SFH610A, SFH6106 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES * Good CTR linearity depending on forward current * Isolation test voltage, 5300 VRMS * High collector emitter voltage, VCEO = 70 V A 1 4 E C 2 3 C * * * * * * * * Low saturation voltage Fast switching times Low CTR degradation Temperature stable Low coupling capacitance End stackable, 0.100" (2.54 mm) spacing High common mode interference immunity Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 AGENCY APPROVALS DESCRIPTION * UL1577, file no. E52744 system code H or J, double protection * DIN EN 60747-5-5 (VDE 0884) available with option 1 * BSI IEC 60950; IEC 60065 * CSA 93751 The SFH610A and SFH6106 feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6 and option 8. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC. Specifications subject to change. ORDERING INFORMATION S F H 6 1 PART NUMBER 0 x - # CTR BIN X 0 # # PACKAGE OPTION DIP-6 Option 6 7.62 mm 10.16 mm T TAPE AND REEL Option 7 Option 8 9.27 mm > 0.7 mm AGENCY CERTIFIED/PACKAGE UL, BSI, CSA 40 to 80 63 to 125 DIP-4 SFH610A-1 SFH610A-2 DIP-4, 400 mil SFH610A-2X006 SMD-4 SFH6106-1T SFH6106-2T SMD-4, option 7 SMD-4, 400 mil, option 8 VDE, UL, BSI, CSA (option 1) 40 to 80 63 to 125 DIP-4 SFH610A-1X001 SFH610A-2X001 DIP-4, 400 mil SFH610A-1X016 SMD-4 SFH6106-1X001T SFH6106-2X001T SMD-4, 400 mil, option 8 SFH610A-1X018T Note * For additional information on the available options refer to option information CTR (%) 100 to 200 SFH610A-3 SFH610A-3X006 SFH6106-3T SFH610A-3X007T 100 to 200 SFH610A-3X001 SFH610A-3X016 SFH6106-3X001T - 160 to 320 SFH610A-4 SFH6106-4T SFH610A-4X008T 160 to 320 SFH610A-4X001 SFH610A-4X016 SFH6106-4X001T - 250 to 500 SFH610A-5 SFH6106-5T 250 to 500 - Document Number: 83666 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 SFH610A, SFH6106 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT VR IF IFSM Pdiss 6 60 2.5 100 V mA A mW VCEO VECO IC IC Pdiss 70 7 50 100 150 V V mA mA mW Tstg Tamb -55 to +150 -55 to +100 C C Tsld 260 C INPUT Reverse voltage DC forward current Surge forward current Power dissipation OUTPUT Collector emitter voltage Emitter collector voltage t 10 s Collector current tp 1.0 ms Power dissipation COUPLER Storage temperature range Ambient temperature range Soldering temperature (1) max. 10 s, dip soldering distance to seating plane 1.5 mm Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 60 mA VF - 1.25 1.65 V Reverse current VR = 6 V IR - 0.01 10 A Capacitance VR = 0 V, f = 1 MHz Thermal resistance CO - 13 - pF Rthja - 750 - K/W OUTPUT Collector emitter capacitance VCE = 5 V, f = 1 MHz CCE - 5.2 - pF Rthja - 500 - K/W SFH610A-1 ICEO - 2 50 nA SFH6106-1 ICEO - 2 50 nA SFH610A-2 ICEO - 2 50 nA SFH6106-2 ICEO - 2 50 nA SFH610A-3 ICEO - 5 100 nA SFH6106-3 ICEO - 5 100 nA SFH610A-4 ICEO - 5 100 nA SFH6106-4 ICEO - 5 100 nA SFH610A-5 ICEO - 5 100 nA SFH6106-5 ICEO - 5 100 nA IF = 10 mA, IC = 2.5 mA VCEsat - 0.25 0.4 V f = 1 MHz CC - 0.4 - pF Thermal resistance Collector emitter leakage current VCE = 10 V COUPLER Collector emitter saturation voltage Coupling capacitance Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Document Number: 83666 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 SFH610A, SFH6106 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 10 mA, VCE = 5.0 V IC/IF IF = 1 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX. UNIT SFH610A-1 CTR 40 - 80 % SFH6106-1 CTR 40 - 80 % SFH610A-2 CTR 63 - 125 % SFH6106-2 CTR 63 - 125 % SFH610A-3 CTR 100 - 200 % SFH6106-3 CTR 100 - 200 % SFH610A-4 CTR 160 - 320 % SFH6106-4 CTR 160 - 320 % SFH610A-5 CTR 250 - 500 % SFH6106-5 CTR 250 - 500 % SFH610A-1 CTR 13 30 - % SFH6106-1 CTR 13 30 - % SFH610A-2 CTR 22 45 - % SFH6106-2 CTR 22 45 - % SFH610A-3 CTR 34 70 - % SFH6106-3 CTR 34 70 - % SFH610A-4 CTR 56 90 - % SFH6106-4 CTR 56 90 - % PART SYMBOL MIN. TYP. MAX. UNIT SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION NON-SATURATED Current VCC = 5 V, RL = 75 IF - 10 - mA Rise time VCC = 5 V, RL = 75 tr - 2 - s Fall time VCC = 5 V, RL = 75 tf - 2 - s Turn-on time VCC = 5 V, RL = 75 ton - 3 - s Turn-off time VCC = 5 V, RL = 75 toff - 2.3 - s VCC = 5 V FCO - 250 - kHz IF - 20 - mA IF - 10 - mA IF - 10 - mA IF - 5 - mA tr - 2 - s tr - 3 - s tr - 3 - s tr - 4 - s Cut-off frequency SATURATED SFH610A-1 SFH6106-1 SFH610A-2 Current SFH6106-2 SFH610A-3 SFH6106-3 SFH610A-4 SFH6106-4 SATURATED SFH610A-1 SFH6106-1 SFH610A-2 Rise time SFH6106-2 SFH610A-3 SFH6106-3 SFH610A-4 SFH6106-4 Document Number: 83666 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 SFH610A, SFH6106 www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT tf - 11 - s tf - 14 - s tf - 14 - s tf - 15 - s ton - 3 - s ton - 4.2 - s ton - 4.2 - s ton - 6 - s toff - 18 - s toff - 23 - s toff - 23 - s toff - 25 - s SFH610A-1 SFH6106-1 SFH610A-2 Fall time SFH6106-2 SFH610A-3 SFH6106-3 SFH610A-4 SFH6106-4 SFH610A-1 SFH6106-1 SFH610A-2 Turn-on time SFH6106-2 SFH610A-3 SFH6106-3 SFH610A-4 SFH6106-4 SFH610A-1 SFH6106-1 SFH610A-2 Turn-off time SFH6106-2 SFH610A-3 SFH6106-3 SFH610A-4 SFH6106-4 Note * All values presented are typical values. SAFETY AND INSULATION RATINGS PARAMETER Climatic classification Comparative tracking index TEST CONDITION SYMBOL According to IEC 68 part 1 VALUE UNIT 55 / 100 / 21 Insulation group IIIa CTI 175 According to UL1577, t = 1 min VISO 4420 VRMS Tested withstanding isolation voltage According to UL1577, t = 1 s VISO 5300 VRMS Maximum transient isolation voltage According to DIN EN 60747-5-5 VIOTM 10 000 V Maximum repetitive peak isolation voltage According to DIN EN 60747-5-5 VIORM 890 V VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 PSO 400 mW Input safety current ISI 275 mA Input safety temperature TSI 175 C 7 mm 7 mm Maximum rated withstanding isolation voltage Isolation resistance Output safety power Creepage distance Clearance distance Creepage distance Clearance distance Insulation thickness DIP-4 / SMD-4 DIP-4, 400 mil / SMD-4, 400 mil DTI 8 mm 8 mm 0.4 mm Note * As per IEC 60747-5-5, 7.4.3.8.2, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Document Number: 83666 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 SFH610A, SFH6106 www.vishay.com Vishay Semiconductors IF - Forward Current (mA) 100 Tamb = 110 C Tamb = 75 C Tamb = 25 C Tamb = 0 C Tamb = -55 C 10 1 0.1 0.6 0.8 1.0 1.2 1.4 1.6 NCTR - Normalized CTR (non-saturated) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1.2 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 10 mA, VCE = 5 V, Tamb = 25 C -60 -40 -20 VF - Forward Voltage (V) 40 60 80 100 120 Fig. 4 - Normalized Current Transfer Ratio (non-saturated) vs. Ambient Temperature 1.2 55 IF = 35 mA 50 NCTR - Normalized CTR (sat) IC - Collector Current (mA) 20 Tamb - Ambient Temperature (C) Fig. 1 - Forward Voltage vs. Forward Current 45 IF = 30 mA 40 35 IF = 25 mA 30 IF = 20 mA 25 20 IF = 15 mA 15 10 IF = 10 mA IF = 1 mA 5 IF = 5 mA 0 1 2 3 4 5 6 7 8 1.0 0.8 0.6 0.4 0.2 0 0 9 Normalized to CTR value: IF = 10 mA, VCE = 5 V, Tamb = 25 C -60 -40 -20 10 VCE - Collector Emitter Voltage (non-sat) (V) Fig. 2 - Collector Current vs. Collector Emitter Voltage (NS) 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) Fig. 5 - Normalized Current Transfer Ratio (saturated) vs. Ambient Temperature 14 1.4 IF = 10 mA NCTR - Normalized CTR (NS) IC - Collector Current (mA) 0 12 10 8 IF = 5 mA 6 4 IF = 1 mA IF = 2 mA 2 0 Tamb = 0 C 1.2 Tamb = -55 C Tamb = 25 C 1.0 0.8 0.6 Tamb = 75 C 0.4 Tamb = 100 C Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 C 0.2 0 0 0.1 0.2 0.3 0.4 VCE - Collector Emitter Voltage (sat.) (V) Fig. 3 - Collector Current vs. Collector Emitter Voltage (saturated) 0.1 1 10 100 IF - Forward Current (mA) Fig. 6 - Normalized CTR (non-saturated) vs. Forward Current Document Number: 83666 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 SFH610A, SFH6106 www.vishay.com Vishay Semiconductors 1000 VCE = 0.4 V Normalized to: IF = 5 mA, VCE = 5 V, Tamb = 25 C 1.0 0.8 Tamb = 0 C VCE = 5 V, IF = 5 mA Tamb = - 55 C 0.6 0.4 Tamb = 25 C 0.2 Tamb = 75 C Tamb = 100 C 0 0.1 1 ton, toff Switching Time (s) NCTR - Normalized CTR (sat) 1.2 100 10 1 0 100 IF - Forward Current (mA) VCE = 5 V RL = 100 Phase Angle (deg) -60 -80 -100 RL = 1000 -140 -160 1 10 100 10 15 20 1000 Fig. 10 - Switching Time vs. Load Resistance VCEsat - Collector Emitter Voltage (V) 0 -120 5 RL - Load Resistance (k) Fig. 7 - Normalized CTR (saturated) vs. Forward Current -40 ton (s) 0.1 10 -20 toff (s) 0.40 0.35 IF = 10 mA 0.30 Ic = 5 mA 0.25 0.20 Ic = 2 mA 0.15 0.10 0.05 Ic = 1 mA 0 -60 -40 -20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (C) f - Frequency (kHz) Fig. 8 - Phase Angle vs. Frequency Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature (saturated) 1000 FCTR (kHz) VCC = 5 V 100 10 1 0.1 1 10 100 IC (mA) Fig. 9 - CTR Frequency vs. Collector Current Document Number: 83666 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 SFH610A, SFH6106 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 6.81 6.48 Pin 1 identification 4.83 4.55 7.62 typ. ISO Method A 10 0.84 0.74 1.14 0.76 3.81 3.30 4 typ . 6.35 5.84) 3.30 2.79 0.89 0.51 0 to 15 1.32 1.22 0.25 typ. 2.67 2.41 i178027-1 SMD 0.268 (6.81) 0.255 (6.48) 0.190 (4.83) 0.179 (4.55) PIN 1 IDENTIFICATION 0.030 (0.76) 0.100 (2.54) R 0.010 (0.25) 0.070 (1.78) 0.315 (8.00) mi n. 0.435 (11.05) 0.045 (1.14) 0.030 (0.76) 0.060 (1.52) 0.395 (10.03) 0.375 (9.53) 0.312 (7.92) 0.296 (7.52) 0.033 (0.84) 0.029 (0.74) 10 0.150 (3.81) 0.130 (3.30) 0.010 (0.25) 0.008 (0.20) ISO method A 4 typ. 0.052 (1.32) 0.048 (1.22) i17802 9-2 0.098 (0.249) 0.040 (0.102) Lead coplanarity 0.004 (0.102) max. ('K') 0.105 (2.67) 0.095 (2.41) Document Number: 83666 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 SFH610A, SFH6106 www.vishay.com Vishay Semiconductors Option 6 Option 7 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) typ. 0.028 (0.7) 0.400 (10.16) 0.430 (10.92) 0.300 (7.62) typ. 0.180 (4.6) 0.160 (4.1) 0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) Option 8 0.331 (8.4) min. 0.406 (10.3) max. 0.020 (0.50) 0.000 (0.00) 0.150 (3.81) 0.130 (3.30) 0.365 (9.27) min. 0.472 (12.00) max. 18487 Document Number: 83666 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.5, 28-Mar-18 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: SFH6106-1 SFH6106-2 SFH6106-3 SFH6106-4 SFH610A-1 SFH610A-2 SFH610A-3 SFH610A-4 SFH6106-3T SFH6106-2T SFH610A-1X001 SFH610A-1X016 SFH610A-2X001 SFH610A-2X006 SFH610A-3X001 SFH610A3X006 SFH610A-3X007T SFH610A-3X016 SFH610A-4X001 SFH610A-4X016 SFH6106-1T SFH6106-1X001 SFH6106-1X001T SFH6106-2X001 SFH6106-2X001T SFH6106-3X001 SFH6106-3X001T SFH6106-4T SFH61064X001 SFH6106-4X001T SFH6106-5T SFH610A-1X018T SFH610A-5 SFH610A-4X008T