SPECIFICATION * Supplier : Samsung electro-mechanics * Samsung P/N : CL32A106KOMLNNE * Product : Multi-layer Ceramic Capacitor * Description : CAP, 10, 16V, 10%, X5R, 1210 A. Samsung Part Number Series Size Dielectric Capacitance Capacitance CL 32 A 106 K O M L N N E Samsung Multi-layer Ceramic Capacitor 1210 (inch code) L: 3.2 0.3 X5R 10 10 % 16 V 1.15 0.1 mm mm Low profile Ni Termination Cu Plating Sn 100% (Pb Free) Normal Product Rated Voltage 2.5 0.2 W: Thickness division Inner electrode tolerance Thickness mm Special Reserved for future use Packaging Embossed Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance Capacitance Tan (DF) Insulation Within specified tolerance Test condition 110% 1.00.2 Vrms 60~120 sec. 0.1 max. 10,000Mohm or 100Mohm Whichever is Smaller Rated Voltage Resistance Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) Humidity Capacitance change : within 12.5% 402, 90~95%RH, 500+12/-0hrs Tan : 0.125 max IR : 25* or Over Moisture Capacitance change : Resistance Tan : 0.125 max IR : 402, 90~95%RH, 500+12/-0hrs 12.5* or Over High Temperature Capacitance change : Resistance Tan : 0.125 max IR : within 12.5% With rated voltage within 12.5% With 150% of The rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.