9C06034A1305JLT - Yageo USA - Datasheet.Technology

DATA SHEE

GENERAL PURPOSE CHIP RESISTORS

RC0603

5%, 1%

RoHS complian

Product specification – Apr 24, 2009 V.4 Supersedes Date of Mar. 06, 2003

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

GLOBAL PART NUMBER (PREFERRED)

RC0603 X R - XX XXXX L

(1) (2) (3) (4) (5) (6)

(1) TOLERANCE

F = ±1%

J = ±5% (for Jumper ordering, use code of J)

(2) PACKAGING TYPE

R = Paper / PE taping reel

(3) TEMPERATURE COEFFICIENT OF RESISTANCE

– = Base on spec

(4) TAPING REEL

07 = 7 inch dia. Reel

10 = 10 inch dia. Reel

13 = 13 inch dia. Reel

(5) RESISTANCE VALUE

There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need

to mention the last zero after R/K/M, e.g.1K2, not 1K20.

Detailed resistance rules show in table of “Resistance rule of global part number”.

(6) OPTIONAL CODE

L = optional symbol (Note)

ORDERING INFORMATION -

GLOBAL PART NUMBER & 12NC

Both part numbers are identified by the series, size, tolerance, packing

type, temperature coefficient, taping reel and resistance value.

SCOPE

This specification describes

RC0603 series chip resistors

with lead-free terminations made

by thick film process.

APPLICATIONS

 All general purpose application

FEATURES

 RoHS compliant

- Products with lead free

terminations meet RoHS

requirements

- Pb-glass contained in electrodes,

resistor element and glass are

exempted by RoHS

 Reducing environmentally

hazardous wastes

 High component and equipment

reliability

 Saving of PCB space

 None forbidden-materials used

in products/production

 Halogen Free Epoxy

ORDERING EXAMPLE

The ordering code of a RC0603

chip resistor, value 56 X with

±1% tolerance, supplied in 7-inch

tape reel is: RC0603FR-0756R(L).

NOTE

1. All our RSMD products meet RoHS

compliant. "LFP" of the internal 2D reel

label mentions "Lead Free Process"

2. On customized label, "LFP" or specific

symbol printed and the optional "L" at

the end of GLOBAL PART NUMBER /

12NC can be added (both are on

customer request)

Resistance rule of

global part

number

Resistance code rule

Example

0R 0R = Jumpe

XRXX

(1 to 9.76 Ω)

1R = 1 Ω

1R5 = 1.5 Ω

9R76 = 9.76 Ω

XXRX

(10 to 97.6 Ω)

10R = 10 Ω

97R6 = 97.6 Ω

XXXR

(100 to 976 Ω) 100R = 100 Ω

XKXX

(1 to 9.76 KΩ)

1K = 1,000 Ω

9K76 = 9760 Ω

XMXX

(1 to 9.76 MΩ)

1M = 1,000,000 Ω

9M76= 9,760,000 Ω

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp

brand products.

GLOBAL PART NUMBER (PREFERRED)

For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.

(1) The resistors have a 12-digit ordering code starting with 2322 / 2350.

(2) The subsequent 4 or 5 digits indicate the resistor tolerance and

packaging.

(3) The remaining 4 or 3 digits represent the resistance value with the

last digit indicating the multiplier as shown in the table of

“Last digit of 12NC”.

(4) "L" is optional symbol (Note).

ORDERING EXAMPLE

The ordering code of a RC22 resistor, value 56 X with ±1% tolerance,

supplied in tape of 5,000 units per reel is: 232270465609(L) or

RC0603FR-0756R(L).

Resistance decade (3) Last digit

0.01 to 0.0976 X 0

0.1 to 0.976 X 7

1 to 9.76 X 8

10 to 97.6 X 9

100 to 976 X 1

1 to 9.76 KX 2

10 to 97.6 KX 3

100 to 976 KX 4

1 to 9.76 MX 5

10 to 97.6 MX 6

Example: 0.02

X = 0200 or 200

0.3 X = 3007 or 307

X = 1008 or 108

33 KX = 3303 or 333

10 MX = 1006 or 106

Last digit of 12NC

NOTE

1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"

2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added

(both are on customer request)

12NC CODE

2322 / 2350 XXX XXXXX L

(1) (2) (3) (4)

PAPER / PE TAPE ON REEL (units) (2)

TYPE/

START

IN (1)

TOL.

(%)

RESISTANCE

RANGE

5,000 10,000/not preferred

20,000

RC21

2322 ±5% 1 to 10 MΩ 702 60xxx 702 70xxx 702 81xx

RC22

2322 ±1% 1 to 10 MΩ 704 6xxxx 704 7xxxx 704 8xxx

HRC21

2350 ±5% 11 to 22 MΩ 522 10xxx - -

Jumper

2322 - 0 Ω 702 96001

702 97001 702 9200

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

CONSTRUCTION

The resistor is constructed on top

of a high-grade ceramic body.

Internal metal electrodes are added

on each end to make the contacts to

the thick film resistive element. The

composition of the resistive element

is a noble metal imbedded into a

glass and covered by a second glass

to prevent environment influences.

The resistor is laser trimmed to the

rated resistance value. The resistor

is covered with a protective epoxy

coat, finally the two external

terminations (matte tin on Ni-

barrier) are added. See fig.4

DIMENSIONS

TYPE RC0603

L (mm) 1.60 ±0.10

W (mm) 0.80 ±0.10

H (mm) 0.45 ±0.10

I1 (mm) 0.25 ±0.15

I2 (mm) 0.25 ±0.15

Table 1

overcoat

Primary glass layer

resistive layer

(Jumper chip is a conductor)

inner electrode

termination(Ni/matte tin)

ceramic substrate

YNSC065

marking layer

overcoat

For dimension see Table

Fig. 4

Chip resistor outlines

MARKING

RC0603

E-24 series: 3 digits

First two digits for significant figure and 3rd digit

for number of zeros

E-96 series: 3 digits for 0603 ±1% EIA-96 marking

method

For 0603 ±1% E-24 series, one short bar under

marking letter

For further marking information, please see special data sheet “Chip resistors marking”.

Fig. 1 Value = 10 KΩ

YNSC001

Fig. 2 Value = 12.4 KΩ

Fig. 3 E-24 1% Value = 56 KΩ

ynsc003

563

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

ELECTRICAL CHAR

CTERISTICS

CHARACTERISTICS RC0603 1/10 W

Operating Temperature Range –55 °C to +155 °C

Maximum Working Voltage 50 V

Maximum Overload Voltage 100 V

Dielectric Withstanding Voltage 100 V

5% (E24) 1 Ω to 22 MΩ

1% (E24/E96) 1 Ω to 10 MΩ

Resistance Range

Zero Ohm Jumper < 0.05 Ω

1 Ω ≤ R ≤ 10Ω±200 ppm/°C

10 MΩ < R ≤ 22 MΩ±200 ppm/°C

Temperature Coefficient

10 Ω < R ≤ 10 MΩ±100 ppm/°C

Rated Current 1.0 A

Jumper Criteria Maximum Current 2.0 A

FOOTPRINT AND SOLDERING

PROFILES

For recommended footprint and

soldering profiles, please see the

special data sheet “Chip resistors

mounting”.

Table 2

PACKING STYLE AND P

CKAGING QUANTITY

PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL

RC0603 Paper Taping Reel (R) 7" (178 mm) 5,000 units

10" (254 mm) 10,000 units

13" (330 mm) 20,000 units

NOTE

1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.

Table 3 Packing style and packaging quantity

MLB206_2

70 10055 50

amb( C)

(%P )

rated

100

155

handbook, halfpage

FUNCTIONAL DESCRIPTION

RC0603 rated power at 70°C is 1/10 W

RATED VOLTAGE

The DC or AC (rms) continuous working voltage

corresponding to the rated power is determined by

the following formula:

V=√(P X R)

or max. working voltage whichever is less

Where

V=Continuous rated DC or

AC (rms) working voltage (V)

P=Rated power (W)

R=Resistance value (X)

Fig. 5

Maximum dissipation (P) in percentage of rated power as a

function of the operating ambient temperature (Tamb)

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

TESTS AND REQUIREMENTS

TEST TEST METHOD PROCEDURE REQUIREMENTS

At +25/–55 °C and +25/+125 °C Temperature

Coefficient of

Resistance

(T.C.R.)

IEC 60115-1 4.8

Formula:

T.C.R= ------------------------- × 106 (ppm/°C)

Where

t1=+25 °C or specified room temperature

t2=–55 °C or +125 °C test temperature

R1=resistance at reference temperature in ohms

R2=resistance at test temperature in ohms

Refer to table 2

Life/Endurance IEC 60115-1 4.25.1

1,000 hours at 70±5 °C applied RCWV

1.5 hours on, 0.5 hour off, still air required

±(1.0%+0.05 Ω) for 1% tol.

±(3.0%+0.05 Ω) for 5% tol.

<100 mΩ for Jumper

High

Temperature

Exposure/

Endurance at

Upper Category

Temperature

IEC 60068-2-2 1,000 hours at 155±5 °C, unpowered ±(1.0%+0.05 Ω) for 1% tol.

±(2.0%+0.05 Ω) for 5% tol.

<50 mΩ for Jumper

Moisture

Resistance

MIL-STD-202G Method-106G Each temperature / humidity cycle is defined at 8

hours, 3 cycles / 24 hours for 10d. with 25 °C /

65 °C 95% R.H, without steps 7a & 7b,

unpowered

Parts mounted on test-boards, without

condensation on parts

Measurement at 24±2 hours after test conclusion

±(0.5%+0.05 Ω) for 1% tol.

±(2.0%+0.05 Ω) for 5% tol.

<100 mΩ for Jumper

Thermal Shock MIL-STD-202G Method-107G -55/+125 °C

Number of cycles required is 300. Devices

unmounted

Maximum transfer time is 20 seconds. Dwell time

is 15 minutes. Air – Air

±(0.5%+0.05 Ω) for 1% tol.

±(1%+0.05 Ω) for 5% tol.

<50 mΩ for Jumper

Short Time

Overload

IEC60115-1 4.13 2.5 times of rated voltage or maximum overload

voltage whichever is less for 5 sec at room

temperature

±(1.0%+0.05 Ω) for 1% tol.

±(2.0%+0.05 Ω) for 5% tol.

<50 mΩ for Jumper

No visible damage

Table 4 Test condition, procedure and requirements

R2–R1

R1(t2–t1)

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

TEST TEST METHOD PROCEDURE REQUIREMENTS

Board Flex/

Bending

IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin

PCB (FR4)

3 mm bending

Bending time: 60±5 seconds

±(1.0%+0.05 Ω) for 1%, 5% tol.

<50 mΩ for Jumper

No visible damage

Low

Temperature

Operation

IEC 60068-2-1 The resistor shall be subjected to a DC rated

voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C

This constitutes shall be repeated for 96 hours

However the applied voltage shall not exceed

the maximum operating voltage

±(0.5%+0.05 Ω) for 1% tol .

±(1.0%+0.05 Ω) for 5% tol.

No visible damage

Insulation

Resistance

IEC 60115-1 4.6 Rated continuous overload voltage (RCOV)

for 1 minute

Type RC0603

Voltage (DC) 100 V

≥10 GΩ

Dielectric

Withstand

Voltage

IEC 60115-1 4.7 Maximum voltage (Vrms) applied for 1 minute

Type RC0603

Voltage (AC) 100 Vrms

No breakdown or flashover

Resistance to

Solvent

IPC/JEDEC J-STD-020D lsopropylalcohol (C3H7OH) followed by

brushing

No smeared

Noise IEC 60115-1 4.12 Maximum voltage (Vrms) applied Resistors range

alue

R < 100 Ω 10 dB

100 Ω ≤ R < 1 KΩ 20 dB

1 KΩ ≤ R < 10 KΩ 30 dB

10 KΩ ≤ R < 100 KΩ

40 dB

100 KΩ ≤ R < 1 MΩ

46 dB

1 MΩ ≤ R ≤ 22 MΩ

48 dB

Biased Humidity

(steady state)

IEC 60115-1 4.37 Steady state for 1000 hours at 85 °C / 85% R.H.

Biased voltage: U = 10% of Pn (V)

Max = Umax.

No condensation on the devices, circulating air

±(1.0%+0.05 Ω) for 1% tol.

±(2.0%+0.05 Ω) for 5% tol.

<100 mΩ for Jumper

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

TEST TEST METHOD PROCEDURE REQUIREMENTS

Intermittent

Overload

IEC 60115-1 4.39 2.5 times of rated voltage or maximum

overload voltage whichever is less for 1 second

on and 25 seconds off; total 10,000 cycles

±(1.0%+0.05 Ω) for 1% tol.

±(2.0%+0.05 Ω) for 5% tol.

<100 mΩ for Jumper

Solderability

- Wetting

IPC/JEDEC J-STD-002B test B

Electrical Test not required

Magnification 50X

SMD conditions:

1st step: method B, aging 4 hours at 155 °C

dry heat

2nd step: leadfree solder bath at 245±3 °C

Dipping time: 3±0.5 seconds

Well tinned (≥95% covered)

No visible damage

- Leaching IPC/JEDEC J-STD-002B test D

Leadfree solder, 260 °C, 30 seconds

immersion time

No visible damage

- Resistance to

Soldering Heat

IEC 60068-2-58 Condition B, no pre-heat of samples

Leadfree solder, 260 °C, 10 seconds

immersion time

Procedure 2 for SMD: devices fluxed and

cleaned with isopropanol

±(0.5%+0.05 Ω) for 1% tol .

±(1.0%+0.05 Ω) for 5% tol.

<50 mΩ for Jumper

No visible damage

Chip Resistor Surface Mount

ww.yageo.com

Apr 24, 2009 V.4

Product specification

SERIES

0603 (RoHS Compliant)

“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any

product change will be announced by PCN.”

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION

Version 4 Apr 24, 2009 - - Test Items and methods updated

- Test requirements upgraded

Version 3 Jul 15, 2008 - - Change to dual brand datasheet that describe RC0603 with RoHS compliant

- Description of "Halogen Free Epoxy" added

- Define global part number

Version 2 Aug 19, 2004 -

Version 1 Aug 02, 2004 - - New datasheet for 0603 thick film 1% and 5% with lead-free terminations

- Replace the 0603 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10,

and HRC21_5_4

- Test method and procedure updated

- PE tape added (paper tape will be replaced by PE tape)

- High ohmic products combined into standard products.

PHYCOMP - YAGEO CORPORATION

Composition of The Clear Text Code (R-Chip) Version: 17 01-21-02

1234567891011121314151617

xxxxxxxxxxxxxxxxx

PHYCOMP Code

9C Phycomp Thick Film Chip Res

Phycomp Thin Film Chip Res

Size Packaging

0201 0201 ( 0603 )

5K Paper

0402 0402 ( 1005 ) 310K Paper

0603 0603 ( 1608 ) 420K Paper

0805 0805 ( 2012 ) 54K Blister

1210 1210 ( 3225 ) 65K Blister

1206 1206 ( 3216 ) 750K Paper

1218 1218 ( 3248 ) P25K Bulk Case

2010 2010 ( 5025 )

2512 2512 ( 6432 )

4527 4527 ( 11070 )

AC3

0603 (1608) x 4 concave array ARC241 / 242 Special Coding

AV3

0603 (1608) x 4 convex array ARV241 / 242 HF PPCK, Sn/Pb

AV2

0402 (1005) x 2 convex array ARV321 / 322 PF 100% Sn 2372

AV2

0402 (1005) x 4 convex array ARV341 A

NiAu

AC2

0402 (1005) x 4 concave array ARC341

AV2

0402 (1005) x 8 convex array ARV381 / 382

RN31 10P8R in 1206 convex network RNA310

RC21 10P4C4R in 1608 concave network RCB210 TCR

FR01 1206 (3216) Fusible

25 ppm/’C

FR21 0603 (1608) Fusible B50 ppm/’C

SR01 1206 (3216) Surge

100 ppm/’C

VR01 1206 (3216) High Voltage 5% L200 ppm/’C

VR02 1206 (3216) High Voltage 1% E250 ppm/’C

Power Rating M300 ppm/’C

1/16W 0.063 W 0402 G500 ppm/’C

1/10W 0.1 W 0603 Upgraded from 1/16W P 750 ppm/’C

1/8 W 0.125 W 0805 H1000 ppm/’C

1/4 W 0.25 W 1206 I1500 ppm/’C

1/10 W 0.1 W 0603 J2000 ppm/’C

1/3W 0.3W N3000 ppm/’C

1/20 W 0.05 W 0201

1/32 W 0.03125 W RNA310

12 1/2 W 0.5 W 2010

1W 1 W 1 W 1218 / 2512 Tolerance

2W 2 W 2 W

±0.05%

B±0.1%

Resistance Value C±0.25%

0R00 Jumper 6 D±0.5 %

R0x

< 1R 0 Example: F±1%

Rxx

< 1R 7 Rchip 0603 (RC22H), 10R0, 1%, 5K reel = G±2%

xRx

1R - 9.76R 8 9C06031A10R0FKHF

J±5%

xxR

10R - 97.6R 9 N 0 / 20%

xxx0 100R - 976R 1R-chip Array R0 / 30%

xxx1 1K - 9.76K 2A = Array

xxx2 10K - 97.6K 3V = Convex C = Concave

xxx3 100K - 976K 43 = 0603 2 = 0402

xxx4 1M - 9.76M 54 = 4 Res. 2 = 2 Res.

xxx5 10M - 97.6M 6

xxx6 100M+ 7

Nxxx marking code

for RCB210

Yageo America Corp HQ 16750 West Grove Dr. Suite 600 Addison, TX 75001-5156 Tel: 214-561-2020 Fax: 214-561-2019

1210