TLV3401, TLV3402, TLV3404 FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS SLCS135A - AUGUST 2000 - REVISED NOVEMBER 2000 D D D D D D Low Supply Current . . . 470 nA/Per Channel Input Common-Mode Range Exceeds the Rails . . . -0.1 V to VCC + 5 V Supply Voltage Range . . . 2.5 V to 16 V Reverse Battery Protection Up to 18 V Open Drain CMOS Output Stage Specified Temperature Range - 0C to 70C - Commercial Grade - -40C to 125C - Industrial Grade Ultrasmall Packaging - 5-Pin SOT-23 (TLV3401) - 8-Pin MSOP (TLV3402) Universal Op-Amp EVM (Reference SLOU060 for more information) SUPPLY CURRENT vs SUPPLY VOLTAGE 700 TA = 125C 600 I CC - Supply Current - nA D D description The TLV340x is Texas Instruments' first family of nanopower comparators with only 470 nA per channel supply current, which make this device ideal for battery power and wireless handset applications. TA = 70C 500 TA = 25C 400 TA = 0C 300 TA = -40C 200 100 VID = -1 V 0 0 2 4 6 8 10 12 14 16 VCC - Supply Voltage - V high side voltage sense circuit The TLV340x has a minimum operating supply voltage of 2.7 V over the extended industrial temperature range (TA = -40C to 125C), while having an input common-mode range of -0.1 to VCC + 5 V. The low supply current makes it an ideal choice for battery powered portable applications where quiescent current is the primary concern. Reverse battery protection guards the amplifier from an over-current condition due to improper battery installation. For harsh environments, the inputs can be taken 5 V above the positive supply rail without damage to the device. R1 1 M R3 100 k R2 1 M Vref R4 1 M VCC + P TLV340X D1 0 0 All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package. A SELECTION OF OUTPUT COMPARATORS DEVICE VCC (V) VIO (V) ICC/Ch (A) IIB (pA) tPLH (s) tPHL (s) tf (s) tr (s) RAIL-TORAIL OUTPUT STAGE TLV340x 2.5 - 16 250 0.47 80 55 30 TLV370x 2.5 - 16 250 0.47 80 25 30 5 - I OD 5 3.5 I PP TLC3702/4 3 - 16 1200 9 5 1.1 TLC393/339 3 - 16 1400 11 5 1.1 0.65 0.5 0.125 - PP 0.55 0.22 - - OD TLC372/4 3 - 16 1000 75 5 All specifications are typical values measured at 5 V. 0.65 0.65 - - - OD Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2000, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TLV3401, TLV3402, TLV3404 FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS SLCS135A - AUGUST 2000 - REVISED NOVEMBER 2000 TLV3401 AVAILABLE OPTIONS PACKAGED DEVICES VIOmax AT 25C TA 0C to 70C SMALL OUTLINE (D) 3600 V - 40C to 125C SOT-23 (DBV) PLASTIC DIP (P) SYMBOL TLV3401CD TLV3401CDBV VBDC -- TLV3401ID TLV3401IDBV VBDI TLV3401IP This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV3401CDR). This package is only available taped and reeled. For standard quantities (3000 pieces per reel), add an R suffix (i.e., TLV3401CDBVR. For small quantities (250 pieces per mini-reel), add a T suffix to the part number (e.g., TLV3401CDBVT). TLV3402 AVAILABLE OPTIONS PACKAGED DEVICES VIOma max AT 25C TA 0C to 70C SMALL OUTLINE (D) TLV3402CD 3600 V MSOP (DGK) SYMBOL PLASTIC DIP (P) TLV3402CDGK xxTIAJJ -- - 40C to 125C TLV3402ID TLV3402IDGK xxTIAJK TLV3402IP This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV3402CDR). TLV3404 AVAILABLE OPTIONS PACKAGED DEVICES VIOma max AT 25C TA 0C to 70C SMALL OUTLINE (D) PLASTIC DIP (N) TSSOP (PW) -- TLV3404CPW TLV3404CD 3600 V - 40C to 125C TLV3404ID TLV3404IN TLV3404IPW This package is available taped and reeled. To order this packaging option, add an R suffix to the part number (e.g., TLV3404CDR). TLV3401 D OR P PACKAGE (TOP VIEW) TLV3401 DBV PACKAGE (TOP VIEW) OUT GND IN+ 1 5 VCC 2 3 4 IN - NC IN - IN + GND 1 8 2 7 3 6 4 5 TLV3402 D, DGK, OR P PACKAGE (TOP VIEW) NC VCC OUT NC TLV3404 D, N, OR PW PACKAGE (TOP VIEW) 1OUT 1IN - 1IN+ VCC 2IN+ 2IN - 2OUT 2 1 14 2 13 3 12 4 11 5 10 6 9 7 8 POST OFFICE BOX 655303 4OUT 4IN - 4IN+ GND 3IN+ 3IN - 3OUT * DALLAS, TEXAS 75265 1OUT 1IN - 1IN + GND 1 8 2 7 3 6 4 5 VCC 2OUT 2IN - 2IN+ TLV3401, TLV3402, TLV3404 FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS SLCS135A - AUGUST 2000 - REVISED NOVEMBER 2000 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 V Differential input voltage, VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 V Input voltage range, VI (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to VCC + 5 V Input current range, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Output current range, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 125C Maximum junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to GND. 2. Input voltage range is limited to 20 V or VCC + 5 V, whichever is smaller. DISSIPATION RATING TABLE PACKAGE JC (C/W) JA (C/W) TA 25C POWER RATING D (8) 38.3 176 710 mW 142 mW TA = 125C POWER RATING D (14) 26.9 122.6 1022 mW 204.4 mW DBV (5) 55 324.1 385 mW 77.1 mW DGK (8) 54.2 259.9 481 mW 96.2 mW N (14) 32 78 1600 mW 320.5 mW P (8) 41 104 1200 mW 240.4 mW PW (14) 29.3 173.6 720 mW 144 mW recommended operating conditions Single supply Supply voltage voltage, VCC Split supply MIN MAX C-suffix 2.5 16 I-suffix 2.7 16 C-suffix 1.25 8 I-suffix 1.35 8 -0.1 0 VCC+5 70 - 40 125 Common-mode input voltage range, VICR Operating free-air free air temperature, temperature TA C-suffix I-suffix POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT V V C 3 TLV3401, TLV3402, TLV3404 FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS SLCS135A - AUGUST 2000 - REVISED NOVEMBER 2000 electrical characteristics at specified operating free-air temperature, VCC = 2.7 V, 5 V, 15 V (unless otherwise noted) dc performance PARAMETER VIO Input offset voltage VIO Offset voltage drift TEST CONDITIONS VIC= VCC/2, RS = 50 , AVD Common mode rejection ratio Common-mode Large-signal differential voltage amplification MIN RS = 50 VIC= 0 to 5 V V, RS = 50 VIC= 0 to 15 V V, RS = 50 RP = 1 M TYP MAX 250 3600 Full range 4400 25C VIC= 0 to 2 2.7 7 V, V CMRR RP = 1 M TA 25C 55 Full range 50 25C 60 Full range 55 25C 65 Full range 60 25C V V/C 3 25C UNIT 72 76 dB 88 1000 V/mV Full range is 0C to 70C for C suffix and - 40C to 125C for I suffix. If not specified, full range is -40C to 125C. input/output characteristics PARAMETER IIO TEST CONDITIONS Input offset current VIC = VCC/2 /2, IIB Input bias current ri(d) Differential input resistance IOZ High-impedance output leakage current VOL Low-level output voltage RP = 1 M M, RS = 50 TA 25C MIN TYP MAX 20 100 Full range 1000 25C 80 Full range pA 300 M 50 pA VO = VCC, VID = 1 V 25C VIC = VCC/2, IOL = 2 A, VID = -1 V 25C 8 25C 80 IOL = 50 A A, VID = -1 1V pA 25C VIC = VCC/2, VIC = VCC/2 /2, 250 1500 UNIT Full range Full range is 0C to 70C for C suffix and - 40C to 125C for I suffix. If not specified, full range is -40C to 125C. 200 mV 300 power supply PARAMETER TEST CONDITIONS Output state low ICC Supply current (per channel) RP = No pullup Output state high PSRR Power supply rejection ratio VIC = VCC/2 V, No load VCC= 2 2.7 7 V to 5 V VCC= 5 V to 15 V TA 25C MIN POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MAX 470 550 Full range 750 25C 560 Full range 640 UNIT nA 950 25C 75 Full range 70 25C 85 Full range 80 Full range is 0C to 70C for C suffix and - 40C to 125C for I suffix. If not specified, full range is -40C to 125C. 4 TYP 100 105 dB TLV3401, TLV3402, TLV3404 FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS SLCS135A - AUGUST 2000 - REVISED NOVEMBER 2000 switching characteristics at recommended operating conditions, VCC = 2.7 V, 5 V, 15 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS TA MIN Overdrive = 2 mV t((PLH)) t((PHL)) Propagation P ti d delay l titime, llow-to-high-level t hi h l l out ut output P ti d l titime, hi ht l l l Propagation delay high-to-low-level out ut output f = 10 kHz, kHz VSTEP = 1 V,, RP = 1 M, CL = 10 pF F Overdrive = 10 mV TYP 25C UNIT 80 Overdrive = 50 mV 55 Overdrive = 2 mV 300 Overdrive = 10 mV MAX 175 25C Overdrive = 50 mV s 60 30 tf Fall time RP = 1 M, CL = 10 pF 25C 5 NOTE: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. s TYPICAL CHARACTERISTICS Table of Graphs FIGURE Input bias/offset current vs Free-air temperature 1 Open collector leakage current vs Free-air temperature 2 VOL IDD Low-level output voltage vs Low-level output current Supply current vs Supply voltage IDD Supply current vs Free-air temperature 3, 4, 5 6 7 Low-to-high level output response for various input overdrives 8, 9, 10 High-to-low level output response for various input overdrives 11, 12, 13 Output fall time vs Supply voltage POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 14 5 TLV3401, TLV3402, TLV3404 FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS SLCS135A - AUGUST 2000 - REVISED NOVEMBER 2000 TYPICAL CHARACTERISTICS 1000 800 IIB 600 400 200 IIO 0 -200 -40 -25 -10 5 20 35 50 65 80 95 110 125 TA - Free-Air Temperature - C 2.7 2400 VID = 1 V 2200 2000 1800 1600 VCC = 15 V 1400 1200 1000 VCC = 2.7 V, 5 V 800 600 400 200 0 -200 -40 -25 -10 5 TA = 70C 2.5 2 TA = 25C TA = 0C TA = -40C 0.5 0 0.4 0.8 1.2 TA = -40C 0.3 0.2 1.6 2.0 2.4 12 0.4 0.5 TA = 70C TA = 25C 7.5 6 4.5 TA = 0C 3 2 TA = 70C 500 TA = 25C 400 TA = 0C 300 TA = -40C 200 100 VID = -1 V 3 4 5 6 7 8 0 9 2 4 Figure 5 500 400 300 8 10 12 14 LOW-TO-HIGH LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES 3 2.5 2 50 mV 1.5 1 2 mV 10 mV 0.5 0 VCC = 2.7 V CL = 10 pF RP = 1 M (Pullup to VCC) TA = 25C 200 100 0 20 35 50 65 80 95 110 125 50 100 150 t - Time - s TA - Free-Air Temperature - C Figure 8 Figure 7 POST OFFICE BOX 655303 16 Figure 6 V O - Output Voltage - V VCC = 2.7 V, 5 V, 15 V VID = -1 V 6 VCC - Supply Voltage - V IOL - Low-Level Output Current - mA 700 0 -40 -25 -10 5 0.8 TA = 125C 0 1 0.7 SUPPLY CURRENT vs SUPPLY VOLTAGE TA = -40C 1.5 0 0.6 600 TA = 125C 9 0 2.8 0.3 Figure 3 SUPPLY CURRENT vs FREE-AIR TEMPERATURE 6 0.1 IOL - Low-Level Output Current - mA 700 10.5 Figure 4 I CC - Supply Current - nA 0.6 0 VCC = 15 V VID = -1 V 13.5 IOL - Low-Level Output Current - mA 600 TA = 0C 0.9 * DALLAS, TEXAS 75265 200 250 0.1 0.05 0 300 V ID - Differential 0 1.2 0.0 I CC - Supply Current - nA VOL - Low-Level Output Voltage - V VOL - Low-Level Output Voltage - V TA = 125C 3.5 1 TA = 25C 1.5 20 35 50 65 80 95 110 125 15 VCC = 5 V VID = -1 V 1.5 1.8 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 5 3 TA = 70C Figure 2 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 4 TA = 125C 2.1 TA - Free-Air Temperature - C Figure 1 4.5 VCC = 2.7 V VID = -1 V 2.4 Input Voltage - V VCC = 15 V VOL - Low-Level Output Voltage - V 1200 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT OPEN COLLECTOR LEAKAGE CURRENT vs FREE-AIR TEMPERATURE I OZ - Open Collector Leakage Current - pA I IB / I IO - Input Bias/Offset Current - pA INPUT BIAS/OFFSET CURRENT vs FREE-AIR TEMPERATURE TLV3401, TLV3402, TLV3404 FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS SLCS135A - AUGUST 2000 - REVISED NOVEMBER 2000 4 3 10 mV 2 mV 1 VCC = 5 V CL = 10 pF RP = 1 M (Pullup to VCC) TA = 25C 50 100 150 200 0.05 0 250 12 50 mV 10 8 6 10 mV 4 2 mV 2 0 VCC = 15 V CL = 10 pF RP = 1 M (Pullup to VCC) TA = 25C 300 0 50 100 V O - Output Voltage - V 3 2.5 2 50 mV 1.5 10 mV 2 mV 0 VCC = 2.7 V CL = 10 pF RP = 1 M (Pullup to VCC) TA = 25C 0.1 0.05 0 Input Voltage - V 0.5 V ID - Differential V O - Output Voltage - V HIGH-TO-LOW LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES 50 6 5 4 50 mV 3 10 mV 2 2 mV 1 0 -1 VCC = 5 V CL = 10 pF RP = 1 M (Pullup to VCC) TA = 25C 0 100 150 200 250 300 350 400 50 100 150 200 250 300 350 400 Figure 12 8 VID= 1 V to -1 V Rp = 1 M (Pullup to VCC) Input Fall Time = 500 ns TA = 25C 50 mV 10 10 mV 6 2 0 VCC = 15 V CL = 10 pF RP = 1 M (Pullup to VCC) TA = 25C 0 50 0.1 0.05 0 Input Voltage - V 2 mV 100 150 200 250 300 350 400 t f - Output Fall Time - s 7 V ID - Differential V O - Output Voltage - V OUTPUT FALL TIME vs SUPPLY VOLTAGE 14 4 0.05 t - Time - s HIGH-TO-LOW LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES 8 0.1 0 Figure 11 12 300 HIGH-TO-LOW LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES t - Time - s 16 250 0 Figure 10 Figure 9 0 200 0.05 t - Time - s t - Time - s 1 150 0.1 Input Voltage - V 0 0.1 V ID - Differential 0 VCC = 15 V CL = 10 pF 14 V ID - Differential 50 mV 2 16 Input Voltage - V 5 LOW-TO-HIGH LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES V ID - Differential V O - Output Voltage - V LOW-TO-HIGH LEVEL OUTPUT RESPONSE FOR VARIOUS INPUT OVERDRIVES Input Voltage - V V O - Output Voltage - V TYPICAL CHARACTERISTICS 6 CL = 50 pF 5 CL = 10 pF 4 3 2 1 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 VCC - Supply Voltage - V t - Time - s Figure 13 Figure 14 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp TLV3401CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401CDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401CDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401CDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401CDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3401IP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLV3401IPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLV3402CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402CDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp TLV3402CDGK ACTIVE VSSOP DGK 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402CDGKG4 ACTIVE VSSOP DGK 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402CDGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402CDGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IDGK ACTIVE VSSOP DGK 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IDGKG4 ACTIVE VSSOP DGK 8 80 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IDGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IDGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3402IP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLV3402IPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLV3404CD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404CDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404CDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 2 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp TLV3404CDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404CPW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404CPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404CPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404CPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404ID ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404IDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404IDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404IDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404IN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLV3404INE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TLV3404IPW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404IPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404IPWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TLV3404IPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 3 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com 16-Aug-2012 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) TLV3401CDBVR SOT-23 DBV 5 3000 180.0 9.0 TLV3401CDBVT SOT-23 DBV 5 250 180.0 TLV3401IDBVR SOT-23 DBV 5 3000 180.0 TLV3401IDBVT SOT-23 DBV 5 250 TLV3401IDR SOIC D 8 TLV3402CDGKR VSSOP DGK TLV3402CDR SOIC D TLV3402IDGKR VSSOP DGK W Pin1 (mm) Quadrant 3.15 3.2 1.4 4.0 8.0 Q3 9.0 3.15 3.2 1.4 4.0 8.0 Q3 9.0 3.15 3.2 1.4 4.0 8.0 Q3 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 TLV3402IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 TLV3404CDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TLV3404CPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 TLV3404IDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 TLV3404IPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 16-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TLV3401CDBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TLV3401CDBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TLV3401IDBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TLV3401IDBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TLV3401IDR SOIC D 8 2500 340.5 338.1 20.6 TLV3402CDGKR VSSOP DGK 8 2500 364.0 364.0 27.0 TLV3402CDR SOIC D 8 2500 340.5 338.1 20.6 TLV3402IDGKR VSSOP DGK 8 2500 364.0 364.0 27.0 TLV3402IDR SOIC D 8 2500 533.4 186.0 36.0 TLV3404CDR SOIC D 14 2500 333.2 345.9 28.6 TLV3404CPWR TSSOP PW 14 2000 367.0 367.0 35.0 TLV3404IDR SOIC D 14 2500 333.2 345.9 28.6 TLV3404IPWR TSSOP PW 14 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated