THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM PRODUCT DATA SHEET
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
The Connor-Winfield models
HSM546, HSM516, HSM526 and
HSM536 are 5.0V HCMOS,
Surface Mount, Fixed Frequency
Crystal Oscillators (XO) designed
for use in all applications requiring
precision clocks over the 0 to 70°C,
Commercial Temperature Range.
The surface mount package is
designed for high-density mounting
and is optimum for mass
production.
1 2
HSM536 - 50 MHz
CLOCK
SERIES CENTER
FREQUENCY
1.8 to 80 MHz
5.0V OPERATION
TRI-STATE ENABLE / DISABLE FUNCTION
OVERALL FREQUENCY TOLERANCE:
HSM546 ±20ppm
HSM516 ±25ppm
HSM526 ±50ppm
HSM536 ±100ppm
TEMPERATURE RANGE: 0 to 70°C
CERAMIC SURFACE MOUNT PACKAGE
TAPE AND REEL PACKAGING
RoHS COMPLIANT / Pb FREE
5.0V SURFACE MOUNT 11x6.35mm
HCMOS CLOCK OSCILLATOR
Sm003 12 08/24/05
ORDERING INFORMATION
FEATURES
DESCRIPTION
HSM546, HSM516
HSM526, HSM536
Dimensional Tolerance: ±.02” (.508mm)
±.005” (.127mm)
PAD CONNECTION
1 ENABLE/DISABLE
2 GROUND
3 OUTPUT
4 Vcc
.252
(6.35mm)
.433
(11.05mm)
.200
(5.08mm)
.104
(2.67mm)
.098
(2.54mm)
.043
(1.14mm)
Typical
4 Places
ABSOLUTE MAXIMUM RATINGS TABLE 1.0
PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE
Storage Temperature -55 - 125 °C
Supply Voltage (Vcc) -0.5 - 7.0 Vdc
MODEL SPECIFICATIONS: TABLE 2.0
MODEL HSM546
Frequency Range (Fo) 1.8 - 80 MHz
Frequency Tolerance: -20 - 20 ppm 1
MODEL HSM516
Frequency Range (Fo) 1.8 - 80 MHz
Frequency Tolerance: -25 - 25 ppm 1
MODEL HSM526
Frequency Range (Fo) 1.8 - 80 MHz
Frequency Tolerance: -50 - 50 ppm 1
MODEL HSM536
Frequency Range (Fo) 1.8 - 80 MHz
Frequency Tolerance: -100 - 100 ppm 1
OPERATING SPECIFICATIONS TABLE 3.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Operating Temperature Range 0 - 70 °C
Supply Voltage (Vdd) 4.5 5.0 5.5 Vdc
Supply Current 1.8 to 19.999 MHz (Icc) - - 20 mA
20 to 49.999 MHz (Icc) - - 30 mA
50 to 69.999 MHz (Icc) - - 50 mA
70 to 80.0 MHz (Icc) - - 80 mA
INPUT CHARACTERISTICS TABLE 4.0
Enable Voltage (Vih) 2.2 - - Vdc 2
Disable Voltage (Vil) - - .08 Vdc
Enable Time - - 100 nS
Disable Time - - 100 nS
HCMOS OUTPUT CHARACTERISTICS TABLE 5.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
LOAD - - 50 pF
Voltage (High) (Voh) 4.50 - - Vdc
(Low) (Vol) - - 0.50 Vdc
Current (High) (Ioh) -16 - - mA
(Low) (Ioh) - - 16 mA
Duty Cycle at 50% of Vcc 45 50 55 %
Rise / Fall Time 10% to 90% - - 5 nS
Start-Up Time - - 10 mS
Jitter (BW=10Hz to 20MHz) - - 5 ps rms
Jitter (BW=12kHz to 20MHz) - - 1 ps rms
Note:
1) Inclusive of calibration @ 25°C, frequency vs. temperature stability, supply voltage
change, load change, shock and vibration, 10 years aging.
2) Oscillator output is enabled with no connection on pad 1
PACKAGE CHARACTERISTICS TABLE 6.0
Package Hermetically sealed ceramic package and metal cover
HSM536
50 MHz
CW H5
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM PRODUCT DATA SHEET
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
2 2
Sm003 12 08/24/05
1.00
(25.4mm)
0.08
(2.0mm) 0.08
(2.0mm)
10.00
(254.0mm)
3.15
(80mm)
0.47
(11.9mm)
0.27
(6.8mm)
0.45
(11.4mm) 0.157
(4.0mm)
1.00 Dia.
(25.4mm Dia.)
0.08
(2.0mm)
8.45 Dia.
(215mm Dia.)
0.06 Dia.
(1.5mm Dia.)
0.295 (7.5mm)
0.07 (1.75mm)
0.63 (16.0mm)
1000 PCS / REEL
0.200
(5.08mm)
0.475
(12.06mm)
0.138
(3.50mm)
0.135
(3.43mm)
0.065
(1.65mm)
