Features
n Compliant with AEC-Q200 Rev-C- Stress
Test Qualification for Passive Components
in Automotive Applications
n Operating temperature range up to 125 °C
n Low thermal derating factor
n Higher hold currents at elevated
temperature
n Choice of operating currents
n RoHS compliant* and halogen free**
n Resettable fault protection of general
electronic equipment
MF-RHT Series - High Temperature PTC Resettable Fuses
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine
(Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page
of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Electrical Characteristics
Model V max.
Volts
I max.
Amps
Ihold Itrip Resistance Max. Time
To Trip
Tripped Power
Dissipation
Amperes
at 23 °C
Ohms
at 23 °C
Amperes
at 23 °C
Seconds
at 23 °C
Watts
at 23 °C
Hold Trip RMin. R1Max.
(Post Trip) Max. Typ.
MF-RHT050 30 40 0.5 0.92 0.4800 1.10 2.5 2.5 0.9
MF-RHT070 16 40 0.7 1.4 0.3000 0.80 3.5 4.0 1.4
MF-RHT100 30 40 1.0 1.8 0.1800 0.43 5.0 5.2 1.4
MF-RHT200 16 100 2.0 3.8 0.0450 0.110 12.5 3.0 1.4
MF-RHT200/32 32 50 2.0 3.8 0.0450 0.110 12.5 3.0 1.4
MF-RHT300 16 100 3.0 6.0 0.0330 0.079 15.0 5.0 3.0
MF-RHT400 16 100 4.0 7.5 0.0240 0.060 20.0 5.0 3.3
MF-RHT450 16 100 4.5 7.8 0.0220 0.054 22.5 3.0 3.6
MF-RHT500 16 100 5.0 9.0 0.0175 0.045 25.0 9.0 3.6
MF-RHT550 16 100 5.5 10.0 0.0150 0.037 27.5 6.0 3.5
MF-RHT600 16 100 6.0 10.8 0.0130 0.0215 30.0 5.0 4.1
MF-RHT650 16 100 6.5 12.0 0.0110 0.026 32.5 5.5 4.3
MF-RHT700 16 100 7.0 13.0 0.0100 0.025 35.0 7.0 4.0
MF-RHT750 16 100 7.5 13.1 0.0094 0.022 37.5 7.0 4.5
MF-RHT800 16 100 8.0 15.0 0.0080 0.020 40.0 8.0 4.2
MF-RHT900 16 100 9.0 16.5 0.0074 0.017 45.0 10.0 5.0
MF-RHT1000 16 100 10.0 18.5 0.0062 0.015 50.0 9.0 5.3
MF-RHT1100 16 100 11.0 20.0 0.0055 0.013 55.0 11.0 5.5
MF-RHT1300 16 100 13.0 24.0 0.0041 0.010 60.0 13.0 6.9
Test Procedures And Requirements For Model MF-RHT Series
Test Test Conditions Accept/Reject Criteria
Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description
Resistance ............................................................ In still air @ 23 °C ................................................. Rmin ≤ R ≤ R1max
Time to Trip ........................................................... At specied current, Vmax, 23 °C ......................... T ≤ max. time to trip (seconds)
Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip
Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning
Trip Endurance ..................................................... Vmax, 48 hours ..................................................... No arcing or burning
Solderability .......................................................... MIL-STD-202, Method 208 ................................... 95 % min. coverage
RH750
7180S
*RoHS COMPLIANT
*RoHS COMPLIANT
& AEC APPROVED
*RoHS COMPLIANT, **HALOGEN FREE
& AEC COMPLIANT
*RoHS and
AEC-Q200 COMPLIANT
LEAD FREE
*RoHS COMPLIANT
VERSIONS
AVAILABLE
LEAD FREE
VERSIONS ARE
RoHS COMPLIANT*
Environmental Characteristics
Operating Temperature ......................................... -40 °C to +125 °C
Storage Temperature ............................................ -40 °C to +85 °C
Passive Aging ....................................................... +85 °C, 1000 hours ............................................... ±5 % typical resistance change
Humidity Aging...................................................... +85 °C, 85 % R.H. 1000 hours ............................. ±5 % typical resistance change
Thermal Shock ..................................................... MIL-STD-202, Method 107 ................................... ±10 % typical resistance change
+125 °C to -40 °C, 10 cycles
Vibration ............................................................... MIL-STD-883C, Method 2007.1, ........................... No change
Condition A
Moisture Sensitivity Level (MSL) .......................... Level 1
ESD Classication - HBM ..................................... Class 6
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-RHT Series - High Temperature PTC Resettable Fuses
Applications
n Protection of automotive circuitry including engine control modules
n Overcurrent surge protection of electronic equipment required to operate at high operating temperature ranges
n Resettable fault protection of general electronic equipment
Typical Part Marking
Represents total content. Layout may vary.
RH750
7180S
MANUFACTURER'S
TRADEMARK
PART
IDENTIFICATION
COUNTRY OF
MANUFACTURE
(S = CHINA)
DATE CODE
(FIRST DIGIT =
LAST DIGIT OF YEAR;
NEXT THREE DIGITS =
DAY OF YEAR)
EXAMPLE: 7180 = 2017 DAY 180
Thermal Derating Chart - Ihold (Amps)
Model Ambient Operating Temperature
-40 °C -20 °C 0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C 125 °C
MF-RHT050 0.68 0.62 0.56 0.5 0.44 0.4 0.36 0.34 0.28 0.12
MF-RHT070 0.95 0.87 0.79 0.7 0.62 0.56 0.51 0.47 0.39 0.17
MF-RHT100 1.36 1.24 1.13 1.0 0.89 0.80 0.73 0.67 0.56 0.24
MF-RHT200 2.71 2.49 2.26 2.00 1.77 1.60 1.46 1.34 1.11 0.49
MF-RHT200/32 2.71 2.49 2.26 2.00 1.77 1.60 1.46 1.34 1.11 0.49
MF-RHT300 4.07 3.74 3.41 3.00 2.65 2.40 2.21 2.00 1.66 0.74
MF-RHT400 5.57 5.11 4.65 4.00 3.62 3.29 3.01 2.73 2.27 1.01
MF-RHT450 6.1 5.6 5.1 4.5 4.0 3.6 3.3 3.0 2.5 1.1
MF-RHT500 6.78 6.22 5.67 5.0 4.44 4 3.67 3.33 2.78 1.22
MF-RHT550 7.47 6.86 6.24 5.5 4.85 4.41 4.04 3.66 3.05 1.36
MF-RHT600 8.20 7.50 6.80 6.0 5.3 4.9 4.4 4 3.3 1.5
MF-RHT650 8.8 8.1 7.4 6.5 5.7 5.3 4.8 4.3 3.6 1.6
MF-RHT700 9.51 8.73 7.95 7.0 6.17 5.61 5.15 4.66 3.88 1.73
MF-RHT750 10.2 9.4 8.6 7.5 6.6 6.1 5.6 5.0 4.1 1.9
MF-RHT800 10.87 9.98 9.08 8.0 7.06 6.41 5.88 5.33 4.43 1.97
MF-RHT900 12.21 11.19 10.16 9.0 7.97 7.20 6.56 6.04 5.01 2.19
MF-RHT1000 13.6 12.5 11.4 10.0 8.8 8.10 7.40 6.60 5.50 2.5
MF-RHT1100 14.94 13.72 12.49 11.0 9.7 8.82 8.09 7.32 6.09 2.71
MF-RHT1300 17.7 16.3 14.8 13.0 11.4 10.5 9.6 8.6 7.2 3.3
How to Order
MF - RHT 200 /32 - __ - 14
Multifuse® Product Designator
Series
RHT = High Temperature Radial Leaded Component
Hold Current, Ihold
050 - 1300 (0.50 - 13.00 Amps)
Higher Voltage Option
Blank = Standard Voltage
/32 = 32 Volts
Packaging Options
Blank = Bulk Packaging
- 2 = Tape & Reel*
- AP = Ammo-Pak*
Part Number Sufx Option
- 14 = Kinked Leads in Place of Std. Straight Leads
- 17 = Straight Leads in Place of Std. Kinked Leads
*Packaged per EIA 486-B
MF-RHT Series - High Temperature PTC Resettable Fuses
Product Dimensions
Model A B C D E F Physical Characteristics
Max. Max. Nom. Tol. ± Min. Max. Nom. Style Material
MF-RHT050 7.40
(0.291)
12.7
(0.500)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.51
(0.020) 3 Sn/CuFe
MF-RHT070 6.86
(0.27)
10.8
(0.425)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.51
(0.020) 1 Sn/CuFe
MF-RHT100 9.70
(0.382)
13.6
(0.535)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.51
(0.020) 3 Sn/CuFe
MF-RHT200 9.4
(0.37)
14.0
(0.55)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.51
(0.020) 3 Sn/CuFe
MF-RHT200/32 9.4
(0.37)
14.0
(0.55)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.51
(0.020) 3 Sn/CuFe
MF-RHT300 8.80
(0.35)
13.8
(0.55)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT400 10.0
(0.394)
15.0
(0.591)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT450 10.4
(0.41)
15.6
(0.61)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT500 11.2
(0.441)
18.9
(0.744)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT550 11.2
(0.441)
18.9
(0.744)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT600 11.2
(0.441)
21.0
(0.827)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT650 12.7
(0.50)
22.2
(0.88)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT700 14.0
(0.55)
21.9
(0.862)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT750 14.0
(0.55)
23.5
(0.93)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT800 16.5
(0.65)
22.5
(0.88)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT900 16.5
(0.65)
25.7
(1.012)
5.1
(0.201)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT1000 17.5
(0.689)
26.7
(0.51)
10.2
(0.402)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT1100 21.0
(0.65)
26.1
(0.88)
10.2
(0.402)
0.7
(0.028)
7.6
(0.30)
3.0
(0.12)
0.81
(0.032) 2 Sn/Cu
MF-RHT1300 23.5
(0.925)
28.7
(1.17)
10.2
(0.402)
0.7
(0.028)
7.6
(0.30)
3.6
(0.14)
1.0
(0.040) 2 Sn/Cu
AE
B
D
C
E
B
D
A
CF F F
AE
B
D
C
Also available with kinked and straight leads in
place of standard leads (see How to Order).
DIMENSIONS: MM
(INCHES)
Packaging:
BULK: MF-RHT050~MF-RHT800 = 500 pcs. per bag; MF-RHT900~MF-RHT1300 = 250 pcs. per bag
TAPE & REEL: MF-RHT050~MF-RHT400 = 3000 pcs. per reel; MF-RHT450~MF-RHT700 = 1500 pcs. per reel;
MF-RHT750~MF-RHT1300 = 1000 pcs. per reel
AMMO-PACK: MF-RHT050~MF-RHT400 = 2000 pcs. per pack; MF-RHT450~MF-RHT900 = 1000 pcs. per pack, MF-RHT1000~MF-RHT1300 = 500 pcs. per pack
0.51 (24AWG)
0.81 (20AWG)
1.0 (18AWG)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-RHT Series - High Temperature PTC Resettable Fuses
Typical Time to Trip at 23 ˚C
The Time to Trip curves represent typical performance of a device in a simulated application environment.
Actual performance in specic customer applications may differ from these values due to the inuence of other variables.
0.01
0.1
1
10
100
1000
110100
Fault Current (Amps)
Time to Trip (Seconds)
MF-RHT1300
MF-RHT1100
MF-RHT1000
MF-RHT900
MF-RHT800
MF-RHT750
MF-RHT700
MF-RHT650
MF-RHT100
MF-RHT070
MF-RHT050
MF-RHT200, MF-RHT200/32
MF-RHT300
MF-RHT400
MF-RHT450
MF-RHT500
MF-RHT550
MF-RHT600
MF-RHT SERIES, REV. N, 05/18
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
IEC EIA Dimensions
Dimension Description Mark Mark Dimensions Tolerance
Carrier tape width W W 18 -0.5/+1.0
(.709) (-0.02/+.039)
Hold down tape width W0 W4 11 min.
(.433)
Hold down tape No protrusion
Top distance between tape edges W2W63max.
(.118)
Sprocket hole position W1W59 -0.5/+0.75
(.354) (-0.02/+0.03)
Sprocket hole diameter D0D04 ±0.2
(.157) (±.0078)
Abscissa to plane (straight lead) H H 18.5 ±3.0
(.728) (±.118)
Abscissa to plane (kinked lead) H0H016 ±0.5
(.63) (±.02)
Abscissa to top: MF-RHT050 ~ MF-RHT450 H1H1 32.2 max.
(1.268)
Abscissa to top: MF-RHT500 ~ MF-RHT1300 H1H1 45.0 max.
(1.837)
Overall width w/lead protrusion: MF-RHT050 ~ MF-RHT450 C1 42.5 max.
(1.673)
Overall width w/lead protrusion: MF-RHT500 ~ MF-RHT1300 C1 55.0 max.
(2.165)
Overall width w/o lead protrusion: MF-RHT050 ~ MF-RHT450 C242.5 max.
(1.673)
Overall width w/o lead protrusion: MF-RHT500 ~ MF-RHT1300 C254.0 max.
(2.126)
Lead protrusion I1L1 1.0 max.
(.039)
Protrusion of cutout L L 11 max.
(.433)
Protrusion beyond hold-down tape I2I2 Notspecied
Sprocket hole pitch P0P0 12.7 ±0.3
(0.5) (±.012)
Pitch tolerance 20 consecutive ±1
(±.039)
Device pitch 25.4 ±0.6
(1.0) (±.024)
Tape thickness t t 0.9 max.
(.035)
Tape thickness with splice: MF-RHT050 ~ MF-RHT200 t11.5 max.
(.059)
Tape thickness with splice: MF-RHT300 ~ MF-RHT1300 t12.3 max.
(.091)
Splice sprocket hole alignment 4.0 ±0.2
(.157) (±.008)
Body lateral deviation Δh Δh0±1
(±.039)
Body tape plane deviation Δp Δp0±0.3
(±.012)
Ordinate to adjacent component lead P1 P1 3.81 ±0.07
(.015) (±.028)
MF-RHT Series Tape and Reel Specifications
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Devices taped using EIA468–B/IEC60286-2 standards. See table below and Figures 1 and 2 for details.
DIMENSIONS: MM
(INCHES)
DIMENSIONS: MM
(INCHES)
h
w
h
f
d
Reel
Upper side
Tape
Lower side
User
direction
of
feed
t
User direction of feed
Cross section A - B
pp
H
H1
Reference plane
W0
H0W1
W
AB
F
D0
P0
I1
I2
L
H1
P1
h
h
h
w
h
f
d
Reel
Upper side
Tape
Lower side
User
direction
of
feed
t
User direction of feed
Cross section A - B
pp
H
H1
Reference plane
W0
H0W1
W
AB
F
D0
P0
I1
I2
L
H1
P1
h
h
IEC EIA Dimensions
Dimension Description Mark Mark Dimensions Tolerance
Lead spacing: MF-RHT050 ~ MF-RHT900 F F 5.08 -0.2/+0.8
(0.2) (-0.006/+0.031)
Lead spacing: MF-RHT1000 ~ MF-RHT1300 F F 10.2 -0.2/+0.8
(0.402) (-0.006/+0.031)
Reel width: MF-RHT050 ~ MF-RHT450 w W256 max.
(2.20)
Reel width: MF-RHT500 ~ MF-RHT1300 w W263.5 max.
(2.50)
Reel diameter d a 370.0 max.
(14.57)
Spacebetweenangeslessdevice 4.75 ±3.25
W1 h(.187) (±.128)
Arbor hole diameter f c 26.0 ±12.0
(1.02) (±.472)
Core diameter h n 80.0 max.
(3.15)
Box 62 355 345
(2.44) (14.0) (13.6)
Consecutive missing places 3 max.
Emptyplacesperreel Notspecied
MF-RHT Series Tape and Reel Specifications
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Taped Component Dimensions - Figure 1
Reel Dimensions - Figure 2
DIMENSIONS: MM
(INCHES)
3312 - 2 mm SMD Trimming Potentiometer
Application Notice
MFAN 12/18
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Bourns® Multifuse® PPTC Resettable Fuses
• Users are responsible for independent and adequate evaluation of Bourns® Multifuse® Polymer PTC devices in the user’s
application, including the PPTC device characteristics stated in the applicable data sheet.
• Polymer PTC devices must not be allowed to operate beyond their stated maximum ratings. Operation in excess of such
maximum ratings could result in damage to the PTC device and possibly lead to electrical arcing and/or re. Circuits with
inductance may generate a voltage above the rated voltage of the polymer PTC device and should be thoroughly evaluated
within the user’s application during the PTC selection and qualication process.
• Polymer PTC devices are intended to protect against adverse effects of temporary overcurrent or overtemperature
conditions up to rated limits and are not intended to serve as protective devices where overcurrent or overvoltage conditions
are expected to be repetitive or prolonged.
• In normal operation, polymer PTC devices experience thermal expansion under fault conditions. Thus, a polymer PTC
device must be protected against mechanical stress, and must be given adequate clearance within the user’s application to
accommodate such thermal expansion. Rigid potting materials or xed housings or coverings that do not provide adequate
clearance should be thoroughly examined and tested by the user, as they may result in the malfunction of polymer PTC
devices if the thermal expansion is inhibited.
• Exposure to lubricants, silicon-based oils, solvents, gels, electrolytes, acids, and other related or similar materials may
adversely affect the performance of polymer PTC devices.
• Aggressive solvents may adversely affect the performance of polymer PTC devices. Conformal coating, encapsulating,
potting, molding, and sealing materials may contain aggressive solvents including but not limited to xylene and toluene,
which are known to cause adverse effects on the performance of polymer PTCs. Such aggressive solvents must be
thoroughly cured or baked to ensure their complete removal from polymer PTCs to minimize the possible adverse effect
on the device.
• Recommended storage conditions should be followed at all times. Such conditions can be found on the applicable data
sheet and on the Multifuse® Polymer PTC Moisture/Reow Sensitivity Classication (MSL) note:
https://www.bourns.com/docs/RoHS-MSL/msl_mf.pdf
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
its aliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current
and complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in dierent applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specic devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
dierences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
their devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining
applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property
or environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives
on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at
the user’s sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III
devices and generally equivalent classications outside of the United States.
Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at
the user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns
and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall
also apply to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties
of tness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R