Silizium-PIN-Fotodiode Silicon PIN Photodiode Lead (Pb) Free Product - RoHS Compliant SFH 206 K Wesentliche Merkmale Features * Speziell geeignet fur Anwendungen im Bereich von 400 nm bis 1100 nm * Kurze Schaltzeit (typ. 20 ns) * 5-mm-Plastikbauform im LED-Gehause * Auch gegurtet lieferbar * Especially suitable for applications from 400 nm to 1100 nm * Short switching time (typ. 20 ns) * 5 mm LED plastic package * Also available on tape and reel Anwendungen Applications * Computer-Blitzlichtgerate * Lichtschranken fur Gleich- und Wechsellichtbetrieb * Industrieelektronik * Messen/Steuern/Regeln" * * * * Typ Type Bestellnummer Ordering Code SFH 206 K Q62702P0129 2005-02-21 1 Computer-controlled flashes Photointerrupters Industrial electronics For control and drive circuits SFH 206 K Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Sperrspannung Reverse voltage VR 32 V Verlustleistung, TA = 25 C Total power dissipation Ptot 150 mW Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Fotoempfindlichkeit, VR = 5 V Spectral sensitivity S 80 ( 50) nA/Ix Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 850 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 400 ... 1100 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 7.00 mm2 2.65 x 2.65 mm x mm Abmessung der bestrahlungsempfindlichen Flache L x B Dimensions of radiant sensitive area Lx W Halbwinkel Half angle 60 Grad deg. Dunkelstrom, VR = 10 V Dark current IR 2 (30) nA Spektrale Fotoempfindlichkeit, = 850 nm Spectral sensitivity S 0.62 A/W Quantenausbeute, = 850 nm Quantum yield 0.90 Electrons Photon Leerlaufspannung, Ev = 1000 Ix Open-circuit voltage VO 365 ( 310) mV Kurzschlustrom, Ev = 1000 Ix Short-circuit current ISC 80 A 2005-02-21 2 SFH 206 K Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 ; VR = 5 V; = 850 nm; Ip = 800 A tr , tf 20 ns Durchlaspannung, IF = 100 mA, E = 0 Forward voltage VF 1.3 V Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 72 pF Temperaturkoeffizient von VO Temperature coefficient of VO TCV - 2.6 mV/K Temperaturkoeffizient von ISC Temperature coefficient of ISC TCI 0.18 %/K Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 10 V, = 850 nm NEP 4.2 x 10- 14 Nachweisgrenze, VR = 10 V, = 850 nm Detection limit D* 6.3 x 1012 2005-02-21 3 W -----------Hz cm x Hz --------------------------W SFH 206 K Photocurrent IP = f (Ev), VR = 5 V Open-Circuit Voltage VO = f (Ev) Relative Spectral Sensitivity Srel = f () OHF00078 100 Total Power Dissipation Ptot = f (TA) OHF00394 160 mW Ptot 140 S rel % 80 120 100 60 80 40 60 40 20 20 0 400 500 600 700 800 900 nm 1100 0 Dark Current IR = f (VR), E = 0 Capacitance C = f (VR), f = 1 MHz, E = 0 0 20 40 60 80 C 100 TA Dark Current IR = f (TA), VR = 10 V, E = 0 OHF00082 10 3 R nA 10 2 10 1 10 0 10 -1 Directional Characteristics Srel = f () 40 30 20 10 0 OHF01402 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 1.0 2005-02-21 0.8 0.6 0.4 0 20 40 60 80 4 100 120 0 20 40 60 80 C 100 TA SFH 206 K Mazeichnung Package Outlines Area not flat 6.9 (0.272) 0.6 (0.024) x 0.5 (0.020) 0.4 (0.016) x 0.3 (0.012) 1.8 (0.071) 1.2 (0.047) 5.1 (0.201) 4.0 (0.157) 34 (1.339) 32 (1.260) 4.7 (0.185) Cathode 2.54 (0.100) spacing 0.8 (0.031) 0.4 (0.016) 6.3 (0.248) 0.8 (0.031) Radiant sensitive area 4.1 (0.161) 3.7 (0.146) GEOY6647 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2005-02-21 5 s 250 SFH 206 K Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2005-02-21 6