Slim Relay G2RV 257
Slim Relay
G2RV
Industrial Slim Relay Rated at 6 Amps
• Large plug-in terminals for reliable connection.
• LED indicator, clear case, and mechanical flag allows easy
and immediate visual operation verification.
• Has a maximum switching voltage of 440 VAC.
• Slim outline to save space in high volume rack and PLC
applications.
• Low power consumption for system energy savings.
X
VDE
Model Number Structure
■Model Number Legend
Note: LED indicator standard feature on Socket.
Ordering Information
■List of Models
■Relay and Socket Combinations
G2RV-SL @ @ @ - @
123
4 5
1. Auxiliary Type Designation 3. Relay LED
SL: Slim relay and socket combination 0: Without LED
2. Wire Connection 4. Relay Pushbutton
7: Screw terminals 0: Without pushbutton
5: Push-in terminals
5. Input Voltage
(Complete part numbers listed in the Relay and Socket
Combinations Chart below)
Classification Enclosure rating Input voltage Type of
connection
Contact form
SPDT
Plug-in terminals General-purpose Unsealed AC/DC Screw terminals G2RV-SL700
Push-in terminals G2RV-SL500
Input voltage Screw terminals Push-in terminals
12 VDC G2RV-SL700-DC12(DC11) G2RV-SL500-DC12(DC11)
24 VDC G2RV-SL700-DC24(DC21) G2RV-SL500-DC24(DC21)
24 VAC/DC G2RV-SL700-AC/DC24 G2RV-SL500-AC/DC24
48 VAC/DC G2RV-SL700-AC/DC48 G2RV-SL500-AC/DC48
110 VAC G2RV-SL700-AC110 G2RV-SL500-AC110
230 VAC G2RV-SL700-AC230 G2RV-SL500-AC230
Note: Relay and Socket Combinations
are cULus listed.
LISTED
258 Slim Relay G2RV
Specifications
■Coil Ratings @ 23°C
■Contact Ratings
■Characteristics
Note: Data shown are of initial values.
Rated voltage Rated current Operate
voltage
Release
voltage
Power consumption Input voltage
AC DC % of rated voltage AC (VA)
Approx.
DC (mW)
Approx.
% of rated
voltage
50 Hz 60 Hz
12 VDC --- --- 27.2 80% max. 10% min. --- 300 mW ±10%
24 VDC --- --- 13.3 --- 300 mW
24 VAC/DC 21.1 22.5 13.0 0.5 VA 300 mW
48 VAC/DC 8.5 9.0 5.2 0.4 VA 250 mW
110 VAC 7.1 7.5 --- 0.8 VA ---
230 VAC 7.3 7.9 --- 1.7 VA ---
Number of poles 1 pole
Load Resistive load
(cos φ = 1)
Inductive load
(cos φ = 0.4, L/R = 7 ms)
Rated load 6 A at 250 VAC;
6 A at 30 VDC
2.5 A at 250 VAC;
2 A at 30 VDC
Rated carry current 6 A
Max. switching voltage 400 VAC, 125 VDC
Max. switching current 6 A
Max. switching power 1,500 VA
180 W
500 VA
60 W
Minimum permissible load 10 mA at 5 VDC : P level: λ60 = 0.1 x 10-6/operation
Item 1 pole
Contact resistance 100 mΩ max.
Operate (set) time 20 ms max.
Release time 40 ms max.
Max. operating frequency Mechanical: 18,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between coil and contacts
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
Vibration resistance Destruction: 10 to 55 Hz, 1.0 mm double amplitude
Malfunction: 10 to 55 Hz, 1.0 mm double amplitude
Shock resistance Destruction: 1,000 m/s2 (approx. 100G)
Malfunction: 200 m/s2 (approx. 20G)when energized; 100 m/s2 (approx. 10G) when not energized
Life expectancy Mechanical: 5,000,000 operations min.
Electrical: 100,000 typical;
NO 70,000 operations min.;
NC 50,000 operations min.
Ambient temperature Operating: –40°C to 55°C (with no icing or condensation)
Ambient humidity Operating: 5% to 85%
Weight Approx. 35 g
Overvoltage category III
Pollution degree 2
Contact Material AgSnIn
Creepage distance 7.0 mm
Clearance distance 5.5 mm
Slim Relay G2RV 259
■Approved Standards
UL Recognized (File No. E41643) - - Ambient Temp. = 40°C
IEC/VDE (EN 61810)
Engineering Data
Endurance Switching Capacity, DC Resistive Load
Switching Timing
Model Contact form Coil ratings Contact ratings Operations
G2RV-SL Series SPDT 12 to 48 VDC
24 to 230 VAC
250 VAC 6 A (Resistive Load)
30 VDC 6 A (Resistive Load)
400 VAC 2 A (Resistive Load)
6,000
Contact form Coil ratings Contact ratings Operations
1 pole 12, 24 VDC
24, 48 VAC/DC
110, 230 VAC
250 VAC 6 A (Res.)
30 VDC 6 A (Res.)
400 VAC 2 A (Res.)
50,000
50,000
6,000
10
100
1000
02 4
Switching current (A)
Endurance (x 103 operations)
250VAC resistive load
30VDC resistive load
30VDC inductive load
(L/R=7ms)
250VAC inductive load
(cos ϕ = 0.4)
6
0,1
1,0
10,0
20 60 100 140 180 220
Switching voltage (VDC)
DC Breaking Current (A)
Model number Operating time (typical) Release time (typical
G2RV-SL7❏❏/5❏❏ DC12 5 ~ 7 ms 5 ~ 8 ms
G2RV-SL7❏❏/5❏❏ DC24 5 ~ 7 ms 6 ~9 ms
G2RV-SL7❏❏/5❏❏ AC/DC24 5 ~ 7 ms 17 ~ 22ms
G2RV-SL7❏❏/5❏❏ AC/DC48 5 ~ 7 ms 22 ~ 30 ms
G2RV-SL7❏❏/5❏❏ AC110 12 ~ 15 ms 22 ~ 30 ms
G2RV-SL7❏❏/5❏❏ AC230 12 ~ 15 ms 22 ~ 30 ms
260 Slim Relay G2RV
Accessories
■PLC Interface (for G2RV-SL700 series only)
List of Models
Specifications Electrical schematic P2RVC-8-O-F
■Cables for PLC Interface P2RVC-8-O-F
P2RV-4-@@@C
Cable to connect CJ1 to 4 x P2RVC-8-O-F
List of Models
4x10 pole IDC mounting to 4 x P2RVC-8-O-F
40 pole IDC mounting to Omron PLC CJ1-OD232
Technical data
Model number Description Connection
P2RVC-8-O-F PLC Output Interface for 8x
G2RV-SL700 series.
PnP-type
Flat cable
(Ribbon cable
connector, 10 pole,
IEC603/1)
Input Rated voltage 30 VAC/VDC max.
Current capacity 0.5 A per channel
2.0 A total current, power sup-
ply terminal
Characteristics Ambient
temperature
Operating: 0 to 55°C
Storage: −20 to 85°C
Overvoltage
category
III
Pollution degree 2
Model number Cable length
P2RV-4-100C 1.0 m
P2RV-4-200C 2.0 m
P2RV-4-300C 3.0 m
P2RV-4-500C 5.0 m
A
A1 A2 A3 A4 A5 A6 A7 A8 A9 A100B1B2B3B4 B5 B6 B7 B8 B9 B100C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10
B C D
40 38 36 34 32 30 28 26 22 24 39 37 35 33 31 29 27 25 21 23 20 18 16 14 12 10 8 6 2 4 19 17 15 13 11 9 7 5 1 3
Cable lengt h as ind ict ad
by model number.
@@@ = length in centimeters
Split into 4 sections
Lengt h = 30 cm
40 Wire
B
A
D
C
Control line AWG26/0.14 mm2, tin-plated copper
Diameter cable 10.6 mm (one end splits into 4 sections: A, B, C, D
Operating voltage 60 VDC
Continuous current per signal wire 0.5 A
Max. total current, 4 bytes, each 1.0 A
Test voltage 0.5 KV, 50 Hz, 1 min
Operating temperature range –20°C to +50°C
Slim Relay G2RV 261
P2RV-A@@@C
Cable, single sided 10 pole IDC connector, to connect to P2RVC-8-O-F
List of Models
10 pole IDC mounting to P2RVC-8-O-F
Technical data
■Stand-Alone Relays for MRO and Reference
Model Number Legend
List of Models
Model number Cable length
P2RV-A100C 1.0 m
P2RV-A200C 2.0 m
P2RV-A300C 3.0 m
P2RV-A500C 5.0 m
WHITE
GREY
PURPLE
BLUE
GREEN
YELLOW
ORANGE
RED
BROWN
BLACK
10
9
8
7
6
5
4
3
2
1
Open end
Cable len gt h as ind ict ad
by model number.
@@@ = length in centimeters
Outer isolation removed
Lengt h = 30 cm
10 Wire
Control line AWG26/0.14 mm2, tin-plated copper
Diameter cable 6.8 mm
Operating voltage 60 VDC
Continuous current per signal wire 0.5 A
Max. total current 1.0 A
Test voltage 0.5 KV, 50 Hz, 1 min
Operating temperature range –20°C to +50°C
G2RV-@ - @ @ @ DC@
1234 5
1. Number of Poles 4. Contact Material
1: 1 pole Blank: AgSnIn
2. Terminals 5. Rated Coil Voltage
S: Plug-In 11, 21, 48
3. Relay LED
Blank: Without LED
Model number Replacement for
G2RV-1-S DC11 G2RV-SL7@@/5@@ DC12(DC11)
G2RV-1-S DC21 G2RV-SL7@@/5@@ DC24(DC21)
G2RV-SL7@@/5@@ AC/DC24
G2RV-1-S DC48 G2RV-SL7@@/5@@ AC/DC48
G2RV-SL7@@/5@@ AC110
G2RV-SL7@@/5@@ AC230
262 Slim Relay G2RV
Accessories (Order Separately)
■Cross Bars
Model Number Legend
■Plastic Labels for G2RV Sockets
■Labels (Stickers) for G2RV Sockets
■Separating Plates
1. Number of Poles
020: 2 poles
030: 3 poles
040: 4 poles
100: 10 poles
200: 20 poles
2. Color
R:Red
S:Blue
B:Black
Model number Poles Color
P2RVM-020@ 2 Red (R)
Blue (S)
Black (B)
P2RVM-030@ 3
P2RVM-040@ 4
P2RVM-100@ 10
P2RVM-200@ 20
Specification Value
Max. current
(EN60947-7-1 sec tion 8.33 / 1991)
32 A
Max. voltage 400 VAC
Max. voltage (when cutting cross-bar without
using separation plate or end bracket)
250 VAC
P2RVM- @ @
12
Model number Quantity Color
R99-15 for G2RV 5 sheets x 120 labels =
600 labels (minimum order)
White
Model number Quantity Color
R99-16 for G2RV 10 sheets x 484 labels =
4,840 labels (minimum order)
White
Model number Quantity Description
P2RV-S 50 plates
(minimum order)
Provides isolation between
adjacent relays to achieve
400 V isolation.
Slim Relay G2RV 263
Dimensions
Note: All units are in millimeters unless otherwise indicated.
■Complete Unit
G2RV-SL700
12
11
14
A1
A2
24 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
12 V DC
Terminal Arrangement/
Internal Connections
(Top View)
12
11
14
A1
A2
Other Coil Voltage
Terminal Arrangement/
Internal Connections
(Top View)
Five, M2.5 x 6
6.2 max.
99.2
7.188.9
26.1
47.2
70.9
83
106.7 max.
92.7 max.
35
Input circuit
264 Slim Relay G2RV
G2RV-SL500
■Single Relay
G2RV-1-S
A2
A1
12
11
14
Terminal Arrangement/
Internal Connections
(Bottom View)
30.5 max.
3.5
0.5 2.4
1.8
5.2 max.
5.04 5.04
322
33 max.
16.2
Input circuit
Slim Relay G2RV 265
Installation
■Tools
G2RV-SL700 series: Flat-blade screwdriver should be used for mounting and / or releasing cables.
G2RV-SL500 series: Flat-bade screwdriver should be used for mounting stranded wires without ferrules and / or releasing cables.
Applicable Screwdriver
•Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)
Examples: FACOM AEF.2.5x75E (AEF. 3x75E)
VESSEL No. 9900-(-)2.5x75 (No. 9900-(-)3x100)
WAGO 210-119
WIHA 260/2.5x40 (260/3x50)
*Chamfering the tip of the driver improves insertion when used as an exclusive tool.
■Applicable Wires
Applicable Wire Sizes
G2RV-SL700 Series
Box Clamp Technology
G2RV-SL500 Series
Push-in Technology
■Wiring
Use wires of the applicable sizes specified above. The length of the
exposed conductor should be 7 mm for a G2RV-SL700 series,
12 mm for a G2RV-SL500 series.
Fig. 1 Exposed Conductor Length
− Flat-blade, Parallel-tip
− Flat-blade, Flared-tip
2.5 dia. (3.0 mm max.)
Cannot be used.
Wire type Applicable Wire Size Stripping Length
Stranded without ferrules 0.5 - 2.5 mm2 7 mm
Stranded with ferrules and plastic collar 0.5 - 2.5 mm2 7 mm
Stranded with ferrules without plastic collar 0.5 - 2.5 mm2 7 mm
Solid 0.5 - 2.5 mm27 mm
Wire type Applicable Wire Size Stripping Length
Stranded without ferrules 0.5 - 2.5 mm212 mm
Stranded with ferrules and plastic collar 0.5 - 2.5 mm2 12 mm
Stranded with ferrules without plastic collar 0.5 - 2.5 mm212 mm
Solid 0.5 - 2.5 mm2 12 mm
7 mm
12 mm
G2RV-SL700
G2RV-SL500
266 Slim Relay G2RV
Precautions
■Precautions for Connection
•Do not move the screwdriver up, down, or from side to side while it is inserted in the hole. Doing so may cause damage to internal components
(e.g., deformation of the clamp spring or cracks in the housing) or cause deterioration of insulation.
•Do not insert the screwdriver at an angle. Doing so may break the side of socket and result in a short-circuit.
•Do not insert two or more wires in the hole. Wires may come in contact with the spring causing a temperature rise or be subject to sparks.
(There are two wiring holes for each terminal.)
•Insert the screwdriver along the hole wall as shown below.
•If lubricating liquid, such as oil, is present on the tip of screwdriver, the screwdriver may fall out resulting in injury to the operator.
•Insert the screwdriver into the bottom of the hole. It may not be possible to connect cables properly if the screwdriver is inserted incorrectly.
■General Precautions
•Do not use the product if it has been dropped on the ground. Dropping the product may adversely affect performance.
•Confirm that the socket is securely attached to the mounting track before wiring. If the socket is mounted insecurely it may fall and injure the
operator.
•Insure that the socket is not charged during wiring and maintenance. Not doing so may result in electric shock.
•Do not pour water or cleansing agents on the product. Doing so may result in electric shock.
•Do not use the socket in locations subject to solvents or alkaline chemicals.
•Do not use the socket in locations subject to ultraviolet light (e.g., direct sunlight). Doing so may result in markings fading, rust, corrosion, or
resin deterioration.
•Do not dispose of the product in fire.
■Removing from Mounting Rail
To remove the socket from the mounting rail, insert the tip of screw-
driver in the fixture rail, and move it in the direction shown on the
right.
.
■Wiring Procedure for G2RV-SL500 series
Wire insertion
Insert the exposed conductor into the connection hole.
No other tools are required.
Note: In case of wiring stranded wires without ferrules screwdriver
should be inserted before inserting the wire. Screwdriver
should be removed after fully insertion of the wire.
Wire removal
Insert the specified screwdriver into the release hole.
Removing wire.
Removing screwdriver.
Screwdriver hole
Wire connection hole
Wire
Slim Relay G2RV
MEMO
Slim Relay G2RV
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Cat. No. X301-E-1b Printed in USA
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
09/11 Specifications subject to change without notice
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.