
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of
TT electronics plc
• 4222 South Staples Street • Corpus Christi Texas 78411 USA
Wire and Film Technologies Division
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
RL Series
• MIL-R-22684
• ±200 ppm/°C
• 1/4 watt to 1/2 watt
• 2% and 5% tolerance
• 4.3 ohms to 470K ohms
Semi-Precision Mil-Qualified
Metal Glaze™ Resistor
Electrical Data
MIL
Type Marking Tolerance
(±%)
T.C.
(ppm/°C)
Power Rating
(watts)
Resistance
Range
(ohms)*
Nominal
Size
Max Voltage
Rating
RL07 Band 2, 5 200 1/4 @ 70°C 51 to 150K 1/4W 250
RL20 Band 2, 5 200 1/2 @ 70°C 4.3 to 470K 1/2W 350
* For values below or above Mil Resistance, the Non-Mil part can be used. But keep in mind -- it is a non-mil part.
Test Conditions MIL-R-22684 Test
Limits Allowed
RL07 Max.
%∆R (±3σ)
Temperature Coefficient (ppm/°C) ±200 ±200
Low Temperature Operation ±0.50% ±0.10%
Thermal Shock ±1.00% ±0.15%
Moisture Resistance ±1.5% ±0.05%
Short Time Overload ±0.50% ±0.10%
Load Life (70°C --- 1/4W) 1000 hours ±2.00% ±0.40%
Terminal Strength ±0.50% ±0.10%
Effect of Soldering ±0.50% ±0.10%
Shock ±0.50% ±0.05%
Vibration ±0.50% ±0.05%
High Temperature Exposure (150°C No Load) N/A ±0.75%
Rated Power for 10,000 hours at 70°C N/A ±0.60%
Temperature Rise @ 1/4W Power Load - See Temperature Rise Chart
Dielectric Strength ±0.50% ±0.05%
Environmental Data
Tough molded jacket
Metal Glaze thick film element
fired at 1000°C to solid
ceramic core
Tin-lead electroplated copper leads
Spiraled or laser
helixed to
resistance value,
tolerance
High temperature
soldered termination-lead
assembly
RL Series Issue November 2008 Sheet 1 of 3