MMSZ4678ET1 Series Zener Voltage Regulators 500 mW SOD-123 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD-123 package. These devices provide a convenient alternative to the leadless 34-package style. http://onsemi.com Features * * * * * * * 500 mW Rating on FR-4 or FR-5 Board Wide Zener Reverse Voltage Range - 1.8 V to 43 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class 3 (>16 kV) per Human Body Model Peak Power - 225 W (8 x 20 ms) Pb-Free Packages are Available 1 Cathode 2 Anode SOD-123 CASE 425 STYLE 1 2 Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 1 MARKING DIAGRAM 260C for 10 Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V-0 1 xxx M G G MAXIMUM RATINGS Rating Symbol Max Unit Peak Power Dissipation @ 20 ms (Note 1) @ TL 25C Ppk 225 W Total Power Dissipation on FR-5 Board, (Note 2) @ TL = 75C Derated above 75C PD 500 6.7 mW mW/C 340 C/W Thermal Resistance, (Note 3) Junction-to-Ambient RqJA Thermal Resistance, (Note 3) Junction-to-Lead RqJL 150 C/W TJ, Tstg -55 to +150 C Junction and Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Nonrepetitive current pulse per Figure 11. 2. FR-5 = 3.5 x 1.5 inches, using the minimum recommended footprint. 3. Thermal Resistance measurement obtained via infrared Scan Method. xxx = Device Code (Refer to page 2) M = Date Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Package Shipping MMSZ4xxxET1 SOD-123 3000/Tape & Reel MMSZ4xxxET1G SOD-123 (Pb-Free) 3000/Tape & Reel MMSZ4xxxET3 SOD-123 10000/Tape & Reel MMSZ4xxxET3G SOD-123 (Pb-Free) 10000/Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 2 of this data sheet. Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 2005 August, 2005 - Rev. 4 1 Publication Order Number: MMSZ4678ET1/D MMSZ4678ET1 Series ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.95 V Max. @ IF = 10 mA) Symbol I IF Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF VZ VR V IR VF IZT Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA) Zener Voltage (Note 1) VZ (V) Leakage Current @ IZT I R @ VR Device Marking Min Nom Max mA mA V MMSZ4684ET1 CG3 3.13 3.3 3.47 50 7.5 1.5 MMSZ4688ET1, G CG7 4.47 4.7 4.94 50 10 3 MMSZ4689ET1, G CG8 4.85 5.1 5.36 50 10 3 MMSZ4690ET1 CG9 5.32 5.6 5.88 50 10 4 MMSZ4691ET1 CH1 5.89 6.2 6.51 50 10 5 MMSZ4692ET1 CH2 6.46 6.8 7.14 50 10 5.1 MMSZ4693ET1 CH3 7.13 7.5 7.88 50 10 5.7 MMSZ4697ET1 CH7 9.50 10 10.50 50 1 7.6 MMSZ4699ET1 CH9 11.40 12 12.60 50 0.05 9.1 MMSZ4701ET1, G CJ2 13.3 14 14.7 50 0.05 10.6 MMSZ4702ET1, G CJ3 14.25 15 15.75 50 0.05 11.4 MMSZ4703ET1 CJ4 15.20 16 16.80 50 0.05 12.1 MMSZ4705ET1 CJ6 17.10 18 18.90 50 0.05 13.6 MMSZ4709ET1 CK1 22.80 24 25.20 50 0.01 18.2 MMSZ4711ET1 CK3 25.65 27 28.35 50 0.01 20.4 MMSZ4717ET1 CK9 40.85 43 45.15 50 0.01 32.6 Device* 1. Nominal Zener voltage is measured with the device junction in thermal equilibrium at TL = 30C 1C. *The "G'' suffix indicates Pb-Free package available. http://onsemi.com 2 MMSZ4678ET1 Series 8 100 7 VZ , TEMPERATURE COEFFICIENT (mV/C) VZ , TEMPERATURE COEFFICIENT (mV/C) TYPICAL CHARACTERISTICS TYPICAL TC VALUES 6 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 10 10 VZ, NOMINAL ZENER VOLTAGE (V) Figure 1. Temperature Coefficients (Temperature Range - 55C to +150C) Figure 2. Temperature Coefficients (Temperature Range - 55C to +150C) 1000 1.0 PD versus TL 0.8 0.6 PD versus TA 0.2 0 25 50 75 100 T, TEMPERATURE (C) RECTANGULAR WAVEFORM, TA = 25C 100 0.4 125 10 1 150 0.1 Figure 3. Steady State Power Derating 1 1000 1000 TJ = 25C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IF, FORWARD CURRENT (mA) IZ = 1 mA 100 75 V (MMSZ5267BT1) 91 V (MMSZ5270BT1) 100 5 mA 20 mA 10 10 150C 1 10 100 PW, PULSE WIDTH (ms) Figure 4. Maximum Nonrepetitive Surge Power 1000 Z ZT, DYNAMIC IMPEDANCE ( ) 100 VZ, NOMINAL ZENER VOLTAGE (V) Ppk , PEAK SURGE POWER (WATTS) PD, POWER DISSIPATION (WATTS) VZ @ IZT 1 12 1.2 0 TYPICAL TC VALUES 1 10 VZ, NOMINAL ZENER VOLTAGE 100 1 0.4 Figure 5. Effect of Zener Voltage on Zener Impedance 0.5 75C 25C 0C 0.6 0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V) Figure 6. Typical Forward Voltage http://onsemi.com 3 1.1 1.2 MMSZ4678ET1 Series TYPICAL CHARACTERISTICS 1000 TA = 25C 0 V BIAS 1 V BIAS C, CAPACITANCE (pF) I R , LEAKAGE CURRENT (m A) 1000 100 BIAS AT 50% OF VZ NOM 1 10 1 +150C 0.1 0.01 10 1 100 10 VZ, NOMINAL ZENER VOLTAGE (V) 100 0.001 + 25C 0.0001 -55C 0.00001 0 10 Figure 7. Typical Capacitance 100 I Z, ZENER CURRENT (mA) TA = 25C 10 1 0.1 0 2 4 6 8 VZ, ZENER VOLTAGE (V) 10 TA = 25C 10 1 0.1 0.01 12 100 30 50 70 VZ, ZENER VOLTAGE (V) PEAK VALUE IRSM @ 8 ms tr 90 10 PULSE WIDTH (tP) IS DEFINED AS THAT POINT WHERE THE PEAK CURRENT DECAY = 8 ms 80 70 60 HALF VALUE IRSM/2 @ 20 ms 50 40 30 tP 20 10 0 0 90 Figure 10. Zener Voltage versus Zener Current (12 V to 91 V) Figure 9. Zener Voltage versus Zener Current (VZ Up to 12 V) % OF PEAK PULSE CURRENT I Z, ZENER CURRENT (mA) 80 Figure 8. Typical Leakage Current 100 0.01 20 30 40 50 60 70 VZ, NOMINAL ZENER VOLTAGE (V) 20 40 60 t, TIME (ms) Figure 11. 8 x 20 ms Pulse Waveform http://onsemi.com 4 80 90 MMSZ4678ET1 Series PACKAGE DIMENSIONS SOD-123 CASE 425-04 ISSUE E D AAAA AAAA AAAA NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. A A1 1 HE DIM A A1 b c D E HE L E MIN 0.037 0.000 0.020 --- 0.055 0.100 0.140 0.010 INCHES NOM 0.046 0.002 0.024 --- 0.063 0.106 0.145 --- MAX 0.053 0.004 0.028 0.006 0.071 0.112 0.152 --- STYLE 1: PIN 1. CATHODE 2. ANODE L 2 MILLIMETERS MIN NOM MAX 0.94 1.17 1.35 0.00 0.05 0.10 0.51 0.61 0.71 --- --- 0.15 1.40 1.60 1.80 2.54 2.69 2.84 3.56 3.68 3.86 --- --- 0.25 C b SOLDERING FOOTPRINT* EEE EEE EEE 0.91 0.036 2.36 0.093 4.19 0.165 EEE EEE EEE SCALE 10:1 1.22 0.048 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com http://onsemi.com 5 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MMSZ4678ET1/D