ATC 100 E Series Porcelain High RF Power Multilayer Capacitors * Case E Size (.380" x .380") * Capacitance Range 1 pF to 5100 pF * High Q * Ultra-Stable Performance * Low ESR/ESL * High RF Current/Voltage * High RF Power * High Reliability * Extended WVDC up to 7200 VDC * Available with Encapsulation Option* ELECTRICAL AND MECHANICAL SPECIFICATIONS ATC, the industry leader, offers new improved ESR/ESL performance for the 100 E Series RF Capacitors. This high Q multilayer capacitor is ultrastable under high RF current and voltage applications. High density porcelain construction provides a rugged, hermetic package. ATC offers an encapsulation option for applications requiring extended protection agains arc-over and corona. Typical functional applications: Bypass, Coupling, Tuning, Impedance Matching and DC Blocking. Typical circuit applications: HF/RF Power Amplifiers, Transmitters, Antenna Tuning, Plasma Chambers and Medical (MRI coils). QUALITY FACTOR (Q): *For leaded styles only WORKING VOLTAGE (WVDC): ENVIRONMENTAL TESTS DIELECTRIC WITHSTANDING VOLTAGE (DWV): 250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds. 150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds. 120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds. ATC 100 E Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: Greater than 10,000 (1 pF to 1000 pF) @ 1 MHz. Greater than 10,000 (1100 pF to 5100 pF) @ 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): +90 30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 1 pF to 5100 pF: 105 Megohms min. @ +25C at 500 VDC. 104 Megohms min. @ +125C at 500 VDC. See Capacitance Values Table, page 2. RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. MIL-STD-202, Method 107, Condition A. AGING EFFECTS: None MOISTURE RESISTANCE: PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. OPERATING TEMPERATURE RANGE: LIFE TEST: Available in various surface mount and leaded styles. See Mechanical Configurations, page 3. MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage applied. 200% of WVDC for capacitors rated at 500 volts DC or less. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC. From -55C to +125C (No derating of working voltage). TERMINATION STYLES: TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 10 lbs. min., 25 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-809 Rev. K 3/10 ATC 100 E Capacitance Values 7200 3600 7200 F, G, J K, M 47 51 56 62 68 75 82 91 100 110 120 F, G, J, 3600 130 K, M 150 160 180 200 220 240 270 300 330 360 VOLTAGE B, C D RATED WVDC CAP. CAP. STD. EXT. CODE (pF) 7200 EXTENDED 470 510 560 620 680 750 820 910 101 111 121 131 151 161 181 201 221 241 271 301 331 361 TOL. VOLT. 3600 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 RATED WVDC CAP. CAP. STD. EXT. CODE (pF) 5000 EXT. B, C D 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 TOL. EXTENDED VOLTAGE EXTENDED VOLTAGE 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 RATED WVDC CAP. CAP. STD. EXT. CODE (pF) EXTENDED VOLTAGE 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 TOL. EXTENDED VOLTAGE CAP. CAP. CODE (pF) N/A 391 431 471 511 561 621 681 751 821 911 102 112 122 152 182 222 272 302 332 392 472 512 TOL. 390 430 470 510 560 620 680 750 820 F, G, J, 910 K, M 1000 1100 1200 1500 1800 2200 2700 3000 3300 G, J, 3900 K, M 4700 5100 RATED WVDC STD. EXT. 3600 2500 N/A 1000 500 VRMS = 0.707 X WVDC * SPECIAL VALUES, TOLERANCES, MATCHING, AND CAPACITOR ASSEMBLIES ARE AVAILABLE. * ATC'S CUSTOM POWER CAPACITOR ASSEMBLY CATALOG, ATC # 001-900 LISTS ASSEMBLY OPTIONS. * EXTENDED WORKING VOLTAGES ARE AVAILABLE FOR COMMERCIAL ORDERS ONLY. * ENCAPSULATION OPTION AVAILABLE. PLEASE CONSULT FACTORY. CAPACITANCE TOLERANCE J B C D F G K M Code Tol. 0.1 pF 0.25 pF 0.5 pF 1% 2% 5% 10% 20% ATC PART NUMBER CODE ATC100 E 39 1 K W 3600 X C Series Packaging C - ATC Matrix Tray (Standard) T - Tape and Reel, 250 pc. qty. I - Special Packaging. Consult Factory Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Laser Marking Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Termination Code Capacitance Tolerance The above part number refers to a 100 E Series (case size E) 390 pF capacitor, K tolerance (10%), 3600 WVDC, with W termination (Tin /Lead, Solder Plated over Nickel Barrier), laser marking and Waffle-packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N 2 w Consult factory for additional performance data. T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 100 E Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE BODY DIMENSIONS INCHES (mm) OUTLINES ATC CASE SIZE TERM. & TYPECASE SIZE CODE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) Y 100E W W E Solder Plate L E 100E T Y W P L T Pellet T W E Solderable Nickel Barrier L T CA W E L Gold Chip OVERLAP (Y) T Tin /Lead, Solder Plated over Nickel Barrier Termination .380 +.040 -.010 (9.65 +1.02 -0.25) Heavy Tin/Lead Coated, over Nickel Barrier Termination TL E .040 (1.02) max. RoHS Compliant Tin Plated over Nickel Barrier Termination RoHS Compliant Gold Plated over Nickel Barrier Termination .380 .010 (9.65 0.25) .170 (4.32) max. High Purity Silver Leads LL 100E MS WL W Microstrip L LL = .750 (19.05) min. WL = .350 .010 T (8.89 0.25) TL = .010 .005 (0.25 0.13) Leads are Attached with High Temperature Solder. TL E LL 100E AR WL W Axial Ribbon L T E 100E .380 +.035 -.010 (9.65 +0.89 -0.25) N/A Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 2.25 (57.2) min. AW Axial Wire E 100E MATERIALS .380 +.015 -.010 (9.65 +0.38 -0.25) .380 +.015 -.010 (9.65 +0.38 -0.25) Y 100E THICKNESS (T) .380 +.015 -.010 (9.65 +0.38 -0.25) Y 100E WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 1.0 (25.4) min. RW Radial Wire Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. A M E R I C A N 3 T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 100 E Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE BODY DIMENSIONS INCHES (mm) OUTLINES ATC TERM. CODE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) W E WN Non-Mag Solder Plate L T Y 100E W E PN Non-Mag Pellet L T 100E TN W Non-Mag Solderable Barrier L T 100E LL MN WL Non-Mag Microstrip W L T .040 (1.02) max. Tin Plated over Non-Magnetic Barrier Termination High Purity Silver Leads .170 (4.32) max. LL = .750 (19.05) min. WL = .350 .010 (8.89 0.25) TL = .010 .005 (0.25 0.13) Leads are Attached with High Temperature Solder. TL AN WL Non-Mag Axial Ribbon .380 +.035 -.010 (9.65 +0.89 -0.25 W L T E 100E N/A Non-Mag Axial Wire Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 2.25 (57.2) min. Non-Mag Radial Wire Silver-plated Copper Leads Dia. = .032 .002 (.813 .051) LL = 1.0 (25.4) min BN 100E E RN Heavy Tin/Lead Coated, over Non-Magnetic Barrier Termination RoHS Compliant LL 100E MATERIALS Tin/Lead, Solder Plated over Non-Magnetic Barrier Termination .380 +.015 -.010 (9.65 +0.38 -0.25) TL E OVERLAP (Y) -0.25) .380 +.015 -.010 (9.65 +0.38 -0.25) Y E THICKNESS (T) .380 +.015 -.010 (9.65 +0.38 -0.25) .380 +.040 -.010 (9.65 +1.02 Y 100E WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. Suggested Mounting Pad Dimensions T L W L W K 391K 1 9 3 T Horizontal Electrode Orientation Vertical Mount Vertical Electrode Orientation B A Case E B Horizontal Mount Pad Size Normal A Min. B Min. C Min. D Min. .185 .050 .325 .425 High Density .165 .030 .325 .385 Normal .405 .050 .325 .425 High Density .385 .030 .325 .385 C D A M E R I C A N 4 T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w w w C E R A M I C S ATC Europe ATC Asia +46 8 6800410 * sales@atceramics-europe.com +86-755-2396-8759 * sales@atceramics-asia.com . a t c e r a m i c s . c o m ATC 100 E Performance Data ESR VS. CAPACITANCE ATC SERIES 100, CASE E Q VS. CAPACITANCE ATC SERIES 100, CASE E 100000 10000 30 MHz 0.1 Q ESR (Ohms) 1 30 MHz 1000 (Typical) (Typical) 0.01 1 10 100 100 1000 1 100 CAPACITANCE (pF) (1.0 pF to 400 pF) ESR VS. CAPACITANCE ATC SERIES 100, CASE E Q VS. CAPACITANCE ATC SERIES 100, CASE E 30 MHz 30MHz Q 0.01 100 (Typical) (Typical) 0.001 100 10 1000 10000 100 1000 CAPACITANCE (pF) (430 pF to 5100 pF) T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w w 10000 CAPACITANCE (pF) (430 pF to 5100 pF) A M E R I C A N 5 1000 1000 0.1 ESR (Ohms) 10 CAPACITANCE (pF) (1.0 pF to 400 pF) C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia +86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 100 E Performance Data CAPACITANCE CHANGE VS. TEMPERATURE ATC SERIES 100, CASE E SERIES RESONANCE VS. CAPACITANCE ATC SERIES 100, CASE E 0000 2 % CHANGE IN CAPACITANCE FREQUENCY (MHz) 1.5 1000 100 (Typical) 1 0.5 0 -0.5 -1 -1.5 -2 10 1 10 100 1000 -55 10000 5 25 45 65 85 105 CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE E CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE E 100 RMS CURRENT (Amps) 30 MHz 125 The current rating is based on a 65C mounting surface and a device thermal resistance of 12C/W. A power dissipation of 5W will result in a case temperature of 125C. 10 0.1 1 -15 TEMPERATURE (Degrees C) The current rating is based on a 65C mounting surface and a device thermal resistance of 12C/W. A power dissipation of 5W will result in a case temperature of 125C. 1 -35 CAPACITANCE (pF) 100 RMS CURRENT (Amps) TC= +90 30 PPM/C 10 MHz 2 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 10 100 10 MHz 30 MHz 10 2 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 1 100 1000 1000 10000 CAPACITANCE (pF) (430 pF to 5100 pF) CAPACITANCE (pF) (1.0 pF to 400 pF) CURRENT RATING VS. CAPACITANCE ATC SERIES 100, CASE E, EXTENDED VOLTAGE RMS CURRENT (Amps) 100 The current rating is based on a 65C mounting surface and a device thermal resistance of 12C/W. A power dissipation of 5W will result in a case temperature of 125C. 10 30 MHz 10 MHz 1 0.1 1 2 MHz Dotted line = Power dissipation limited Solid line = Voltage limited (Vrms) 10 100 1000 CAPACITANCE (pF) (1.0 pF to 400 pF) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 1996 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-809 Rev. K 3/10