing

duration Tr.This cycle is repeated indefintely until power supply removal.Specially for RE22R1MLMR, this Li function can only be initiated by

energizing X2 permanently.

Function: 1 Output with Function Selection

Function: 1 Output

Product data sheet

Technical Description

On energisation of power supply, output(s) R starts at its/their initial state for timing duration Tr and the timing can be interrupted / paused each

time X1 energizes.When the cumulative total of time periods elapsed reaches the pre-set value Tr, then changes to output(s) R close(s).The

output(s) R close state will remain for the same timing duration Ta and the timing can be interrupted / paused each time X1 energizes. When

the cumulative total of time periods elapsed reaches the pre-set value Ta, the output(s) R revert(s) to its/their initial state.This cycle is repeated

indefinitely until power supply removal.

Function: 1 Output

Product data sheet

Technical Description

On energisation of power supply, output(s) R starts at output(s) R close(s) for timing duration Ta and the timing can be interrupted / paused each

time X1 energizes.When the cumulative total of time periods elapsed reaches the pre-set value Ta, the output(s) R revert(s) to its/their initial

state.The output(s) R at intial state will remain for timing duration Tr the timing can be interrupted / paused each time X1 energizes. When the

cumulative total of time periods elapsed reaches the pre-set value Tr, then changes to output(s) R close(s) This cycle is repeated indefintely until

power supply removal.Specially for RE22R1MLMR, this Li function can only be initiated by energizing X2 permanently

Function: 1 Output with Function Selection

Relay energised

Output open

Output closed