Combo-D INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Series Size 20 Fixed Signal Contacts Size 8 Removable Power, Shielded and High Voltage Contacts Military/Industrial Quality Connectors U.L. Recognized CSA Recognized File #E49351 File #LR54219 D.E.S.C. 85039 Telecommunication U.L. File #E140980 Combo-D Series connectors permit mixed contact combinations of power, shielded, high voltage and signal contacts within the same con- nector body. Twenty connector variants are offered in six standard shell sizes. Two performance levels of Combo-D Series connectors are offered. The CBD Series connectors are professional quality connectors rec- ommended for use in sheltered, noncorrosive indoor and outdoor envi- ronments having normal ventilation, but without temperature or humidi- ty controls. The CBM Series connectors are military quality connectors recommended for use in sheltered, mildly corrosive environments hav- ing a wide range of temperature, pressure and humidity changes. These connectors will meet the applicable performance and dimen- sional requirements of IEC 807-2, Performance Level One and Two, and D.E.S.C. 85039. Combo-D Series connectors utilize precision machined signal con- tacts. Connector variants are available with contact terminations for sol- der and straight and 90 printed board mount terminations featuring a choice of inch or metric printed board footprints. Power, shielded and high voltage contacts are removable, having sol- der and straight and 90 printed board mount terminations. Power and shielded contacts are available with crimp terminations. For low level shielding requirements, ferrite inductors may be attached to both signal and power contacts of connectors having con- tact terminations which are straight or 90 angled for printed board mounting applications. Additional details may be obtained from the fac- tory Applications Engineering Department. The female power contacts feature the Large Surface Area (L.S.A.) closed entry contact design which provides maximum mating surfaces between male and female contacts and reduced contact resistance dur- ing operation. A wide assortment of printed board mounting hardware, cable sup- port hoods, and locking systems is available from stock. A blind mating system is available for applications requiring connec- tor coupling in recessed areas or mobile power coupling systems. CBD SERIES CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE SHELL SIZE 1 Ov O 3W3 SHELL SIZE 2 4, Ai 2 6 7W2 5wi 14W1 SHELL SIZE 3 (O00 0) OVOKO) (CORREA) (ORs DO eI 5W5 9W4 13W3 17W2 21W1 SHELL SIZE 4 OOCCODO0O G89} (OO RESET OO) 8W 13W6 17W5 Positronic Industries, Inc.INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS COMBO-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: Insulator: Glass filled polyester per MIL-M-24519 UL 94V-0, blue color, and composite. Male contacts-precision machined brass alloy. Female contacts-precision machin- ed high tensile phosphor bronze. Gold flash over nickel plate and gold 0.000050 -(1.25 microns) over nickel plate. Machined of high conductivity copper alloy for both male and female contacts. Gold flash over nickel. Signal Contacts: Signal Contact Plating: Power Contacts: Power Contact Plating: Shielded and High Voltage Contacts: Male contacts-precision machined brass. Female contacts-precision machined high tensile phosphor bronze. Shielded and High Voltage Contact Plating: Shells: Signal contact-gold flash over nickel. Steel or brass with tin plate; zinc plate with dichromate seal, stainless steel passivated. Mounting Spacers and Brackets: Nylon plastic, or brass with tin plate; zinc plate with dichromate seal. Phosphor bronze and beryllium copper with tin plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Push-On Fasteners: Jackscrew Systems: Hoods: Composite and plastic, UL 94V-0, brass or steel with zinc plate and dichromate seal. ELECTRICAL CHARACTERISTICS: SIGNAL CONTACTS 7.5 amperes nominal. 0.008 ohms maximum. 1000 V rm.s. Contact Current Rating: Initial Contact Resistance: Proof Voltage: POWER CONTACTS Contact Current Rating: Initial Contact Resistance: Proof Voltage: SHIELDED CONTACTS Initial Contact Resistance: Nominal Impedance: Insertion Loss: 10, 15, 20, 30 and 40 amperes nominal. 0.005 ohms maximum. 1000 V r.m.s. 0.008 ohms maximum. 50 ohms. -0.46 dB at 1 GHz -1.5 dB at 2 GHz 1.15 average at 1 GHz 1.56 average at 2 GHz Above values measured using frequency domain techniques. VSWR: Proof Voltage: 1000 V r.m.s. HIGH VOLTAGE CONTACTS Flash over Voltage: 3600 V r.m.s. Proof Voltage: 2700 V r.m.s. Initial Contact Resistance: 0.008 ohms maximum. CONNECTOR Insulator Resistance: 5 G ohms. Clearance and Creepage Distance: Working Voltage: 0.039 inch (1.0mm) minimum. 300 V r.m.s. MECHANICAL CHARACTERISTICS: Signal Contacts, Fixed: Contact Retention in Insulator: Resistance to Solder Iron Heat: Signal Contact Terminations: Power Contacts, Removable, Crimp or Solder Termination: Power Contacts, Printed Board Mount: Shielded Contacts, Removable: High Voltage Contacts: Shells: Polarization: Mounting to Angle Brackets: Mounting to Printed Board: Locking Systems: Mechanical Operations, Signal Contacts: Size 20 contacts, male contact-0.040 inch (1.02mm) diameter. CBD Series has open entry design female contacts. CBM Series has closed entry design female contacts. Signal-9 Ibs. (40N). Power, shielded and high voltage-22 ibs (98N). 500F (260C) for 10 seconds duration per IEC 512-6. Solder contacts - 0.042 inch (1.06mm) minimum hole diameter for 20 AWG (0.5 mm?) wire maximum. Straight Printed Board Mount 0.028 inch (0.71mm) diameter. 90 Printed Board Mount 0.028 inch (0.71 mm) diameter. Size 8 contact, male contact 0.142 inch (3.61mm) diameter. Female contact fea- tures Large Surface Area (L.S.A.) closed entry contact design utilizing BeCu mechanical retention member. Male and female contacts have terminations for wire sizes 8, 12 and 16 AWG. Size 8 contact, male contact 0.142 inch (3.61mm) diameter. Printed board termina- tions with 0.078 inch (1.98mm), 0.093 inch (2.36mm) and 0.125 inch (3.18mm) diame- ters. See table of maximum cable sizes for contact termination dimensions. Straight and 90 terminations 0.041 inch (1.04mm) minimum hole diameter. Male shells may be dimpled for EMVESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Jackscrews and riveted fasteners with 0.120 inch (3.05mm) diameter hole, and threaded riveted fasteners with 4-40 threads and nylon inserts. Rapid installation push-on fasteners and threaded posts. Jackscrews. CBD Series, 500 operations, CBM Series, 1,000 operations per IEC 512-5. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: -55C to +125C. 10 days. Positronic Industries, Inc. o ad AiCBD INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS CBM FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Series CBD3W3M00000 CBDSW5M00000 STANDARD SHELL ASSEMBLY M B1 +; r G fF Typ. 0.050 (1.27) +0.010 tt | t T QC___jo Ne m , D1 re c 1 om (6.59) \ 0.120 (3.05) +0.005 @ Mounting hole, 0.036 (0.91) +0.008 - Max. two places 0.120 (3.05) +0.010 0.120 (3.05) 20.005 @ Mounting hole, two places 0.032 (0.81) 0.086 (2.18) 20.005 -0.000 @ 0.154 (3.91) @ Mounting hole available Total diametral float Mounting hole, two places OPTIONAL SHELL ASSEMBLY OPTIONAL SHELL ASSEMBLY WITH UNIVERSAL FLOAT MOUNTS A B B1 c D D1 E G H K M SHELL SIZES 20.015 | +0.005 | +0.005 | 20.005 | +0.005 | +0.005 | +0.015 | 20.010 | +0.010 | +0.005 | +0.010 [SHELL Size? | 1213 0.666 | 0.984 0329 | 0.494 | 0.759 | 0.422 | 0.233 | 0.422 MALE (30.81) (16.92) | (24.99) (8.36) | (12.55) | (19.28) | (10.72) | (5.92) | (10.72) SHELL SIZE 1 1213 0.643 0.984 0.311 0.494 0.759 0.422 0.243 0.429 FEMALE (30.81) | (16.33) (24.99) | (7.90) (12.55) | (19.28) | (10.72) | (6.17) | (10.90) SHELL SIZE 2 1.541 0.994 1,312 0.329 0.494 1.083 0.422 0.233 0.422 MALE (39.14) (25.25) | (33.32) (8.36) | (12.55) | (27.51) | (10.72) | (5.92) | (10.72) SHELL SIZE 2 1.541 9.971 1.3142 0.311 0.494 1,083 0.422 0.243 0.429 FEMALE (39.14) | (24.66) (33.32) | (7.90) (12.55) | (27.51) | (10.72) | (6.17) | (10.90) SHELL SIZE 3 2.088 1.534 1.852 0.329 0.494 1.625 0.422 0.230 0.426 MALE (53.04) (38.96) } (47.04) (8.36) | (12.55) | (41.28) | (10.72) | (5.84) | (10.82) SHELL SIZE 3 2.088 1.611 1.852 0.311 0.494 1.625 0.422 0.243 0.429 FEMALE (53.04) | (38.38) (47.04) | (7.90) (12.55) | (41.28) | (10.72) | (6.17) | (10.90) SHELL SIZE 4 2.729 2.182 2.500 0.329 0.494 2.272 0.422 0.230 0.426 MALE (69.32) (55.42) | (63.50) (8.36) | (12.55) | (57.71) | (10.72) | (5.84) | (10.82) SHELL SIZE 4 2.729 2.159 2.500 0.311 0.494 2.272 0.422 0.243 0.429 FEMALE (69.32) | (54.84) (63.50) | (7.90) (12.55) | (57.71) | (10.72) | (6.17) | (10.90) SHELL SIZE 5 2.635 2.079 2.406 0.441 0.605 2.178 0.534 0.230 0.426 MALE (66.93) (52.81) | (61.11) (11.20) | (15.37) | (55.32) | (13.56) ] (5.84) | (10.82) SHELL SIZE 5 2.635 2.064 2.406 0.423 0.605 2.178 0.534 0.243 0.429 FEMALE (66.93) | (52.43) (61.11) | (10.74) (15.37) | (55.32) | (13.56) | (6.17) | (10.90) SHELL SIZE 6 2.729 2.212 2.500 0.503 0.668 2.302 0.596 0.230 0.426 MALE (69.32) (56.18) | (63.50) (12.78) | (16.97) | (58.47) | (15.14) | (5.84) | (10.82) SHELL SIZE 6 2.729 2.189 2,500 0.485 0.668 2.302 0.596 0.243 0.429 FEMALE (69.32) | (55.60) (63.50) | (12.32) (16.97) | (58.47) | (15.14) | (6.17) | (10.90) . DIMENSIONS ARE IN INCHES (MILLIMETERS) 3 al Positronic ALL DIMENSIONS SUBJECT TO CHANGE A . eee eee eee eee eee eee ee ee eee Industries, Inc.CBD or} '/ Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS SOLDER CONNECTOR 20 AWG max. (0.5 mme) Fixed female JS 0.125 For solder contacts, ; specify code 2 in step 4 (3.18) 0.345 of ordering information. (8.76) Typical part number: CBD7W2M200TO Fixed female jackscrew Fixed male jackscrew Fixed male and femaie polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical part number: CBD7W2M200T60 STRAIGHT PRINTED BOARD MOUNT CONNECTOR For straight printed board mount contacts, specify code no. in step 4 of ordering information. CODE Swaged spacer with Fixed female jackscrews NUMBER DS push-on fastener, phosphor bronze. nr 0.010 Min. UL (0.25) _t 35 0.078 fa OT (1.98) eq a 0.250 0.170 } (6.35) 36 0.093 (4.32) 0.028 @ De (2.36) (0.71) 0.125 . 37 (3.18) Typical part number: CBD17W2F35S60T2X DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE CBD17W2F200E0 with FS4008D contacts. CBD17W2M55B30T20 Positronic Ain Industries, Inc. 4CBD CBM Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS PRINTED BOARD MOUNTED POWER CONTACTS STRAIGHT PRINTED BOARD MOUNT POWER CONTACTS Straight printed board mount power contacts are mounted in connector when ordered. [ein (4.32) *FEMALE CLOSED ENTRY, L.S.A. PART | 4g [CURRENT NUMBER RATING Fosast4p] (Ga) _| 15 Amps. FDS43120] (59) | 20. Amps. FDS4310D] (fg) | 30 Amps. Material - High conductivity copper alloy. Plating - Gold flash over nickel. MALE } i 0.142 A @ a) (3.61) FF h 0.634 (16.10) PART AG CURREN NUMBER RATING 0.078 paosssi4p (1.98) 15 Amps. 0.094 2D (2.39) 20 Amps. 0.125 MDS4310D (3.18) 30 Amps. 90 PRINTED BOARD MOUNT POWER CONTACTS 90 printed board mount power contacts are mounted in connector when ordered. Material - High conductivity copper alloy. Plating - Gold flash over nickel. DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE 5 |e Positronic in Industries, Inc. A [+ A Fn 0.142 Es: (361) *FEMALE MALE || CLOSED ENTRY, L.S.A. c lok lal. PART SHELL | BEND PART SHELL | BEND NUMBER |CURRENT| AREF.| BS c size | CODE NUMBER [CURRENT] A REF.| BO c size. | CODE 0.580 | 0.078 | 0.339 0.580 | 0.078 | 0.339 FRT4314D [15 Amps (14.73) | (1.98) | 61) 1,2,3&4] 55 MRT4314D}, 15 Amps (14.73) | (4.98) | (8.61) 1,2,3&4] 55 692 | 0.078 | 0.451 0.692 | 0.078 | 0.451 FRT44144D] 15 Amps (17.58) | (4.98) | (11.48) 5 55 MRT4414D] 15 Amps (17.58) | (4.98) | (41.48) 5 55 0.661 | 0.078 | 0.42 0.661 | 0.078 | 0.420 FRT4714D]_ 15 Amps (16.79) | (1.98) | (10.67) 1,2,3&4] 75 MRT4714D] 15 Amps (16.73) | (1.98) | (10.67) 1,2,3&84] 75 0.773 | 0.078 | 0.520 0.773 | 0.078 | 0.520 FRT4814D9_ 15 Amps (19.63) | (4.98) | (13.21) 5 75 MRT4814D] 15 Amps (19.63) | (1.98) | (13.21) 5 75 1.036 | 0.125 | 0.81 1.036 | 0.125 | 0.810 FRT4310D | 30 Amps (26.31) | (3.18) | (2057) 1,2,3&4] 57 MRT4310Df 30 Amps (26.31) | (3.18) | (20.57) 1,2,3&4] 57 1.036 | 0.125 | 0.810 1.036 | 0.125 | 0. FRT4410D} 30 Amps (26.31) | (3.18) | @0.87) 5 57 MRT4410D]_ 30 Amps (26.31) | (3.18) | 2057) 5 57 *Note: Female power contacts feature Large Surface Area (L.S.A.) closed entry contact design which provides maximum mat- ing surfaces between male and female contacts and reduced contact resistance during operation.CBD INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS CBM FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Series 90 PRINTED BOARD MOUNT CONNECTOR q Ce WITH 0.125 (3.18) @ POWER CONTACTS 0,220 (5.59) Max. | CODE 5 AND 57, 0.283 (7.19) CONTACT EXTENSION ) | (30 amps nominal) . PLASTIC MOUNTING L CBD00*R7000 0.283 (7.19) CONTACT EXTENSION BRACKET AVAILABLE Specify code B8 in step 5 SHELL SIZE A B c D of ordering information. 0.060 (1.52) R. 240 1.204 | 0.984 | 0.339 | 0.283 ots SHELL SIZE 1 } (39 58) | (24.99) | (8.61) | (7.19) ooo tt te A 1.532 | 1.312 | 0.339 | 0.283 0.120 (3.05) @ (2:29) 4 female SHELL SIZE 2 120 (3.05) O7 screws +0.008 (38.91) | (33.92) | (8.61) | (7.19) 0.129 b B 2.072 | 1.852 | 0.339 | 0.283 . 4 L852 | 0.339 t SHELL SIZE 3 J (55 63) | (47.04) | (8.61) | (7.19) r 4 2.720 | 2.500 | 0.339 283 0.149 SHELL SIZE 4 } (69 99) | (63.50) | (8.61) | (7.19) (3.78) 2.626 | 2.406 | 0.395 | 0.283 J SHELL SIZE5 J 66 70) | (61.11) | (10.03) | (7.19) osteo I (@ L - (20.57) ee 2 ; 0.810 0.112 (2.84) yp ~ Specify code 5 (20.57) 0.112 (2.84) Typ. | be or 57 in step 4 of D N ordering information. lumbering shown is rear view of be D 0.112 (2.84) Typ. male and face view of female. / ( A2 47 26 5 4 39 02 4 f \ 5 14 3 q2]) 11 ff 10 8 8 z t z Ls a 3 3 ( Push-on fastener, i | . " 0.125 (3.18) @ Typical part number: 0.170 (4.32) beryllium copper. J Typical part number: CBD17W2M57R7NT20 Nominal P*~ 0.028 (0.71) B CBD36W4F57R7NT2X 4 c 90 PRINTED BOARD MOUNT CONNECTOR 0.220 (5.59) Max. nal WITH 0.078 (1.98) @ POWER CONTACTS - CODE 5 AND 55, 0.283 (7.19) CONTACT EXTENSION (15 amps nominal) n PLASTIC MOUNTING CBD00*R7000 0.283 (7.19) CONTACT EXTENSION BRACKET AVAILABLE Specify code B8 in step 5 SHELL SIZE A B Cc D of ordering information. 0.060 (1.52) R. qo 240 S-= "FA . SHELL size1 | 2204 | 0.984 | 9.339 | 0.283 Eee 6.10) Fixed female A (30.58) | (24.99) | (8.61) | (7.19) 0.090 Fe jackscrews +0.008 1532 | 1312 | 0.339 | 0.28 0.120 (3.05) @ , (2:29) B SHELL SIZE 2 J (38 91) | (33.32) | (8.61) | (7.19) oi 2.072 | 1.852 | 0.339 | 0.283 4 SHELL SIZE 3 J (<5 63) | (47.04) | (8.61) | (7.19) = 0.149 2.720 | 2,500 | 0.339 | 0.283 4.78 SHELL SIZE 4 1 69 09) | (63.50) | (8.61) | (7.19) (3.78) 2.626 | 2.406 | 0.395 | 0.283 7 SHELL SIZE 5 9 66 70) | (61.11) | (10.03) | (7.19) (tas) 0.339 0.112 (2.84) Typ. | be Specify code 5 (8.61 0.112 (2.84) Typ L or 55 in step 4 of D ordering information. Numbering shown is rear view of 0.112 (2.84) =D P male and face view of female. / Typ. ol AD oT 6 oS a os ot ta 15 P14) ]13 | [92 P41 10] 9 3 Ay q Push-on fastener, 4 L Typical part number: beryllium copper. AL 0.078 (1.98) O Typical part number: CBD17W2M55R7NT20 0.170 (4.32) 0.028 (0.71) @ CBD36W4F55R7NT2X DIMENSIONS ARE IN INCHES (MILLIMETERS) Nominal ALL DIMENSIONS SUBJECT TO CHANGE rs Positronic a} Industries, Inc.CBD INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS CBM FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Series METRIC SYSTEM 90 PRINTED BOARD MOUNT CONNECTOR WITH 0.078 (1.98) @ POWER CONTACTS CODE 7 AND 75, 0.370 (9.40) CONTACT EXTENSION (15 amps nominal) 0.125 (3.18) @ TYP. 9.220 (5.59) Max. PLASTIC MOUNTING BRACKET AVAILABLE Specify code B8 in step 5 CBD00*R7000 0.370 (9.40) CONTACT EXTENSION of ordering information. SHELL SIZE A B c D 0.060 (1.52) R. o.240 Pe (6.10 0.090 16-10) SHELL size 1 | 1204 | 0.984 | 0.420 | 0.370 (2.29) +0.008' (30.58) | (24.99) | (10.67) | (9.40) 0.120 (3.05) @ 0 123.4 Fixed female 1.532 | 1.312 | 0.420 | 0.370 (3.12) [I jackscrews SHELL SIZE 2 J 5 91) | (33.32) | (10.67) | (9.40) #4 2.072 | 1852 | 0.42 0.370 A | SHELL SIZE 3 (52.63) | (47.04) | (10.67) | (9.40) (3.78) y 2.720 | 2.500 | 0.420 | 0.370 SHELL SIZE 4 J 65 09) | (63.50) | (10.67) | (9.40) 2.626 | 2.406 | 0.470 | 0.370 SHELL SIZE 5 7 6670) | (61.11) | (11.94) | (9-40) 0520 13.21 0.100 (2.54) Tp | ra ) k- 0.100 (2.54) Typ.e] be ify code 7 SP eety step Aot 1067) Numbering shown is rear view he D ordering information. . ( D 0.100 (2.54) of male and face view of rare r Typ. c f- ) , if 8 (A) a HEL Typical part number: Rae 32) _. L. 0.078 (1.98) @ Typical part number: W2M75RA70T20 CBD36W4M75R70T2 CBD17W2M75R70 0.024 (0.61) 0 3 0 0.128 (318) 9 METRIC SYSTEM 90 PRINTED BOARD MOUNT CONNECTOR TYP. 9,200 (6. a> ~ WITH 0.125 (3.18) @ POWER CONTACTS Max. CODE 7 AND 77, 0.370 (9.40) CONTACT EXTENSION (30 amps nominal) PLASTIC MOUNTING CBD00*R7000 0.370 (9,40) CONTACT EXTENSION BRACKET AVAILABLE Specify code B8 in step 5 of ordering information. SHELL SIZE A c D 0.060 (1.52) 5 sytoe 40 1.204 | 0, 0.420 | 0.370 EI (6.10) SHELL SIZE1 | 3558) | (ou. (10.67) | (9-40) 0.090... [. +0. 08 5: B 0.984 $ (24.99) 0.120 (3.05) @, #29) Fixed female SHELL SIZE 2 1532 | 1.312 | 0.420 370 0.123 be jackscrews (38.91) | (33.32) | (10.67) | (9.40) (3.12) q L 2072 | 1.852 | 0.420 | 0.370 SHELL SIZE 3 65 63) | (47.04) | (10.67) | @.40) 0.149) 2.720 | 2.500 | 0.420 | 0.370 (3.78) SHELL SIZE 4 1 69 09) | (63.50) | (10.67) | (9.40) 2.626 | 2406 | 0.470 | 0.370 oto SHELL SIZES | (66.70) | (61.11) | (11.94) | (9.40) (20.57) 0.100 (2.54) yp he 0.100 (2.54) Typ.| Numbering shown is rear view Specify code 7 0.810 (20.57) of male and face view of female. or 77 in step 4 of D be! 0.100 (2.54) ordering information. Typ. jt err sli fefh tai) bed fot | = L 0.170 (4.32) JL. + Le 0.125 (3.18) @ Nominal 0.024 (0.61) & Typical part number: Typical part number: CBD17W2M77R70T20 CBD36W4M77R70T20 DIMENSIONS ARE IN INCHES (MILLIMETERS) . . ALL DIMENSIONS SUBJECT TO CHANGE 7 Positronic P Industries, Inc.INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS SHELL SIZE 6 90 PRINTED BOARD MOUNT CONNECTOR WITH 0.078 (1.98) @ POWER CONTACTS CODE 5 AND 55, 0.283 (7.19) CONTACT EXTENSION CONNECTOR VARIANT 46W4 (15 amps nominal) Fixed female jackscrews ' 0.451(11.46) Shell size 6 connector | | 2.720 0.507(12.88) (69.09) 0.283(7.19)-Specify ; ; ; code 5 or 55 in step 4 0.112(2.84) Typ. Numbering shown is rear view of ordering information il \of male and face view of female 3 : 1 {| El g g i _| EB .170(4. Typical part number: Naam? Push-on fastener, [- lL 0.078(1.98) @ CBD46W4M55R7NT20 beryllium copper 0.028(0.71) @ SHELL SIZE 6 90 PRINTED BOARD MOUNT CONNECTOR WITH 0.125 (3.18) @ POWER CONTACTS CODE 5 OR 57, 0.283 (7.19) CONTACT EXTENSION CONNECTOR VARIANT 46w4 (30 amps nominal) ooo eee 1 0.451(11.46) Shell size 6 connector ATTEN +0.008 2.720 (69.09) oe ieee eety code 5 0.112(2.84) Typ. Numbering shown is rear view of oo : male and face view of female ordering information EE | TE .170(4.32 J Typical part number: Nanas ) Push-on fastener, I i 0.125(3.18) @ CBD46W4M57R7NT20 beryllium copper 0.028(0.71) @ DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE . . 7a Positronic as Industries, Inc.CBD CBM Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN WITH 0.078 (1.98) @, 0.094 (2.39) @ AND 0.125 (3.18) @ POWER CONTACTS Hole identification shown for male connector, use mirror image for female connector. Mount connector with mating face positioned to follow direction of arrow. 0.218 (5.54) re 0.270 (6.86) TYP. -+ 0.108 (2.74) TYP. y 0.162 (4.11) TYR. f y. 0.270 (6.86) TYP | f- 0.054 wannre| | y 0.162 (4.11) TYP. te at |e =a ai Azl ag Ate tolgz_lacft \ At f_, + @=s 3 OF @-+-e-6-e oe OTS OO | | 0.492 (12.50) TYP. |__| 0.656 (16.66) TYP. be 0.108 (2.74) TYP, o| E 0.216 (5.49) TYP. 5wt1 3W3 0.656 (16.66) TYP. 0.656 (16.66) TYP. 7W2 11W1 0.108 (2.74) TYP 0.268 (6.81) TYP. 0.216 (5.49) 0.108 (2.74) TYP. o4 0.034 (0.86) 0.162 (4.11) - 0.054 (1.37) TYP. af x 5 4 @ree' 4 eo Q) Ng A fre @o AS gts le At 6 [ 0.570 (14.48) TYP. [0.306 (7.74 I 0.306 (7.77) |_ 0.926 (23.52) TYR | 0.570 (14.48) TYP. TE [ 0.570 (14.48) TYP. 5W5 [ 0.926 (23.52) TYP. [ 0.926 (23.52) TYP. 9w4 13W3 0.650 (16.51) 0.109 (2.77) TYP. 0.250 (6.35) TYR 0.109 (2.77) TYP. fe 7 0.218 (5.54) TYP. 1 0.150 (3.81) l 1 7 AZ 1 Of OSES Opie seer ore ne lata 6 x h- 0.054 (1.37) TYP. x | LC 0.163 (4.14) TYP. {_| 0.600 (15.24) p 0.544 (13.82) TYP. 0.926 (23.52) TYP. 7 0.900 (22.86) TYP. t 0.926 (23.52) TYP. 21W1 i 1.250 (31.75) TYP. 17W2 0.707 (17.96) 0.109 (2.77) TYP. 0.275 (6.99) TYP. 0.652 (16.56) 0.343 (8.71) As, a6." 11 0.109 (2.77) TYP. -~ b- 8ws 0.893 (22.68) TYP. ] 0.618 (15.70) TYR, 4 0.109 (2.77) TYP. 4 [ 6 e 109 (2.77) TYP. 203 (30.56) TYP. Y A : Az, AS. At 4 AL a2 th St i x e- o-e-@ vs so oeeF eee eer e-eO oes peetooe Be Pe 0.092 (2.34) ~* mol te 0.055 (1.40) TYP. . ~~] 0.055 (1.40) TYR - 0.265 (6.73) TYP. 0.618 (15.70) t 1.250 (31.75) TYP. t 1.250 (31.75) TYP. t 1.250 (31.75) TYP. o1WAA 13W6 17W5 t 0.893 (22.68) TYP. te wl 0.893 (22.68) TYP. t-) 0.109 (2.77) TYP. f Y 0.109 (2.77) TYR =) fe Y 0.270 (6.86) TYP. -- Y Ale Az eevesooves! As _wetveccecssscccdt Az A a" eee a @ee pesvssesssge OTe reregereees Te @ ostacaa9 beet x aa le 0.055 (1.40) TYP. x | ke 0.055 (1.40) TYP. tr 0. i 0.618 (15.70) t 1.250 (31.75) TYP. 1: 1 1.250 (31.75) TYP. 25W3 27W2 24W7 DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE 0.810 (20.57) TYP. J 0.810 (20.57) 4 0.055 (1.40) TYP. --4 x 0-540 (13.72) 0.109 (2.77) TYP. -| x 0.109, (2.77) TYP. + eit Al Aig 'e Y ot t z Mocouees Day a f* 1 0% eels eeceutes FE Ferree eeotense,, le z 0.270 (6.8 x ty 1 0.055 (1.40) TYP. T 0.540 (13.72) 1.203 (30.56) TYP. CODE 3,35 1.203 (30.56) TYP. 43W2 NO. a37 | 2&55 | 7&75 36W4 0.810 (20.57) __ x 0.112 112 | 0.100 0.900 (22.66) ne 0.109 (2.77) TYP (2.84) | (2.84) | (2.54) 650 (16.51) TYP. ] [* agpiaces TP a, "7 eeoeooenee @eeasesn Y 0.056 0.056 0. 30 80>. To LU esueg : eeece x f (1.42) | (1.42) | (1.27) slots 2 eb] 4, cy a 6 o100 Toni Ton 3 L 0.060 (1.52) TYR. TYP. x 0.055 (1.40) TYP. A oe =e 0.100 lk 0.120 (3.05) TYP. 38 PLACES 1.203 (30.56) TYP. (2.54) | (2.84) (2.54) L_ 1.250 (31.75) TYP. 47W1 B 0.050 0.056 0.050 46W4 (1.27) (1.42) (1.27) Suggest 0.045 (1.14) @ hole for signal contact termination positions. Suggest 0.098 (2.49) @ hole for 0.078 (1.98) @ power contact termination positions. Suggest 0.114 (2.90) @ hole for 0.094 (2.39) @ power contact termination positions. Suggest 0.145 (3.68) hole for 0.125 (3.18) @ power contact termination positions. . : Suggest 0.123 +0.003 (3.12) @ hole for mounting connector with push-on fasteners. Positronic A) Industries, Inc.CBD CBM Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD CONTACT HOLE PATTERN WITH 0.125 (3.18) @ POWER CONTACTS Hole identification shown for male connector, use mirror image for female connector. Mount connector with mating face positioned to follow direction of arrow. 0.218 (5.54) TYP. 0.270 (6.86) TYP. 4 oe ee TYP al te 0.162 (4.11) TYP. 0.270 mentee 0.054 (1 37) TYP. +l ate (4.11) TYP. | r x eo Y o6_ a | Jet . 4 * @ Lil 0+ oles | din 4 vt, _ o-+ @ Dee Se tO Preise (12.50) TYP. |---| 0.656 (16.66) TYP. TL Le 3 weerd ve [Py box (6.49) TYP. CBD 5W1 CBD 3w3 0.856 (16.66) TYP. 0.656 (16.66) TYP. 0.108 (2.74) TYP. 3 PLACES | Oa ayo . opp iwi 0.268 (6.81) TYP. 2 PLACES 0.216 (5.49) 4 ~~) 0.108 (2.74) TYP. 8 PLACES 0.084 e. 0.162 (4.11) 0.054 (1.37) TYP | At Az, Aa A aK ae e*ee;,e _ e-;_e* @ ~ i | i ize 3 A x DS elee cll A 7 oe; f cars eos q 0.570 (14.48) TYP. --| + 0,306 (7.77) {0.306 (7.77) 0.926 (23.52) TYP. 0.570 (14.48) TYP. 0.570 (14.48) TYP. CBD 5Ws 0.926 (23.52) TYP. | 0.926 (23.52) TYP. CBD 9w4 0.650 (16.51) 0.109 (2.77) TYP. 16 PLACES 0.250 (6.35) TYP. 3 PLACES 0.109 (2.77) TYP. 13 PLACES -+ 0.218 (5.54) TYP. 0.150 (3.81) At AZ, AL Atg AZ AS. Ad Ag. ,@ e_( , * ; e-ee"e'eee'e om Ll wecdesd A @ineees | sooo dt, a LN A ee oO rare ees tee TOT + + aT K~ 0.054 (1.37) TYP. | E 0.163 (4.14) TYP. 0.600 (15.24) 0.544 (13.82) TYP. 0.926 (23.52) TYP. 0.900 (22.86) TYP. 0.926 (23.52) TYP. CBD 21W1 |___ 1.250 (31.75) TYP. CBD 17W2 CBD 8W8 0.707 (17.96) 0.275 (6.99) TYP. 3 PLACES 0.893 (22.68) TYP. _] 0.109 (2.77) TYP. 5 PLACES L- 0.343 (8.71) 0.618 (15.70) TYP. _| 0.652 (16.56) 0.109 (2.77) TYP. 10 PLACES} 0.109 (2.77) TYP. 15 PLACES _J| Al A3. AG, Al, Al. A, Ady, AS, At Az ee* ee e'ere t ee e*ee' s_ ee eel. LN 11 eo ttt cee of a XE eee ae Pag @- @ O- ) @ tT 7yeee Fy eee tat j 7 es be 0.092 (2.34) k 0.055 (1.40) TYP. _-| G.055 (1.40) TYP. 2 eee E28) TYP. 0.618 (15.70) 1.250 (31.75) TYP. 1.250 (31.75) TYP. 1.250 (31.75) TYP. CBD 21WA4 CBD 13W6 CBD 17W5 0.893 (22.68) TYP. + 0.893 (22.68) TYP. _, 0.109 (2.77) TYP. 20 PLACES _, 0.109 (2.77) TYP. 23-+| op (6.86) TYP. AL. A2 AL PLACES A2 6P CES 7. ne: ee se | eo: "ee'e"e'e"e ot tt te crccsvece dt @ tte wcavccsseve di * *} ' Teecees 7 Tis OFF ae eee eas TF po ae -| f+ 0.055 (1.40) TYP. | ke 0.055 (1.40) TYP. t 0.109 (2. 77) "TYP. 16 PLACES 0.618 (15.70) 1.250 (31.75) TYP. 1.203 (30.56) TYP. | 4.250 (31.75) TYP. CBD 25W3 CBD 27W2 DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE CBD 24w7 0.810 (20.57) TYR 4 0.810 (20.57) 4 0.055 (1.40) TYP. | 1 7 0.540 (13.72) _] 0.109 (2.77) TYP. 29 PLACES_.. tC 0.109 (2.77) TYP. 37 PLACES - r | r* Aig Ai { Aw Az } nt oee. 8 L a ol weeeeeee ets AO Or B y [past tesersses ceecn l ae eeeesessccctecent le 0.270 (6.86)" | 0.055 (1.40) TYP. 0.540 (13.72) es 1.203 (30.56) TYP. 1.203 (30.56) TYP. CBD 43W2 CBD 36W4 CODE 0.900 (22.86) TYP. 4 0.810 (20.57) 4 NO. A B c X Y 0.650 (16.51) TYP. J 0.109 (2.77) TYP. re PLACES 0.471 | 0.415 | 0.359 | 0.112 | 0.056 | _@@.,. 70 @ {x l ;e 5 &57 c ess. Pe talline @eesessecensees (11.96) | (10.54) | (9.12) | (2.84) |] (1.42) @ eee Las 0 t gees Beale a Bea an O=F per eeceasleeecccson, ss : : | + 0.120 (3.05) TYP. 38 PLACES 1.208 (30.56) TYP. 1.250 (31.75) TYP. A7W1 Suggest 0.045 (1.14) @ hole for signal contact termination positions. 46W4 Suggest 0.145 (3.68) & hole for power contact termination positions. Suggest 0.12320.003 (3.12) @ hole for mounting connector with push-on fasteners. Positronic 10 P. Ai Industries, Inc.CBD 035} 1) Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE- D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS PRINTED BOARD MOUNTED SHIELDED CONTACTS STRAIGHT PRINTED BOARD MOUNT SHIELDED CONTACTS Straight printed board mount shielded contacts are mounted in connector when ordered. A ] 0.040 A 0.156 @ 0.156 | rT (3.96) r B [ne B (3.96) 0.200 0.200 5 (5.08) + (5.08) _ bose 3 0.037 (0.94) FEMALE (3.86) MALE Suggest 0.045 (1.14) @ hole Across points 0.200 (5.08) | PARTNO.| A B c PARTNO.| A B c ot 0.481 0.025 | 0.181 0.489 | 0.025 | 0.181 FDS4201D 7 (15 20) | (0.64) | (4.60) | JMPS4201D} (15 45) | (0.64) | (4.60) o100 ft (2.54) FDS4201D and MDS4201D Contact hole pattern Material - Copper alloy with PTFE teflon insulator. Signal contact plating -0.000030 inch (0.751) gold over nickel or 0.000050 inch (1.25p)) gold over nickel. Contact body plating -Gold flash over nickel. *Technical characteristics are listed on page 17. 90 PRINTED BOARD MOUNT SHIELDED CONTACTS 90 printed board mount shielded contacts are mounted in connector when ordered. A _ a A + 1! 1 B P 1 4 FEMALE MALE t _f D oan 0.162 (4.11) 0.040 0.152 10) | (1.02) (3.26) f Suggest 0.045 (1.14) @ hole c _ c 0.037 (0.94) Across points | 0.200 (5.08) PARTNO.| A B c D PARTNO.| A B c D ot 0.827 | 0.240 | 0.259 | 0.470 0.829 | 0.240 | 0.253 | 0.470 FRT4201D 7 (5101) | (6.10) | (6.58) | (11.94) MRT4201DF 57/06) | (6.10) | (6.43) | (11.94) Le) 0.100 | (2.54) FRT4201D and MRT4201D Contact hole pattern Material - Copper alloy with PTFE teflon insulator. Signal contact plating -0.000030 inch (0.75!) gold over nickel or 0.000050 inch (1.25p) gold over nickel. Contact body plating -Gold flash over nickel. DIMENSIONS ARE IN INCHES (MILLIMETERS) *Technical characteristics are listed on page 17. ALL DIMENSIONS SUBJECT TO CHANGE Positronic Industries, Inc. 11 eeCBD INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS CBM FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Series STRAIGHT PRINTED BOARD MOUNT CONNECTOR WITH SHIELDED CONTACTS CODE 65, CONNECTOR WITH FDS4201D OR MDS4201D CONTACTS Fixed female jackscrews m4 a 0.250 (6.35) EOF 0.170 (4.32 ( (0.71) B Push-on fastener, phosphor bronze 0.156 (3.96) Numbering shown is rear view 0.025 (0.64) | of male and face view of female. I 0.028 (0.71) @ ERIE=4 f 0.037 (0.94) Across points Typical part number: CBD17W2M65S60T20 90 PRINTED BOARD MOUNT CONNECTOR WITH SHIELDED CONTACTS CODE 85, CONNECTOR WITH FRT4201D OR MRT4201D CONTACTS CBD00850000 0.283 (7.19) CONTACT EXTENSION xe SHELL SIZE | A B D SHELL SIZE1 | Jacq | casa | Gen | ia jackscrews | 090) sHet siZe2 | as.or) | (ace | (st) | (719) SHELL SIZE 3 2.09) (47.04) bet) 19) SHELL SIZE 4 | 2555) | 350) | een | Gin (66.70) | (61.11) } (10.03) | (13.84) 9.09 "| __1 SHELL SIZE 5 620 2.406 0.395 0.545 c Numbering shown is rear view of male and face view of female. 0.156 (3.96) 0.170 (4.32) Nominal D - specify code 85 | in step 4 of ordering +4 LL 0.112 (2.84) Typ. information | 0.470 (11.94) Push-on fastener, Typical part number: beryllium copper CBD17W2M85R7NT20 (es TTT iz 0.028 (0.71 { a. B14 oles, : |_| 0.470 (11.94) 0.028 5, 0.037 (0.94) 0,112 (2.84) r D - specify code 85 in Across points Typ. step 4 of ordering 2 places information Typical part number: CBD36W4M85R7NT20 Note: Sheil size 5 connectors are supplied inverted when ordered with 90 printed board mount shielded contacts. DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE wn) Positronic 42 i Industries, Inc.CBD CBM Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS STRAIGHT PRINTED BOARD MOUNT CONTACT HOLE PATTERN WITH FDS4201D AND MDS4201D SHIELDED CONTACTS Hole identification shown is for male connector, use mirror image for female connector. 0.218 (5.54) Typ. 0.162 (4.11) Typ. ij) 0.200 (5.08) -@ 0,100 (2.54) 0.268 (6.81) Typ. 0.034 (0.86) tt] 3yo. 0.270 (6.86) Typ. 0.112 (2.84), 100 @. 54) 1A * e ez eat Aly = 4 056 (1. om aa! * 2 0.492 (12.50) Typ. qT e * s 3W3 0.216 (5.49) _. 0.162 (4.11) * [2200 6.08), . .. Aa, Ay D+- $ +O SOD lb oess (16.66) Typ. 54) AB) 0.108 (2.74) Typ 0.054 (1.37) Typ. tr "ry _| @ ot, 58 ee 7W2 0.108 (2.74) Typ. 3 112 (2. ep 0.054 (1.37) Typ.) ot? #5, oiteat ~ ea 0.056 aay? I 0.270 (6.86) Typ. 0.656 (16.66) Typ. 0.108 (2.74) Typ. ee 5.08} a ty @+@ 0.112 (2.84) eH ees" ir 0. 108 (2.74) Typ. al | (itt) Te. pone ee) oe O= mi t 0. 100 (2.54) th } 0.056 (1.42) 0.216 (5.49) Typ. 0.656 (16.66) Typ. 11W1 tr 0.109 (2.77) Typ. 0.054 (1.37) Typ. ee i p 0112 2.84) 4 0.200 (5.08) -@ Ne 0.570 0.100 | o ee o chee (1. 42)] ne (2.54)} |__. 5W5 0.272 (6.91) Typ. 0.100 (2.54) (14.48) TYP 0.926 (23.52) Typ. -_>+ e [ 0.306 (7.77) a (2.54) 9Ww4 0.109 (2.77) Typ. 0.650 (16.51) 4 0.218 (5.54) Typ. + Al -- 0.150 (3.81) + AL AZ AS Ad e e e 0.112 (2.84) (6 08) jes @ 1 pes 0.200 (6:08) == 0.100 (2. 54) eoes NW 21W1 0.343 (8.71) 0.200 9.409 @ 77) Typ. [so .08) 0.100 wT Me eee e eeee 7 Te 0.086 (1 42) 0.100 0.163 (4.14) (2.54) 0.926 (23.52) Typ. 8Ww8s 0.109 (2.77) Typ. 0.055 (1.40) Typ.+| Al, Az s s 0.275 (6.99) Typ. a 112 (2.84) Os 0. = (1.42) /- 0.055 (1.40) Typ. T 0.618 (15.70) 1 woes eee eo rl ot ra SS OS 2@ e + 0.570 (14.48} Typ. 0.926 (23.52) Typ. Loy as, ay Ag { 0.600 (15.24) 1 0.900 (22.86) Typ. 1.250 (31.75) Typ. LE I~ 0.306 (7.77) eee ss "1056 | qi alt [ 0.544 (13.82) Typ. . I 0.570 (14.48) Typ. I 0.926 (23.52) Typ. 13W3 0.926 (23.52) Typ. 17W2 0.707 (17.96) 0.652 (16.56) AB Aa . e 0.200 (5.08) Loe 0.250 (6.35) Typ. At AZ e * ie J 0.100 (2.54) es dll +e . 0.109 (2.77) Typ. 9.142 (2.84) ss=o=1 "0. 086 (1.42) 0,092 (2.34) 0.265 (6.73) Typ. 1.250 (31.75) Typ. 13W6 0.109 (2.77) Typ. ~ 0.200 (5.08) 0.055 (1.40) Typ. +} got 1 ~ = Lees ITE I 3 Ay ooeoe eeooe Hyp. | 0.618 (15.70) 4) [ 0.893 (22.68) Typ. 12 17W5 1.250 (31.75) Typ. 21WA4 1.250 (31.75) Typ. TATTE] 0.109 (2.77) Typ. J fr oeeceee ae 0.112 (2.84) AS au". o 0.056. 0.618 (15.70) (1.42) 0.893 (22.68) Typ. 1.205 (31.75) Typ. 0.816 (20.57) Typ. 0.200 ee 0.100 an 0.109 (2.77) Typ. +} 0.055 (1.40) Typ. + o 112 (2.84) r Lenaee leccvee eeeese 4 0.056 (1.42) L 0.893 (22.68) Typ. 4.250 (81.75) Typ. 27W2 Leese eel [% Shkn 0.270 (6.86) Typ. 0.112 (2. oh r Aa, MAL ABS OA Detects eevcesen 24W7 0.810 (20.57) _, al 0.056 (1.42) 0.109 (2.77) Typ. 1.203 (30.56) Typ. 0.200 (5.08) 0.055 (1.40) Typ. - tr 0.224 (5.69) [. eee as | aot Fe, ot e eesneeoes 2 0.112 a lk 0.270 (6.86) (2.84) 0.540 (13.72) | 1.203 (30.56) Typ. 36W4 0.810 (20.57) 4 0.200 (5.08) 0.200 (5.08) ae 0.120 (3.05) Typ. rc a3) 0.540 (13.72) TS 100 (2.54 0.055 (1.40) Typ. 1 100 (2.54 J [ee 66 b (2.54) [ (2.54) 0.060 (1.52) Typ. [I 2100 (2.54) Typ. peceseene et seeccoce eeseed a, % ween 00 0 eA = @= a 109 oo erect 8 eevee 0.112 ah __9 0.055 =O - (1.40) Typ. (1.42) 0.109 (2.77) Typ. so @eaeeeane 7s (2.84) | 0.224 (5.69) | ee * oO, ose| * ! (1.42) see eee tee *42 0.050 t+ (16.51) Typ. (1.27) al 0.109 (2.77) Typ. 1.203 (30.56) Typ. 0.900 (22.86) Typ. 1.203 (30.56) Typ. 47W1 I 1.250 (31.75) Typ. 43W2 46w4 Suggest 0.045 (1.14) @ hole for signal contact termination position. Suggest 0.12320.003 (3.12) @ hole for mounting connector with push-on fasteners. DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE Positronic Industries, Inc. 13(07 5] B) CBM Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD MOUNT CONTACT HOLE PATTERN WITH FRT4201D AND MRT4201D SHIELDED CONTACTS Hole identification shown is for male connector, use mirror image for female connector. Mount connector with mating face positioned to follow direction of arrow. 0.218 (5.54) Typ. 0.200 (5.08) 0.200 (5.08) | + 0.108 (2.74) Typ. 200 (5.08) [> 9.108 (2.74) Typ. 162 2 (4.11) TP. 5 0.112 (2.84) 0.270 i [oss (1. i ls ag 0-112 (2.84) [arene (4.11) Typ. = af 0.112 wal 0.200 (5.08) ES =" t | roto : fo et tego %; * 4, 0.100 (2.54) TPP 0.056 (1 eal T 0.100} | 0.100 (2.54) * 0.056 (1 wat T orp iz 0.056 (1 ol 0.131 (3.33) |___| 492 (2.54) |, 656 (16.66) Typ. = bo270 (6.86) Typ. (2.54) 0.216 (5.49) Typ. (12.50) Typ. 0.131 (3.33) 0.131 (3.33) I 0.656 (16.66) Typ. 0.656 (16.66) Typ. 5W1 0.131 (3.33) 7We 111 0,108 0.268 (6.81) Typ. 9.200 (5.08) | 216 (5.49) 0.108 (2.74) Typ. (2.74) Typ. 4} 0. 2150 oa r 0.109 (2.77) Typ. 0.034 (0.86) a ' 0.131 (3.33) ra] se (4. oy E 112 (2. 0.064 (1.37) Be | (3.33) 4 | 9.054 229 ony an Typ. ,, one eee 84) e Ls + * a] he As : @ : : x : Po | i b=: iL 7 oS : : o aay lS _ ee = m7 eeeees 0.100 (2.54) ose (1.42)+ F " 0-100 (2.54) 0.056 (1 os 0.570 (14.48) Typ. || 0.306 (7.77) 0.306 (7.77) _ 0.544 (13.82) Typ. 0.926 (23.52) Typ. t 0.570 (14.48) Typ. 0.570 (14.48) Typ. 0.926 (23.52) Typ. 5W5 + 0.926 (23.52) Typ. |. 0.926 (23.52) Typ. 17we t 9w4 13W3 0.100 (2.54 0.109 (2.77) Typ. 100 (2.54) 0.650 (16.51) + 0.707 (17.96) 9.200 (5.08) 0.150 (3.81) _.| 0.250 (6.36) T 0.682 a Se 4 0.109 (2.77) T 0.218 (5.54) Typ. smear l Pmacae via at 8 ey a i ra .109 (2.77) Typ. ______4 0.112 (2.84 - 02 oa bbeasho-d : t * 2200 (s08)--= 3 y ik ee ee] vey weseeO Phen * a * 0080S, 0.100 (2. on 1 | 0.086 (1. ai 0. ry 0.100 (2.54) nT 0.056 (1.42) 0.131 (3. 2] 0.163 (4.14) Typ. (3.33) | 0.600 (15.24) 0.131 (3.33) - i. 092 (2.34) 0.926 (23.52) Typ. 1 0.900 (22.86) Typ. 0.265 (6.73) Typ. 21W1 | 1.250 (31.75) Typ. 1.250 (31.75) Typ. 8W8 13W6 0.943 (8.71) _, 0.275 (6.98) Typ. 0.109 (2.77) TYP. =) fo 0.100 (2.54) 0.109 (2.77) Typ. pe 0.109 B 77) Typ. - -0.112 (284) 0,055 (1.40) Typ. 0.200 (6.08) 9.085 (40) Te 0.112 (2.84) 1 aa Aa a al An | Aa, MM, _ Az, | Ag m0 6 oa a @ #ese & sf = * ccesecce f e 14 stot. QS P e <9=- = = , ee ce sieseceeyap-t 0.100 (2.54) - 0.055 (1.40) Typ. } [. 0.974 (9.50) 0.200 (5.08) _ besses leet ne Meee ecsesocevacee eeccccetlenccscne f j vere case Fo E@ =t ee ee | otal eee 0.100 (2.54) Ty 0.893 0.056 @3_33 3-3-3 ee = 8 jig 4 + @ 0.131 (3.33) as (22.68) Typ. (1.42) AT AB | Aa ont At 0075+ ry. a a4 070 6.86) | a2 ad 1.250 (31.75) Typ. | (6.86) Typ. (1.91) 10.540 (13.72) 1.203 (30.56) Typ. 0.810 (20.57) Typ. 27W2 oaw7 1.203 (30.56) Typ. 36W4 * 0.109 (2.77) Typ. 0.112 (2.84) 0.109 (2.77) Typ. 4 0.112 (2.84) 0.100 9-055 (1.40) Typ. 4 0.112 (2.84) nt o199 9-085 (1.40) Typ. | 0.112 (2.84) 1 (2.54) fe * soesece eee gs _____| (2.54) a jaz at 0.160 4 f at 0.180 + [dt 0.540 (13.72) (3.81) a 2 0.810 (20.57) (3.81) 0.200 (5.08) 0.075 (1.91} 0.810 (20.57) 1.203 (30.56) Typ. 43W2 Suggest 0.045 (1.14) & hole for signa! contact termination positions. Suggest 0.12320.003 (3.12) @ hole for mounting connector with push-on fasteners. Note: Shell size 5 connectors are supplied inverted when ordered with 90 printed board mount shielded contacts. 0.200 (5.08) 0.075 (1.91) ~ 1.203 (30.56) Typ. 47w1 DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS SUBJECT TO CHANGE 7 Positronic A . 14 Industries, Inc.CBD 095311) Series INDUSTRIAL AND MILITARY QUALITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 insert 0 When Step Is Not Used STEP 1 2 3 4 5 6 7 8 9 CBD 1 17W2 F 55 R7 N T2 x STEP 1 - Basic Series **STEP 9 - Special Options CBD Industrial Quality with Open Entry 759.0 Blind Mate Pilot Signal Contacts 759.1 Blind Mate Panel CBM - Military Conformance with Closed Entry Signal Contacts STEP 8 - Shell Options . Zinc Plat ith Dich STEP 2 - Combo-D Series Connector 3 _ Shanlece Steal ichromate Seal Variants X Tin Plated Shell Size 1 Z Tin Plated and Dimpled 5W1 * 7 woe Shell Size 2 STEP 7 - Locking and Polarizing Systems 3W3, 7W2, 11W1 0 ~ None Shell Size 3 T - Fixed Female Jackscrews ~ Fi 5W5, 9W4, 13W3, 172, 21W1 tl Rotating Male saexscrews Shel! Size 4 8W8, 13W6, 17W5, 21WA4, 25W3, 27W2 *STEP 6 - Hoods and Push-On Fasteners Shell Size 5 OQ None 24W7, 36W4, 43W2, 47W1 *Z Hood, Top or Side Opening, robust extended height, Shell Size 6 plastic and composite, with rotating male jackscrews, 46W4 shell sizes 1 through 6 H Hood, Top Opening, Metal, shell sizes 2 through 5 . G Hood, EMI/RFI, Metal, shell sizes 1 through 5 arer 3: Connector Gender N Push-on Fastener, for 90 Mounting Brackets F -Female j *STEP 5 - Mounting Style STEP 4 - Type of Contacts 0 Connector ordered without size 8 power shielded or high voltage removable contacts. See pages 16, 18, 20 for con- tact part numbers. 2 - Solder, Signal Contacts only. 3 - Solder, Straight Printed Board Mount with Signal Contacts, 0.170 (4.32) Tail Length. 35 Solder, Straight Printed Board Mount with Signal and 0.078 (1.98) & Power Contacts, 0.170 (4.32) Tail Length. 36 - Solder, Straight Printed Board Mount with Signal and 0.094 (2.39) @ Power Contacts, 0.170 (4.32) Tait Length. 37 - Solder, Straight Printed Board Mount with Signal and 0.125 (3.18) @ Power Contacts, 0.170 (4.32) Tail Length. 5 Solder, 90 Printed Board Mount with Signal Contacts only, 0.283 (7.19) Signal Contact Extension. 55 Solder, 90 Printed Board Mount with Signal and 0.078 (1.98) @ Power Contacts, 0.283 (7.19) Signal Contact Extension. 57 Solder, 90 Printed Board Mount with Signal and 0.125 (3.18) @ Power Contacts, 0.283 (7.19) Signa! Contact Extension. 65 Solder, Straight Printed Board Mount with Signal and Shielded Contacts MDS/FDS 4201D footprint, 0.170 (4.32) Signal Contact Tail Length. 7 - Solder, Metric System 90 Printed Board Mount with Signal Contacts only, 0.370 (9.40) Signal Contact Extension. 75 Solder, Metric System 90 Printed Board Mount with Signal and 0.078 (1.98) @ Power Contacts, 0.370 (9.40) Signal Contact Extension. 77 ~~ Solder, Metric System 90 Printed Board Mount with Signal and 0.125 (3.18) @ Power Contacts, 0.370 (9.40) Signal Contact Extension. *85 Solder, 90 Printed Board Mount with Signal and Shielded Contacts MRT/FRT 4201D footprint, 0.283 (7.19) Signal Contact Extension. 0 B3 B& F P P2 R2 R6 R7 R8 Ss S2 $5 S6 ~ Mounting Hole, 0.120 (3.05) 0 Bracket, Mounting, 90 Metal with Cross Bar ~ Bracket, Mounting, 90 Plastic with Cross Bar ~ Float Mounts, Universal Threaded Post, Brass, 0.250 (6.35) Length ~ Threaded Post, Nyton, 0.250 (6.35) Length Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Thread Fixed Femaie Jackscrews with Cross Bar ~ Bracket, Mounting, 90 Metal, Swaged to Connector with 0.120 (3.05) @ Mounting Hole with Cross Bar ~ Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Threads with Cross Bar Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Locknut with Cross Bar Swaged Spacer, 4-40 Threads, 0.250 (6.35) Length ~ Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length Swaged Locknut, 4-40 Threads ~ Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.250 (6.35) Length . aap | Positronic Industries, Inc. *For additional information on accessories list- ed in steps 5, 6, 7 & 9, see Accessory Catalog. **Z Hood recommended for use with CBD and CBM series for shell sizes 1 through 6. **Not available on shell size 6, CBD 46W4.