Bulk Metal® Foil Technology
RNC90Y and RNC90Z (Z-Foil) to MIL-PRF-55182/9
Military and Space Established Reliability
Vishay Foil Resistors
Document Number: 63007 For any questions, contact: foil@vishaypg.com www.foilresistors.com
Revision: 23-Mar-10 1
INTRODUCTION
Vishay Military Established Reliability resistors are available
in resistance values from 4.99 Ω through 121 kΩ and for
tolerances from ± 0.005 % to ± 1.0 %. The same resistors are
also available as a non-qualified product for customers
desiring higher or lower resistance values and the same or
better performance capabilities. (See table 2) Both the
qualified and the non-qualified version are manufactured on
the same production line facilities and are subjected to the
same process, lot control, conditioning, and GRP A (100 %)
screening. Qualified versions receive additional MIL Group B
and C testing.
FEATURES
•
QPL product with established reliability (ER): meets
requirements of MIL-PRF-55182/9
•
Load life stability: ± 0.005 % for 2000 h, 0.3 W at + 125 °C
•
Temperature coefficient of resistance (TCR): ± 2 ppm/°C max.
(- 55 °C to + 175 °C)
•
Resistance tolerance: to ± 0.005 %
•
Thermal EMF: < 0.1 µV/°C
•
Qualified resistance range: 4.99
Ω
to 121 k
Ω
(RNC90Y)
30.1
Ω
to 121 k
Ω
(RNC90Z)
•
Specially conditioned non-QPL resistors available
See data sheet “Improved Performance Tested”
•
Fast thermal stabilization
•
Rise time: 1 ns without ringing
•
Special coatings that provide a cushioning layer which isolates
the resistive element from external stresses and moisture
•
Electrostatic discharge (ESD) above 25 000 V
•
Non inductive, non capacitive design
•
Current noise < - 42 dB
•
Prototype sample available from 72 h
Notes
1. Qualification and failure rate verification test data is maintained by Vishay Foil and is available upon request. Lot traceability and identification
data is maintained by Vishay Foil for 7 years.
2. Load life ΔR Maximum can be reduced by 80 % through Enhanced Reliability Testing (ERT). Consult Vishay Applications Engineering for
details.
3. Inductance (L) due mainly to the leads.
4. Not to exceed power rating of resistor.
5. µV/°C relates to EMF due to lead temperature differences and µV/W due to power applied to the resistor.
6. 0.200" (5.08 mm) lead spacing available - specify RNC90T for RNC90Y, and RNC90S for RNC90Z.
TABLE 1 - SPECIFICATIONS COMPARISON
SPECIFICATION
RNC90Y (QUALIFIED)
MIL-PRF-55182/9
CHARACTERISTIC Y LIMITS
RNC90Z (QUALIFIED)
MIL-PRF-55182/9
CHARACTERISTIC Z LIMITS
S555 (NON-QUALIFIED)
VISHAY PERFORMANCE
LIMITS
Z555 (NON-QUALIFIED)
VISHAY PERFORMANCE
LIMITS
Temperature
Coefficient of
Resistance
± 5 ppm/°C ± 2 ppm/°C ± 5 ppm/°C ± 3 ppm/°C ± 2.5 ppm/°C ± 2 ppm/°C
(- 55 °C to + 125 °C) (- 55 °C to + 175 °C) (- 55 °C to + 125 °C)
± 10 ppm/°C (- 55 °C to + 125 °C)
(+ 125 °C to + 175 °C)
Resistance Range
4.99
Ω
to 121 k
Ω
30.1
Ω
to 121 k
Ω
1
Ω
to 150 k
Ω
4.99
Ω
to
25
Ω
> 25
Ω
to
80
Ω
> 80
Ω
Failure Rate
Level R Level R Not specified Not specified
Load-Life Stability
0.3 W at + 125 °C
at 2000 h ± 0.05 % maximum
Δ
R ± 0.05 % maximum
Δ
R ± 0.015 % maximum
Δ
R
2)
± 0.015 % maximum
Δ
R
2)
at 10 000 h ± 0.5 % maximum
Δ
R ± 0.5 % maximum
Δ
R ± 0.05 % maximum
Δ
R
2)
± 0.05 % maximum
Δ
R
2)
Current Noise
Not specified Not specified - 40 dB minimum - 40 dB minimum
High-Frequency
Operation
Rise Time Not specified Not specified 1.0 ns at 1 k
Ω
1.0 ns at 1 k
Ω
Inductance
3)
(L) Not specified Not specified 0.1 µH maximum 0.1 µH maximum
0.08 µH typical 0.08 µH typical
Capacitance (C) Not specified Not specified 1.0 pF maximum 1.0 pF maximum
0.5 pF typical 0.5 pF typical
Voltage Coefficient
0.0005 %/V 0.0005 %/V 0.0001 %/V 0.0001 %/V
Working Voltage
4)
300 V maximum 300 V maximum 300 V maximum 300 V maximum
Thermal EMF
5)
Not specified Not specified 0.1 µV/°C maximum 0.1 µV/°C maximum
1 µV/W maximum 1 µV/W maximum
Military and Space Established Reliability
Vishay Foil Resistors
www.foilresistors.com For any questions, contact: foil@vishaypg.com Document Number: 63007
2Revision: 23-Mar-10
FIGURE 1 - COMPARISON OF RNC90Y TO RNC90Z TEMPERATURE COEFFICIENT OF RESISTANCE
+ 160
0
- 160
+ 100
0
- 1000
ΔR/R (ppm)
Temperature (°C)
Specification ± 2 ppm/°C
- 200
+ 300
- 1000
RNC90Z
+ 1000
- 55 25 125 175
- 300
+ 200
+ 400
0
- 400
+ 1000
- 1000
ΔR/R (ppm)
Temperature (°C)
Specification ± 5 ppm/°C
- 500
+ 500
± 10 ppm/°C
- 1000
RNC90Y
+ 1000
- 55 25 125 175
FIGURE 2 - TRIMMING TO VALUES
(Conceptual Illustration)
Mutual Inductance
Reduction due
to Change in
Current Direction
Current Path
Before Trimming
Note: Foil shown in black, etched spaces in white
Interloop Capacitance
Reduction in Series
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Current Path
After Trimming
FIGURE 3 - POWER DERATING CURVE
200
150
100
50
0- 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175
Ambient Temperature °C
Percent of Rated Power
+ 70 °C
Rated Power
FIGURE 4 - IMPRINTING AND DIMENSIONS
Note
1. 0.200" (5.08 mm) lead spacing available - specify RNC90T for RNC90Y, and RNC90S for RNC90Z
RNC90Y and RNC90Z Military Approved Resistors
W
Lead Material
#22 AWG
(0.025 Dia.)
Solder Coated
Copper
Side View
Resistance
Value Code
XXXXX
100R01
B R
LL
SW
Model Number
Failure Rate Code
(Not Present If
Non-Qualified)
Resistance
Tolerance
Code
Rear View
LS1)
Jan Designator
(Non Present If
Non-Qualified)
VISHAY
18612
XXXXX J
ST
H
L
Manufacturers
Identification
Number
Mfr. Code
B
Factory
07
Year
11
Week
Front View
Military and Space Established Reliability
Vishay Foil Resistors
Document Number: 63007 For any questions, contact: foil@vishaypg.com www.foilresistors.com
Revision: 23-Mar-10 3
Note
• S555 and Z555 units are manufactured on the same production line facilities and are subjected to all the same process and lot control
requirements imposed on RNC90Y (Z) version, as well as all of the special screening, environmental conditioning and documentation
stipulations outlined in MIL-PRF 55182/9
Note
* For non-standard requests, please contact application engineering.
TABLE 2 - MODEL SELECTION
MODEL
NUMBER
RESISTANCE
RANGE
(
Ω
)
STANDARD RESISTANCE
TOLERANCE FAILURE
RATE
AMBIENT
POWER RATING AVERAGE
WEIGHT
(g)
DIMENSIONS
TIGHTEST
%
LOOSEST
%at + 70 °C at + 125 ° C INCHES mm
RNC90Y
30.1 to 121K ± 0.005 ± 1.0 M, P, R
(See
Table 3)
0.6 W 0.3 W 0.6
W: 0.105 ± 0.010
L: 0.300 ± 0.010
H: 0.326 ± 0.010
ST: 0.015 ± 0.005
SW: 0.040 ± 0.005
LL: 1.000 ± 0.125
LS: 0.150 ± 0.005
2.67 ± 0.25
7.62 ± 0.25
8.28 ± 0.25
0.38 ± 0.13
1.02 ± 0.13
25.4 ± 3.18
3.81 ± 0.13
16.2 to 30.0 ± 0.05 ± 1.0
4.99 to 16.0 ± 0.1 ± 1.0
RNC90Z 30.1 to 121K ± 0.005 ± 1.0 0.6 W 0.3 W 0.6
S555
(NON QPL)
30.1 to 121K ± 0.005 ± 1.0
- 0.6 W 0.3 W 0.6
20 to < 30.1 ± 0.01 ± 1.0
5 to < 20 ± 0.05 ± 1.0
2 to < 5 ± 0.1 ± 1.0
1 to < 2 ± 0.5 ± 1.0
> 121K to 150K ± 0.005 ± 1.0 - 0.4 W 0.2 W 0.6
Z555
(NON QPL)
30.1 to 121K ± 0.005 ± 1.0
- 0.6 W 0.3 W 0.620 to < 30.1 ± 0.01 ± 1.0
4.99 to < 20R ± 0.05 ± 1.0
TABLE 3 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y1189100R500AR0L (preferred part number format)
DENOTES PRECISION VALUE LIFE FAILURE RATE (LFR) AER*
YR = Ω
K = kΩ
R = ± 0.01 %
P = ± 0.1 %
M = ± 1.0 %
0 = standard
1 - 999 = custom
PRODUCT CODE RESISTANCE TOLERANCE PACKAGING
1189 = RNC90Z
0089 = RNC90Y
1508 = RNC90T
1506 = RNC90S
0088 = S555
1288 = Z555
V = ± 0.005 %
T = ± 0.01 %
A = ± 0.05 %
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
L= bulk pack
R= tape and reel
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1189 100R500 A R 0 L:
TYPE: RNC90Z
VALUE: 100.5 Ω
ABSOLUTE TOLERANCE: ± 0.05 %
LIFE FAILURE RATE (LFR): ± 0.01 %
AER: standard
PACKAGING: bulk pack
HISTORICAL PART NUMBER: RNC90Z 100R50 A R B (will continue to be used)
RNC90Z 100R50 A R B
MODEL OHMIC VALUE RESISTANCE
TOLERANCE
LIFE FAILURE
RATE (LFR) PA C K AG I N G
RNC90Z
RNC90S
RNC90Y
RNC90T
S555
Z555
100.5 ΩV = ± 0.005 %
T = ± 0.01 %
A = ± 0.05 %
B = ± 0.1 %
D = ± 0.5 %
F = ± 1.0 %
R = ± 0.01 %
P = ± 0.1 %
M = ± 1.0 %
B = bulk pack
1891 0R50Y1 AR0 00 L
Military and Space Established Reliability
Vishay Foil Resistors
www.foilresistors.com For any questions, contact: foil@vishaypg.com Document Number: 63007
4Revision: 23-Mar-10
The response of military and non military grade resistors to environmental stresses can be made better by “Improved
Performance Testing” (IPT). The IPT part will see burn-in and cycling that removes the “knee” from the normal drift of non IPT
parts. (See Table 4 for the improvement to expect in military parts when calling for Vishay recommended screening). Users
should be aware that IPT testing renders the part non QPL and so a 3XXXXX part number will be assigned by Vishay. Consult
Applications Engineering for details and ordering advice.
CAGE #18612
“Commercial and Government Entity”
Formerly “FSCM”
TABLE 4 - IMPROVED PERFORMANCE TESTING (NON-QPL APPROVED) VS. QPL
TEST
GROUP TEST
RNC90Y
MIL-PRF-55182/9
VISHAY
IMPROVED PERFORMANCE
TESTING
(IPT) LIMITS
METHOD PARAGRAPH LIMITS
I Power Conditioning not done - ± 0.0025 %
Thermal Shock and 4.8.2 - ± 0.0025 %
Overload Combined 4.8.3 ± 0.05 % ± 0.0025 %
II Resistance Temperature
Characteristic
4.8.9 ± 5 ppm/°C < ± 2 ppm/°C
(- 55 °C to + 125 °C)
(Can be sorted for tighter tracking)
Low Temperature Storage 4.8.23 ± 0.05 % ± 0.0025 %
Low Temperature Operation 4.8.10 ± 0.05 % ± 0.0025 %
Terminal Strength 4.8.11 ± 0.02 % ± 0.001 %
III DWV 4.8.12 ± 0.02 % ± 0.001 %
Insulation Resistance 4.8.13 104 MΩ> 104 MΩ
Resistance to Soldering Heat 4.8.14 ± 0.02 % ± 0.001 %
Moisture Resistance 4.8.15 ± 0.05 % ± 0.015 %
IV Shock 4.8.16 ± 0.01 % ± 0.0025 %
Vibration 4.8.17 ± 0.02 % ± 0.0025 %
V Load Life at + 125 °C; 2000 h 4.8.18 ± 0.05 % ± 0.005 % (50 ppm)
Load Life at + 125 °C; 10 000 h 4.8.18 ± 0.5 % ± 0.015 % (150 ppm)
V (a) + 85 °C Power Rating - - ± 0.005 % (50 ppm)
+ 70 °C Power Rating 4.8.18 ± 0.05 % ± 0.005 % (50 ppm)
V (b) + 25 °C Power Rating - - ± 0.005 % (50 ppm)
VI Storage Life - - ± 0.0025 %
VII High Temperature Exposure 4.8.19 ± 0.5 % ± 0.005 %
VIII Max. Allowance Reactance - - < 1 %
Current Noise - - < - 42 dB
Voltage Coefficient 4.8.20 0.0005 %/V < 0.00001 %/V
- (5 ppm/V) (< 0.1 ppm/V)
Thermal EMF - - 0.1 µV/°C
FIGURE 5 - IPT IMPRINTING AND DIMENSIONS in inches (millimeters)
0.150 ± 0.005
(3.81 ± 0.13)
VISHAY
XXXX
3XXXXX
0.015 ± 0.005
(0.381 ± 0.13)
0.326 ± 0.010
(8.28 ± 0.25)
0.300 ± 0.010
(7.62 ± 0.25) 0.105 ± 0.010
(2.67 ± 0.25)
Lead Material
#22 AWG
(0.025 Dia.)
Solder Coated
Copper
Resistance
Value Code
XXXXXX
100R01
0.01 %
1.00 ± 0.125
(25.4 ± 3.18)
Model Number
Date Code
10
Week
Optional
Customer P/N
6 Digits Maximum
Tolerance
0.040 ± 0.005
(1.02 ± 0.13)
01
Year
Rear ViewSide ViewFront View
Document Number: 63999 www.vishaypg.com
Revision: 22-Feb-10 1
Disclaimer
Legal Disclaimer Notice
Vishay Precision Group
1
All product specifications and data are subject to change without notice.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or incompleteness
contained herein or in any other disclosure relating to any product.
Vishay Precision Group disclaims any and all liability arising out of the use or application of any product described
herein or of any information provided herein to the maximum extent permitted by law. The product specifications do
not expand or otherwise modify Vishay Precision Group’s terms and conditions of purchase, including but not limited
to the warranty expressed therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay Precision Group.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated
for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for
any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group
personnel to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Vishay Precision Group
Document No.: 63999
Revision: 27-Apr-2011
www.vishaypg.com
1
Legal Disclaimer Notice
Disclaimer
Legal Disclaimer Notice
Disclaimer
Document No.: 63999
Revision: 27-Apr-2011
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and
conditions of purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision
Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and
all liability, including without limitation special, consequential or incidental damages, and (iii) any and
all implied warranties, including warranties of fitness for particular purpose, non-infringement and
merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different
applications and performance may vary over time. Statements regarding the suitability of products for
certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that
are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular
application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or
by any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly
indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay
Precision Group for any damages arising or resulting from such use or sale. Please contact authorized
Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for
such applications.
Product names and markings noted herein may be trademarks of their respective owners.
