ZPD2.7 ... ZPD75 (500 mW) ZPD2.7 ... ZPD75 (500 mW) Silicon Planar Zener Diodes Silizium-Planar-Zener-Dioden Version 2013-04-23 Maximum power dissipation Maximale Verlustleistung 3.9 62.5 0.4 3 O 1.90.1 O max 0.5 500 mW Nominal Z-voltage Nominale Z-Spannung 2.7...75 V Glass case Glasgehause ~ DO-35 ~ (SOD-27) Weight approx. Gewicht ca. 0.13 g Equivalent SMD-version Aquivalente SMD-Ausfuhrung ZMM1 ... ZMM75 Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack Dimensions - Mae [mm] Standard Zener voltage tolerance is graded to the international E 24 (~ 5%) standard. Other voltage tolerances and higher Zener voltages on request. Die Toleranz der Zener-Spannung ist in der Standard-Ausfuhrung gestuft nach der internationalen Reihe E 24 (~ 5%). Andere Toleranzen oder hohere Arbeitsspannungen auf Anfrage. Maximum ratings and Characteristics Grenz- und Kennwerte ZPD-series Power dissipation Verlustleistung TA = 25C Ptot 500 mW 1) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+175C -50...+175C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 300 K/W 1) Thermal resistance junction to lead Warmewiderstand Sperrschicht - Anschlussdraht RthL < 240 K/W Zener voltages see table on next page - Zener-Spannungen siehe Tabelle auf der nachsten Seite 23 1 2 3 Valid, if leads are kept at ambient temperatere at a distance of 10 mm from case Gultig, wenn die Anschlussdrahte in 10 mm Abstand vom Gehause auf Umgebungstemperatur gehalten werden Tested with pulses - Gemessen mit Impulsen The ZPD1 is a diode operated in forward. Hence, the index of all parameters should be "F" instead of "Z". The cathode, indicated by a band, has to be connected to the negative pole. Die ZPD1 ist eine in Durchlass betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index "F" anstatt "Z" zu setzten. Die mit einem Balken gekennzeichnete Kathode ist mit dem Minuspol zu verbinden. (c) Diotec Semiconductor AG http://www.diotec.com/ 1 ZPD2.7 ... ZPD75 (500 mW) Maximum ratings Type Typ Grenzwerte 2 Zener voltage ) Zener-Spannung 2) IZ = 5 mA Dynamic resistance Diff. Widerstand rzj [] at f = 1 kHz Temp. Coeffic. of Z-voltage ...der Z-Spannung Reverse volt. Sperrspanng. IR = 100 nA Z-current 1) Z-Strom 1) TA = 25C Vzmin [V] Vzmax [V] IZ = 5 mA IZ = 1 mA VZ [10-4 /C] VR [V] IZmax [mA] ZPD2.7 2.5 2.9 75 (< 83) < 500 -9...-4 - 172 ZPD3.0 2.8 3.2 80 (< 95) < 500 -9...-3 - 156 ZPD3.3 3.1 3.5 80 (< 95) < 500 -8...-3 - 143 ZPD3.6 3.4 3.8 80 (< 95) < 500 -8...-3 - 132 ZPD3.9 3.7 4.1 80 (< 95) < 500 -7...-3 - 122 ZPD4.3 4.0 4.6 70 (< 85) < 500 -6...-1 - 109 ZPD4.7 4.4 5.0 60 (< 78) < 500 -5...+2 - 100 ZPD5.1 4.8 5.4 30 (< 60) < 480 -3...+4 > 0.8 93 ZPD5.6 5.2 6.0 10 (< 40) < 400 -2...+6 >1 83 ZPD6.2 5.8 6.6 5 (< 10) < 200 -1...+7 >2 76 ZPD6.8 6.4 7.2 4.5 (< 8) < 150 +2...+7 >3 69 ZPD7.5 7.0 7.9 4 (< 7) < 50 +3...+7 >5 63 ZPD8.2 7.7 8.7 4.5 (< 7) < 50 +4...+7 >6 57 ZPD9.1 8.5 9.6 5 (< 10) < 50 +5...+8 >7 52 ZPD10 9.4 10.6 5.2 (< 15) < 70 +5...+8 > 7.5 47 ZPD11 10.4 11.6 6 (< 20) < 70 +5...+9 > 8.5 43 ZPD12 11.4 12.7 7 (< 20) < 90 +6...+9 >9 39 ZPD13 12.4 14.1 9 (< 25) < 110 +7...+9 > 10 35 ZPD15 13.8 15.6 11 (< 30) < 110 +7...+9 > 11 32 ZPD16 15.3 17.1 13 (< 40) < 170 +8...+9.5 > 12 29 ZPD18 16.8 19.1 18 (< 50) < 170 +8...+9.5 > 14 26 ZPD20 18.8 21.2 20 (< 50) < 220 +8...+10 > 15 24 ZPD22 20.8 23.3 25 (< 55) < 220 +8...+10 > 17 21 ZPD24 22.8 25.6 28 (< 70) < 220 +8...+10 > 18 20 ZPD27 25.1 28.9 30 (< 80) < 250 +8...+10 > 20 17 ZPD30 28 32 35 (< 80) < 250 +8...+10 > 22 16 ZPD33 31 35 40 (< 80) < 250 +8...+10 > 24 14 ZPD36 34 38 40 (< 90) < 250 +8...+10 > 26 13 ZPD39 37 41 50 (< 90) < 300 +10...+12 > 28 12 ZPD43 40 46 60 (< 100) < 500 +10...+12 > 30 11 ZPD47 44 50 70 (< 110) < 700 +10...+12 > 33 10 ZPD51 48 54 80 (< 125) < 700 +10...+12 > 36 9 ZPD56 52 60 90 (< 135) < 750 +10...+12 > 39 8 ZPD62 58 66 100 (< 150) < 800 +10...+12 > 44 8 ZPD68 64 72 110 (< 200) < 850 +10...+12 > 48 7 ZPD75 70 79 120 (< 250) < 900 +10...+12 > 52 6 1 2 Notes see previous page - Funoten siehe vorhergehende Seite http://www.diotec.com/ (c) Diotec Semiconductor AG ZPD2.7 ... ZPD75 (500 mW) 120 10 3 [% ] [mA] 100 10 2 80 Tj = 100C 60 10 Tj = 25C 40 1 20 IF IFAV 0 0 TA 100 50 150 10 [C] -1 0 Rated forward current versus ambient temperature1 ) Zul. Richtstrom in Abh. von der Umgebungstemp.1 ) 150 VF 0.4 0.6 0.8 1.0 [V] 1.4 Forward characteristics (typical values) Durchlasskennlinien (typische Werte) 3 Tj = 25C 2.7 3.3 3.8 10 4.7 [mA] 5,6 8,2 6,8 6,2 7,5 Tj = 25C f = 1.0 MHz VR = 1V [pF] 9,1 VR = 2V 100 IZmax 2 10 VR = 1V 50 VR = 2V IZ 10 IZ = 5 mA 0 0 4 5 7 VZ 2 3 6 8 Typical breakdown characteristic - tested with pulses Typische Abbruchspannung- gemessen mit Impulsen [V] 10 Cj 1 1 VZ 10 100 [V] Junction capacitance vs. zener voltage (typical) Sperrschichtkapazitat in Abh. v.d. Zenerspg. (typ.) 60 [mA] 50 10 45 18 24 30 36 43 51 56 62 68 75 40 35 30 25 20 I Zmax 15 Tj = 25C IZ 5 0 0 10 20 30 40 50 60 70 Typical breakdown characteristic - tested with pulses Typische Abbruchspannung - gemessen mit Impulsen (c) Diotec Semiconductor AG 80 VZ http://www.diotec.com/ 3