APEM www.apem.com 1
New! HR series
Proportional output thumbwheels - sprung to centre
Distinctive features and specifications
❑ High reliability, long life
❑ Sealed to IP68
❑ Backlighting option
❑ EMI/RFI shielding
❑ Other detent options on request
❑ Patented solution
ENVIRONMENTAL SPECIFICATIONS
• Electronics sealed to IP68 according to IEC 60529
• Shock resistance : 50 g during 11ms
• Vibration resistance : 10-500Hz - 5g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -30°C to +70°C
• Storage temperature : -40°C to +85°C
• EMI/RFI shielding : IEC 61000-4-3 and ISO 11452-2 (100V/m)
• ESD discharges : 16KV according to EN 61000-4-2
ELECTRICAL SPECIFICATIONS
• Hall effect sensor
• Supply voltage : 5VDC +/- 0,5V
• Reverse polarity : -10V max.
• Overvoltage : +20V max.
• Return to center voltage (no load) : +/- 0,2V
• Consumption : 11mA max. (single output)
22mA max. (dual output)
• LED supply : 6VDC 10mA
GENERAL SPECIFICATIONS
•
APEM SAS patented design
• Mechanical operating angle :
+/- 35° (versions S/G/L)
+/- 20° (version K)
• Sprung to center
• Operating force at center:
2N +/- 0,5N (without detent position)
4N +/- 0,5N (with detent position)
• Mechanical life : 5 million cycles
(without detent)
MATERIALS
• Wheel : polyamide with colouring
• Support : polyamide, black
• Electronics sealing : epoxy
• Connector : polyester (Molex
0510210700)
• Multiwire lead AWG28
Tolerance : The general tolerance for dimensions in this brochure is ± 0,3 (.012).
Dimensions, specifications and data shown in this brochure are subject to change without notice.
HR1504-A-R1
2 APEM www.apem.com
New!
HR series
Proportional output thumbwheels - sprung to centre
Overview
HR
SERIES
Actuator styles
SWheel with 1 tab
GReversed wheel with 1 tab
KWheel with 2 tabs
LWheel without tab
Backlighting
1Yes
0No
Wheel colours
1Blue
BDark blue
2Black
3Green
5Yellow
6Red
7White
9Orange
Linear output options
ASingle - 0/5V
BSingle - 0,5/4,5V
CDual - 0/5V
DDual - 0,5/4,5V
EInverse dual - 0,5/4,5V
FInverse dual - 0/5V
Mechanical functions
0Sprung to centre
without centre detent
1Sprung to centre
with centre detent
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches
- options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
Mounting accessories : standard hardware supplied : 2 self-tapping screws DELTA PT® 22x08 for plastic.
Packaging unit : 20 pieces
Panel mounting
2Rear
Other detent options: on request.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
APEM www.apem.com 3
New! HR series
Proportional output thumbwheels - sprung to centre
Actuator styles
Wheel with 1 tab - version S
HRS2
Reversed wheel with 1 tab - version G
HRG2
Wheel with 2 tabs - version K
HRK2
Wheel without tab - version L
HRL2
EXAMPLE OF MOUNTING
4 APEM www.apem.com
HR series
Proportional output thumbwheels - sprung to centre
Options
New!
BACKLIGHTING
1Yes
0No
WHEEL COLOURS
1: Blue - B: Dark blue - 2: Black - 3: Green - 4: Grey - 5: Yellow - 6: Red - 7: White - 9: Orange
APEM www.apem.com 5
HR series
Proportional output thumbwheels - sprung to centre
Options
New!
A Single - 0/5V
LINEAR OUTPUT OPTIONS
5,0
4,5
4,0
3,5
3
2,5
2
1,5
1,0
0,5
0 AXES TRAVEL ()
OUT PUT VOLTAGE (V)
MAX MIN
B Single - 0,5/4,5V
5,0
4,5
4,0
3,5
3
2,5
2
1,5
1,0
0,5
0 AXES TRAVEL ()
OUT PUT VOLTAGE (V)
MAX MIN
C Dual - 0/5V
5,0
4,5
4,0
3,5
3
2,5
2
1,5
1,0
0,5
0 AXES TRAVEL ()
OUT PUT VOLTAGE (V)
MAX MIN
D Dual - 0,5/4,5V
5,0
4,5
4,0
3,5
3
2,5
2
1,5
1,0
0,5
0 AXES TRAVEL ()
OUT PUT VOLTAGE (V)
MAX MIN
E Inverse dual - 0,5/4,5V
5,0
4,5
4,0
3,5
3
2,5
2
1,5
1,0
0,5
0 AXES TRAVEL ()
OUT PUT VOLTAGE (V)
MAX MIN
F Inverse dual - 0/5V
5,0
4,5
4,0
3,5
3
2,5
2
1,5
1,0
0,5
0 AXES TRAVEL ()
OUT PUT VOLTAGE (V)
MAX MIN
Note: The output voltage cannot be superior to the power supply voltage.
For 0/5V versions, the power supply should not be lower than 5V.
output 1
output 2
6 APEM www.apem.com
HR series
Proportional output thumbwheels - sprung to centre
Options - Connections
New!
MECHANICAL FUNCTIONS
0Sprung to centre without centre detent
1Sprung to centre with centre detent Other : on request.
Pin
Single output without backlighting
Function
1
Colour
2Power supply: +VDC 5V Red
3
4
5
6Output
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
Ground 0V Black
Pin
Single output with backlighting
Function Colour
Power supply: +VDC 5V Red
LED + Yellow
LED - Blue
Output White
Ground 0V Black
Pin
Dual output without backlighting
Function Colour
Power supply: +VDC 5V Red
Output 2 Green
Output 1 White
Ground 0V Black
Pin
Dual output with backlighting
Function Colour
Power supply: +VDC 5V Red
LED+ Yellow
LED- Blue
Output 2 Green
Output 1 White
Ground 0V Black
CONNECTIONS
H R 1 5 0 4 - A - R 1
TRAVEL MIN
TRAVEL MAX
Wiring harness with multiwire lead
AWG28. Length 140 mm
