RCX511N25 Datasheet Nch 250V 51A Power MOSFET Outline VDSS 250V RDS(on) (Max.) 65m ID 51A PD 84W Features TO-220FM (1) (2) (3) Inner circuit 1) Low on-resistance. 2) Fast switching speed. (1) Gate (2) Drain (3) Source 1 3) Drive circuits can be simple. 4) Parallel use is easy. 1 BODY DIODE (1) (2) (3) 5) Pb-free lead plating ; RoHS compliant 6) 100% Avalanche tested Packaging specifications Packaging Application Switching Power Supply Bulk Reel size (mm) - Tape width (mm) - Type Automotive Motor Drive Basic ordering unit (pcs) Automotive Solenoid Drive Taping code 500 - Marking RCX511N25 Absolute maximum ratings(Ta = 25C) Parameter Symbol Value Unit VDSS 250 V Tc = 25C ID *1 51 A Tc = 100C ID *1 27.7 A 204 A Drain - Source voltage Continuous drain current Pulsed drain current ID,pulse *2 Gate - Source voltage VGSS 30 V Avalanche energy, single pulse EAS *3 197.9 mJ Avalanche current IAR *3 25.5 A Tc = 25C PD 84 W Ta = 25C PD 2.23 W Tj 150 C Tstg 55 to 150 C Power dissipation Junction temperature Range of storage temperature www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 1/12 2016.02 - Rev.B Data Sheet RCX511N25 Thermal resistance Values Parameter Unit Symbol Min. Typ. Max. Thermal resistance, junction - case RthJC - - 1.48 C/W Thermal resistance, junction - ambient RthJA - - 56 C/W Soldering temperature, wavesoldering for 10s Tsold - - 265 C Electrical characteristics(Ta = 25C) Values Parameter Symbol Drain - Source breakdown voltage V(BR)DSS Zero gate voltage drain current IDSS Gate - Source leakage current Gate threshold voltage Static drain - source on - state resistance Conditions VGS = 0V, ID = 1mA Unit Min. Typ. Max. 250 - - V - - 10 A VDS = 250V, VGS = 0V Tj = 25C IGSS VGS = 30V, VDS = 0V - - 100 nA VGS (th) VDS = 10V, ID = 1mA 3.0 - 5.0 V VGS = 10V, ID = 25.5A - 48 65 - 110 155 15 30 - RDS(on) *4 VGS = 10V, ID = 25.5A m Tj = 125C Forward transfer admittance www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. gfs VDS = 10V, ID = 25.5A 2/12 S 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristics(Ta = 25C) Values Parameter Symbol Conditions Unit Min. Typ. Max. Input capacitance Ciss VGS = 0V - 7000 - Output capacitance Coss VDS = 25V - 350 - Reverse transfer capacitance Crss f = 1MHz - 200 - VDD 125V, VGS = 10V - 65 - ID = 25.5A - 300 - RL = 4.7 - 170 - RG = 10 - 210 - Turn - on delay time *4 td(on) tr *4 Rise time Turn - off delay time Fall time *4 td(off) tf *4 pF ns Gate Charge characteristics(Ta = 25C) Values Parameter Symbol *4 Total gate charge Qg Gate - Source charge Qgs *4 Gate - Drain charge Qgd Gate plateau voltage *4 V(plateau) Conditions Unit Min. Typ. Max. VDD 125V - 120 - ID = 51A - 40 - VGS = 10V - 40 - VDD 125V, ID = 51A - 6.5 - nC V Body diode electrical characteristics (Source-Drain)(Ta = 25C) Values Parameter Continuous source current Symbol Conditions Typ. Max. - - 51 A - - 204 A VGS = 0V, IS = 51A - - 1.5 V IS = 25.5A di/dt = 100A/s - 175 - ns - 1100 - nC *1 IS Pulsed source current ISM *2 Forward voltage VSD *4 *4 Reverse recovery time trr Reverse recovery charge Qrr *4 Unit Min. Tc = 25C *1 Limited only by maximum temperature allowed. *2 Pw 10s, Duty cycle 1% *3 L 500H, VDD = 50V, Rg = 25, starting Tj = 25C *4 Pulsed www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 3/12 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristic curves Fig.2 Maximum Safe Operating Area Fig.1 Power Dissipation Derating Curve 120 1000 100 PW = 1ms Drain Current : ID [A] Power Dissipation : PD/PD max. [%] PW = 100s 100 80 60 40 20 10 Operation in this area is limited by RDS(on) 1 PW = 10ms 0.1 Ta=25C Single Pulse 0.01 0 0 25 50 75 100 125 150 0.1 175 1 10 100 1000 Drain - Source Voltage : VDS [V] Junction Temperature : Tj [C] Normalized Transient Thermal Resistance : r(t) Fig.3 Normalized Transient Thermal Resistance vs. Pulse Width 10 Ta=25C Single Pulse Rth(j-c)(t) = r(t)xRth(ch-c) Rth(j-c) = 56C/W 1 0.1 0.01 0.0001 top D = 1 D = 0.5 D = 0.1 D = 0.05 D = 0.01 D = Single 0.01 1 100 Pulse Width : PW [s] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 4/12 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristic curves Fig.5 Avalanche Energy Derating Curve vs Junction Temperature Fig.4 Avalanche Current vs Inductive Load 120 VDD=50V,RG=25 VGF=10V,VGR=0V Starting Tch=25C 100 Avalanche Energy : EAS / EAS max. [%] Avalanche Current : IAS [A] 1000 10 1 0.1 0.01 0.1 1 10 100 80 60 40 20 0 0 100 Coil Inductance : L [mH] 50 75 100 125 150 175 Junction Temperature : Tj [C] Fig.7 Typical Output Characteristics(II) Fig.6 Typical Output Characteristics(I) 25 50 Ta=25C Pulsed 20 VGS=10.0V VGS=8.0V Ta=25C Pulsed VGS=8.0V 15 10 VGS=10.0V 40 Drain Current : ID [A] Drain Current : ID [A] 25 VGS=7.0V 5 30 VGS=7.0V 20 10 VGS=6.0V VGS=6.0V 0 0 0 0.2 0.4 0.6 0.8 1 0 4 6 8 10 Drain - Source Voltage : VDS [V] Drain - Source Voltage : VDS [V] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 2 5/12 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristic curves Fig.9 Typical Transfer Characteristics 100 340 VDS= 10V VGS = 0V ID = 1mA 320 10 Drain Current : ID [A] Normarize Drain - Source Breakdown Voltage : V(BR)DSS [V] Fig.8 Breakdown Voltage vs. Junction Temperature 300 280 260 240 220 1 Ta= 125C Ta= 75C Ta= 25C Ta= 25C 0.1 0.01 0.001 -50 0 50 100 150 0 Junction Temperature : Tj [C] 3 4 5 6 7 8 9 10 Fig.11 Transconductance vs. Drain Current 5.5 100 VDS= 10V VDS = 10V ID = 1mA Transconductance : gfs [S] Gate Threshold Voltage : VGS(th) [V] 2 Gate - Source Voltage : VGS [V] Fig.10 Gate Threshold Voltage vs. Junction Temperature 5.0 1 4.5 4.0 3.5 3.0 2.5 -50 -25 0 25 50 75 Ta= 25C Ta=25C Ta=75C Ta=125C 1 0.1 0.01 0.01 100 125 150 Junction Temperature : Tj [C] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 10 0.1 1 10 100 Drain Current : ID [A] 6/12 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristic curves Fig.12 Static Drain - Source On - State Resistance vs. Gate Source Voltage 1000 Ta=25C 150 ID = 51A 100 ID = 25.5A 50 0 0 5 10 15 Static Drain - Source On-State Resistance : RDS(on) [m] Static Drain - Source On-State Resistance : RDS(on) [m] 200 Fig.13 Static Drain - Source On - State Resistance vs. Drain Current(I) Gate - Source Voltage : VGS [V] Ta=25C VGS = 10V 100 10 1 0.01 0.1 1 10 100 Drain Current : ID [A] Fig.14 Static Drain - Source On - State Resistance vs. Junction Temperature Static Drain - Source On-State Resistance : RDS(on) [m] 150 VGS = 10V ID = 5A 100 50 0 -50 0 50 100 150 Junction Temperature : Tj [C] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 7/12 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristic curves Fig.15 Static Drain - Source On - State Resistance vs. Drain Current(II) Fig.16 Drain Current Derating Curve 120 VGS= 10V Ta=125C Ta=75C Ta=25C Ta= 25C 100 Drain Current Dissipation : ID/ID max. (%) Static Drain - Source On-State Resistance : RDS(on) [m] 1000 100 10 80 60 40 20 0 1 0.01 0.1 1 10 0 100 Drain Current : ID [A] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 25 50 75 100 125 150 175 Junction Temperature : Tj [C] 8/12 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristic curves Fig.17 Typical Capacitance vs. Drain - Source Voltage Fig.18 Switching Characteristics 10000 100000 Ta = 25C f = 1MHz VGS = 0V Switching Time : t [ns] Ciss 10000 Capacitance : C [pF] Ta=25C VDD= 125V VGS= 10V RG=10 1000 Coss 100 Crss tf 1000 td(off) 100 td(on) tr 10 10 0.01 0.1 1 10 100 1000 Drain - Source Voltage : VDS [V] 0.01 0.1 1 10 100 Drain Current : ID [A] Fig.19 Dynamic Input Characteristics 20 Ta=25C VDD= 125V ID= 51A RG=10 Gate - Source Voltage : VGS [V] 18 16 14 12 10 8 6 4 2 0 0 50 100 150 200 250 Total Gate Charge : Qg [nC] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 9/12 2016.02 - Rev.B Data Sheet RCX511N25 Electrical characteristic curves Fig21 Reverse Recovery Time vs.Source Current Fig.20 Source Current vs. Source - Drain Voltage 1000 100 Reverse Recovery Time : trr [ns] VGS=0V Source Current : IS [A] 10 Ta=125C Ta=75C Ta=25C Ta= 25C 1 0.1 0.01 100 Ta=25C di / dt = 100A / s VGS = 0V 10 0.0 0.5 1.0 1.5 0.1 10 100 Source Current : IS [A] Source-Drain Voltage : VSD [V] www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 1 10/12 2016.02 - Rev.B Data Sheet RCX511N25 Measurement circuits Fig.1-1 Switching Time Measurement Circuit VGS Fig.1-2Switching Waveforms Pulse width ID VDS RL D.U.T. 50% 10% VDD RG 90% 50% 10% VGS VDS 10% 90% td(on) ton Fig.2-1 Gate Charge Measurement Circuit VGS tf toff Fig.2-2 Gate Charge Waveform VG ID VDS Qg RL VGS D.U.T. IG(Const.) 90% td(off) tr Qgs VDD Qgd Charge Fig.3-1 Avalanche Measurement Circuit VGS IAS D.U.T. RG Fig.3-2 Avalanche Waveform VDS L V(BR)DSS IAS VDD VDD EAS = www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 11/12 1 2 2 L IAS V(BR)DSS V(BR)DSS - VDD 2016.02 - Rev.B Data Sheet RCX511N25 Dimensions (Unit : mm) D TO-220FM E A E1 A1 A A2 A4 F p b1 L Q c e b DIM A A1 A2 A4 b b1 c D E e E1 F L p Q x x A MILIMETERS MIN MAX 16.60 17.60 1.80 2.20 14.80 15.40 6.80 7.20 0.70 0.85 1.10 1.50 0.70 0.85 9.90 10.30 4.40 4.80 2.54 2.70 3.00 2.80 3.20 11.50 12.50 3.00 3.40 2.10 3.10 0.381 INCHES MIN 0.654 0.071 0.583 0.268 0.028 0.043 0.028 0.39 0.173 MAX 0.693 0.087 0.606 0.283 0.033 0.059 0.033 0.406 0.189 0.10 0.106 0.11 0.453 0.118 0.083 - 0.118 0.126 0.492 0.134 0.122 0.015 Dimension in mm/inches www.rohm.com (c) 2015 ROHM Co., Ltd. All rights reserved. 12/12 2016.02 - Rev.B Notice Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you (Note 1) intend to use our Products in devices requiring extremely high reliability (such as medical equipment , transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property ("Specific Applications"), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM's Products for Specific Applications. (Note1) Medical Equipment Classification of the Specific Applications JAPAN USA EU CHINA CLASS CLASSb CLASS CLASS CLASS CLASS 2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure 3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM's Products under any special or extraordinary environments or conditions. If you intend to use our Products under any special or extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of product performance, reliability, etc, prior to use, must be necessary: [a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents [b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust [c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves [e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items [f] Sealing or coating our Products with resin or other coating materials [g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning residue after soldering [h] Use of the Products in places subject to dew condensation 4. The Products are not subject to radiation-proof design. 5. Please verify and confirm characteristics of the final or mounted products in using the Products. 6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied, confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect product performance and reliability. 7. De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in the range that does not exceed the maximum junction temperature. 8. Confirm that operation temperature is within the specified range described in the product specification. 9. ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in this document. Precaution for Mounting / Circuit board design 1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product performance and reliability. 2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products, please consult with the ROHM representative in advance. For details, please refer to ROHM Mounting specification Notice-PGA-E (c) 2015 ROHM Co., Ltd. All rights reserved. Rev.003 Precautions Regarding Application Examples and External Circuits 1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the characteristics of the Products and external components, including transient characteristics, as well as static characteristics. 2. You agree that application notes, reference designs, and associated data and information contained in this document are presented only as guidance for Products use. Therefore, in case you use such information, you are solely responsible for it and you must exercise your own independent verification and judgment in the use of such information contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of such information. Precaution for Electrostatic This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron, isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control). Precaution for Storage / Transportation 1. Product performance and soldered connections may deteriorate if the Products are stored in the places where: [a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2 [b] the temperature or humidity exceeds those recommended by ROHM [c] the Products are exposed to direct sunshine or condensation [d] the Products are exposed to high Electrostatic 2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is exceeding the recommended storage time period. 3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads may occur due to excessive stress applied when dropping of a carton. 4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of which storage time is exceeding the recommended storage time period. Precaution for Product Label A two-dimensional barcode printed on ROHM Products label is for ROHM's internal use only. Precaution for Disposition When disposing Products please dispose them properly using an authorized industry waste company. Precaution for Foreign Exchange and Foreign Trade act Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign trade act, please consult with ROHM in case of export. Precaution Regarding Intellectual Property Rights 1. All information and data including but not limited to application example contained in this document is for reference only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any other rights of any third party regarding such information or data. 2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the Products with other articles such as components, circuits, systems or external equipment (including software). 3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to manufacture or sell products containing the Products, subject to the terms and conditions herein. Other Precaution 1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM. 2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written consent of ROHM. 3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the Products or this document for any military purposes, including but not limited to, the development of mass-destruction weapons. 4. The proper names of companies or products described in this document are trademarks or registered trademarks of ROHM, its affiliated companies or third parties. Notice-PGA-E (c) 2015 ROHM Co., Ltd. All rights reserved. Rev.003 Datasheet rcx511n25 - Web Page Buy Distribution Inventory Part Number Package Unit Quantity Minimum Package Quantity Packing Type Constitution Materials List RoHS rcx511n25 TO-220FM 500 500 Bulk inquiry Yes