031-2318-RFX - Amphenol Corporation

Cable Group Listing

122

Amphenol® RF: 800-627-7100

122

Amphenol® RF: 800-627-7100

TNC

TNC Connectors

Description

Developed in the late 1950’s, the TNC stands for Threaded Neill Concelman and is named

after Amphenol engineer Carl Concelman. Designed as a threaded version of the BNC,

the TNC series features screw threads for mating. TNC connectors are miniature, thread-

ed weatherproof units with a constant 50 Ω impedance, operating from DC – 11 GHz.

There are two types of TNC connectors: Standard and Reverse Polarity. Reverse polar-

ity is a keying system accomplished with a reverse interface, and ensures that reverse

polarity interface connectors do not mate with standard interface connectors. Amphenol

accomplishes this by inserting female contacts into plugs and male contacts into jacks.

Other manufacturers may use reverse threading to accomplish reverse polarity keying.

Amphenol’s commercial grade connector offering carries the part number designation

“RFX” for easy recognition. These low-cost connectors typically utilize die cast and mold-

ed components. While performance will not be equal to the industrial or military grade

products, these connectors are ideal for use on a variety of commercial applications.

Features/Beneﬁts

 •Threadedcouplinginterfaceensuresconnectorwillnotde-couplein

vibration-intensive applications.

 •Availableinbothstandardandreversepolarityinterfaces.

 •PerformancefromDC–11GHzoperationsinmanyapplications.

Applications

•Antennas

•BaseStations

•CableAssemblies

•Cellular

•Instrumentation

•Mil-Aero

•WLANNetworks

•Radar

•Telecom

•RFIDReaders

Amphenol® RF

123

Amphenol® RF: 800-627-7100 TNC

Standard TNC Speciﬁcations

Electrical

Impedance 50 Ω nominal

Frequency range DC - 11 GHz

VSWR 1.3 max. @ DC - 11 GHz (straight)

1.35 max. @ DC - 11 GHz (right-angle)

RF-leakage 60 dB minimum @ 3 GHz

Voltage rating (at sea level) ≥ 500 V peak (depending on cable)

Contact resistance center contact: ≤ 1.5 mΩ

outer contact: ≤ 0.2 mΩ

braid to body: ≤ 0.1 mΩ

Insulation resistance 5,000 MΩ minimum

Insertion loss maximum 0.18 dB @ 9 GHz

Dielectric withstanding voltage 1,500 Vrms (at sea level)

Mechanical

Mating 7/16 threaded coupling (MIL-STD-348)

Coupling torque, min./max. 4.1 / 6.1 in-lbs (46 / 69 N-cm), recommended

Coupling nut retention force 101 lbs (450N) min.

Braid/Jacket cable afﬁxment Hex crimp or screw-threaded clamps

Durability (matings) 500 cycles minimum

Environmental

Temperature range -65°C to +165°C

Weatherproof crimp: w/ heat shrink tubing, clamp: w/ gasket

Hermetic seals Helium leak test, 2 x 10^8 cc/sec.

Thermal shock MIL-STD-202, method 107, cond. B

Moisture resistance MIL-STD-202, method 106

Corrosion MIL-STD-202, method 101, cond. B

Vibration MIL-STD-202, method 204, cond. B

Mechanical shock MIL-STD-202, method 213, cond. G

Altitude MIL-STD-202, method 105, cond. C

Material

Male contact Brass, gold plated

Female contact Beryllium copper or phosphor bronze, silver or gold plated

Crimp ferrule Copper or brass, nickel plated

Other metal parts Brass, nickel plated (except M39012 silver plated)

Insulator PTFE, copolymer of styrene, glass TFE (hermetically sealed)

Gasket Silicone or synthetic rubber

Plug Jack

TNC

Note: These characteristics are typical but may not apply to all connectors.

124

Amphenol® RF: 800-627-7100

TNC

Cable Connectors

Straight Plugs

Plating Termination

Cable Group Part Number Body Contact Body Contact

B 031-2315 Nickel Gold Crimp Crimp

B 031-2315-RFX Nickel Gold Crimp Crimp

B1 031-2242-RFX Nickel Gold Crimp Solder

B3 031-6147 Nickel Gold Crimp Crimp

C 031-2367 Nickel Gold Crimp Crimp

C 031-2367-RFX Nickel Gold Crimp Crimp

C 000-79875 Nickel Silver Clamp Solder

C 000-79875-RFX Nickel Silver Clamp Crimp or Solder

C, C1 031-6148 White Bronze Gold Clamp Crimp

C1 031-2373 Nickel Silver Crimp Crimp

C2 031-6138 Nickel Gold Crimp Solder

D 031-6142 Nickel Gold Crimp Solder

D 031-5987-RFX Nickel Gold Clamp Solder

E 031-2368 Nickel Gold Crimp Crimp

E 031-2368-RFX Nickel Gold Crimp Crimp

F 031-6143 Nickel Gold Crimp Solder

F1 031-6153 Nickel Gold Clamp Solder

G2 031-6000-RFX Nickel Gold Crimp Solder

G3 031-6001-RFX Nickel Gold Crimp Solder

G4 031-6154 Nickel Gold Clamp Solder

G4 031-6140 Nickel Gold Crimp Crimp

K 031-6141 Nickel Gold Crimp Solder

L 031-6145 Nickel Gold Solder Crimp

L2 031-6144 Gold Gold Solder Crimp

Angle Plugs

Plating Termination

Cable Group Part Number Body Contact Body Contact

B 031-6160 Nickel Gold Crimp Solder

B1 031-6162 Nickel Gold Crimp Solder

B2 031-6161 Nickel Gold Crimp Solder

B3 031-6163 Gold Gold Crimp Solder

C 031-5849-RFX Nickel Gold Crimp Solder

C 031-6156 Nickel Gold Crimp Solder

C1 031-6157 Nickel Gold Crimp Solder

E 031-6158 Nickel Gold Solder Crimp

G2 031-6003-RFX Nickel Gold Crimp Solder

G3 031-6002-RFX Nickel Gold Crimp Solder

L 031-6165 Gold Gold Solder Solder

L2 031-6164 Nickel Gold Solder Solder

125

Amphenol® RF: 800-627-7100 TNC

A 031-6177 Nickel Gold Crimp Crimp

B 031-6174 Nickel Gold Crimp Solder

B3 031-6175 Nickel Gold Crimp Solder

C 031-6166 Nickel Gold Crimp Crimp

C1 031-6169 Nickel Gold Crimp Crimp

L 031-6178 Nickel Gold Solder Solder

L2 031-6179 Nickel Gold Solder Crimp

C2 031-6170 Nickel Gold Crimp Crimp

Rear Mount Bulkhead Jacks: 4 Hole Flange

Plating Termination

Cable Group Part Number Body Contact Body Contact

L 031-6180 Nickel Gold Solder Solder

L2 031-6181 Nickel Gold Solder Solder

Receptacles

Rear Mount Bulkhead Jacks: 4 Hole Flange

Plating

Part Number Body Contact

031-2300 Nickel Gold

031-2300-RFX Nickel Silver

Straight Bulkhead Jacks

Plating Termination

Cable Group Part Number Body Contact Body Contact

B 031-2318 Nickel Gold Crimp Crimp

B 031-2318-RFX Nickel Gold Crimp Crimp

B 031-6176 Nickel Gold Crimp Crimp

E 031-5859-RFX Nickel Gold Crimp Crimp

G3 031-6171 Nickel Gold Crimp Crimp

TNC

126

Amphenol® RF: 800-627-7100

TNC

Printed Circuit Board Connectors

Angle Jacks

Plating

Part Number Body Contact

031-5607 Matte Tin Silver

031-5660 Nickel Gold

031-6294 Matte Tin Gold

Straight Jacks

Plating

Part Number Body Contact

031-71063 Nickel Gold

031-6293 Matte Tin Gold

Adapters

Straight Jack to Jack

Plating

Part Number Body Contact Description

031-4791 Nickel Silver Jack to Jack

031-6203 Nickel Gold Plug to Plug

Bulkhead Jack to Jack

Plating

Part Number Body Contact Description

031-6198 Nickel Gold Bulkhead with Gasket

031-6201 Nickel Gold Bulkhead without Gasket

Angle Jack to Plug

Plating

Part Number Body Contact

000-79125 Nickel Gold

Tee Jack-Plug-Jack

Plating

Part Number Body Contact

000-79700 Nickel Silver

127

Amphenol® RF: 800-627-7100

TNC

Printed Circuit Board Connectors

Angle Jacks

Plating

Part Number Body Contact

031-5607 Matte Tin Silver

031-5660 Nickel Gold

031-6294 Matte Tin Gold

TNC

Reverse Polarity Connectors

Angle Jacks

Plating

Part Number Body Contact

031-5684 Nickel Gold

031-6031 Nickel Gold

031-5685 Nickel Gold

031-6030 Nickel Gold

031-5680 Nickel Gold

031-5686 Nickel Gold

031-6033 Nickel Gold

031-5677-1000 Nickel Gold

031-6032 Nickel Gold

031-6293 Matte Tin Gold

128

Cable Group Listing

Cable Group Cable Type

ARG-178, 196

BRG-174, 188A, 316, Belden 7805

B1 RG-179, 187, Belden 9221

B2 RD-188/U, RD-316/U

B3 RD-179/U, AT&T 19224L2

C RG-58, 58A, 58C, 141, 303, LMR195, Belden 7806A, 9907

C1 RG-55, 142, 223, 400

C2 LMR200, Belden 7807A

DRG-58/U Plenum, Thinnet, RG-122/U, Belden 88240, 89907

ERG-59, 62, 140, 210, Belden 8241, 8263, 8279, 9209

E1 RG-59/U 20 AWG center conductor, Belden 1426A, 1505A, 9100, 9278

E2 RD-59/U, Belden 8281, 9141, 9231

E3 RG-59/U Quad Shield, Belden 1152A

FRG-59/U Plenum, Belden 1560A, 9259, 82259, 89259, 88241

F1 RG-59/U Plenum 20 AWG center conductor, Belden 82108

G1 RG-6, 143, 212

G2 8X, LMR240, Belden 7808A, 9258

G3 LMR400, Belden 7810A, 8214, 9913

G4 RG-8, 8A, 9, 87A, 213, 214, 225, 393

G5 RD-6/U

HRG-11

H1 Belden 1694A, 9248

H2 Belden 1859A, 7731, 8213, 9292

H3 RG-54A/U

IAT&T 734A, Belden 1505A

I2 AT&T 735A, Belden 735A1

JQuad 59 headend cable

KLMR600

K2 Belden 1695A

K3 RG-122, 180, 195, Belden 1855, 1865A, 8218

L.141 semi-rigid, RG-402/U

L2 .085, .086, .087 semi-rigid, RG-405/U

L3 .250 semi-rigid

L4 .047 semi-rigid, Belden 1674

M1/2 inch annular corrugated

M1 1 1/4 inch annular corrugated

M2 1 5/8 inch annular corrugated

M3 7/8 inch annular corrugated

N1/4 Helical

N1 3/8 Helical

N2 1/2 Helical

N3 7/8 inch SFC

P1 .81 mm OD micro-cable

P2 1.13 mm OD micro-cable, TCB-068

P3 1.32 mm OD micro-cable

P4 1.37 mm OD micro-cable