M85049/112S12KW05-7 - Glenair - Datasheet.Technology

www.glenair.com E-Mail: sales@glenair.com

GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912

B-118

Dimensions in inches (millimeters) and are subject to change without notice.

AS85049

AS85049/112

Straight RFI/EMI Shield-Sock Shrink Boot Adapter

with Optional Self-Locking Coupling Nut

CONNECTOR DESIGNATOR:

FMIL-DTL-38999 Series I and II

Product Series and

Specication Sheet

M85049/112 S 10 T W 03 -6 D

Shell Size

(Table I)

S = Detented, Self-Locking

– = Non-Self-Locking (Use Dash)

N = Non-Detented, Self-Locking

Shield Finish

(Table IV)

Finish

(Table III)

Entry Size

(Table II) Drain Hole

(Omit for None)

Braid Length

1 Inch Increments,

6” Min., 18” Max

Coupling Nut

See Note 9

±.50 (12.7)

Length

See Note 5

Single Layer Shield

See Note 8

Knurl Style Mfr

Option - Typ

Marking Location

Optional

A Thread

.140 (3.56)

.130 (3.30)

(Ref)

.075 (1.9)

O-Ring

Adapter Body

1.19 (30.2) Max

www.glenair.com E-Mail: sales@glenair.com

GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912

B-119

Dimensions in inches (millimeters) and are subject to change without notice.

AS85049

AS85049/112

Straight RFI/EMI Shield-Sock Shrink Boot Adapter

with Optional Self-Locking Coupling Nut

APPLICATION NOTES

1. Metric equivalents are given for general information only and

are based on 1.000 inch (25.40 mm).

2. Dimensions are in inches and apply after plating. Accessory

conguration is optional within the specied dimension

envelope.

3. Adapter length is measured from the bottom of the accessory

teeth to the adapter that is covered by the braid, The adapter

surface under the braid shall be ribbed knurled or have a

surface roughness of .125 R minimum in accordance with ANSI

B46.1.

4. Pig tail terminated braid material shall be in accordance with

TableIV. Braid length is dened by Note 1 as shown in the part

or indentifying number (PIN).

5. Termination band conguration is not controlled. Band with

buckle may exceed the “Z” dimension (See Table II) provided

the band does not interfere with boot attachment, band material

shall be specied as in Table V.

6. Shrink boot (when required) shall be as specied in AS5258.

7. Termination of the accessory shield with harness shield

may be performed with a AS85049/93 shield support ring or

similar split ring accessory types.

8. Three (3) holes equally spaced shall be provided and

accommodate .020 (.51) maximum safety wire for the non-

self-locking coupling conguration.

9. Drain holes will be provided with a.125 (3.2 mm) diameter,

4 places equally spaces (optional, see part number

development). O-Ring not required when drain hole option is

specied.

10. Material/Finish:

Adapter, coupling nut - Al alloy/See Table III

Band - See Table V, manufacturer’s option

Braid - Copper/See Table IV

TABLE I: Shell Size, Entry Size, Thread and Dimensions

Accessory

Shell Size

Code

Series I

Shell Size

(Ref)

Series II

Shell Size

(Ref)

Thread Class 2B

B Max

Diameter

Allowable

Cable

Entry Size

08 9 8 7/16-28 UNEF .858 (21.79) 01

10 11 10 9/16-24 UNEF .984 (24.99) 01-03

12 13 12 11/16-24 UNEF 1.157 (29.39) 01-05

14 15 14 13/16-20 UNEF 1.279 (32.49) 03-07

16 17 16 15/16-20 UNEF 1.406 (35.71) 05-09

18 19 18 1 1/16-18 UNEF 1.516 (38.51) 06-10

20 21 20 1 3/16-18 UNEF 1.642 (41.71) 08-12

22 23 22 1 5/16-18 UNEF 1.768 (44.91) 09-13

24 25 24 1 7/16-18 UNEF 1.889 (47.98) 10-14

TABLE II: Entry Size

and Dimensions

Entry

Size W

± .020 (.51)

+.008 (.20)

-.000 (.00)

Max

01 .250 (6.4) .044 (1.12) .560 (14.2)

02 .312 (7.9) .044 (1.12) .630 (16.0)

03 .375 (9.5) .044 (1.12) .690 (17.5)

04 .438 (11.1) .044 (1.12) .750 (19.1)

05 .500 (12.7) .044 (1.12) .820 (20.8)

06 .562 (14.3) .044 (1.12) .890 (22.6)

07 .625 (15.9) .044 (1.12) .950 (24.1)

08 .688 (17.5) .044 (1.12) 1.020 (25.9)

09 .750 (19.1) .069 (1.75) 1.120 (28.4)

10 .812 (20.6) .069 (1.75) 1.200 (30.5)

11 .875 (22.2) .069 (1.75) 1.270 (32.3)

12 .938 (23.8) .069 (1.75) 1.260 (32.0)

13 1.000 (25.4) .069 (1.75) 1.370 (34.8)

14 1.125 (28.6) .069 (1.75) 1.470 (37.3)

Table V: (Manufacturer’s Option)

Material Finish

Copper Tin Plate

Stainless Steel Passivated

Table IV: Symbol and Finish

Symbol Finish

KNickel Plate

TTin Plate

Table III: Symbol and Finish

Symbol Finish

NElectroless Nickel

WCadmium/Olive Drab over Electroless

Nickel (1000 Hour Salt Spray)

XNickel Flurocarbon Polymer

ZZinc Nickel

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Glenair:

M85049/112-08KN01-6 M85049/112-08KW01-6 M85049/112-08TN01-6 M85049/112-08TW01-6 M85049/112-

10KN01-6 M85049/112-10KN02-6 M85049/112-10KN03-6 M85049/112-10KW01-6 M85049/112-10KW02-6

M85049/112-10KW03-6 M85049/112-10TN01-6 M85049/112-10TN02-6 M85049/112-10TN03-6 M85049/112-

10TW01-6 M85049/112-10TW02-6 M85049/112-10TW03-6 M85049/112-12KN01-6 M85049/112-12KN02-6

M85049/112-12KN03-6 M85049/112-12KN04-6 M85049/112-12KN05-6 M85049/112-12KW01-6 M85049/112-

12KW02-6 M85049/112-12KW03-6 M85049/112-12KW04-6 M85049/112-12KW05-6 M85049/112-12TN01-6

M85049/112-12TN02-6 M85049/112-12TN03-6 M85049/112-12TN04-6 M85049/112-12TN05-6 M85049/112-

12TW01-6 M85049/112-12TW02-6 M85049/112-12TW03-6 M85049/112-12TW04-6 M85049/112-12TW05-6

M85049/112-14KN03-6 M85049/112-14KN04-6 M85049/112-14KN05-6 M85049/112-14KN06-6 M85049/112-

14KN07-6 M85049/112-14KW03-6 M85049/112-14KW04-6 M85049/112-14KW05-6 M85049/112-14KW06-6

M85049/112-14KW07-6 M85049/112-14TN03-6 M85049/112-14TN04-6 M85049/112-14TN05-6 M85049/112-

14TN06-6 M85049/112-14TN07-6 M85049/112-14TW03-6 M85049/112-14TW04-6 M85049/112-14TW05-6

M85049/112-14TW06-6 M85049/112-14TW07-6 M85049/112-16KN05-6 M85049/112-16KN06-6 M85049/112-

16KN07-6 M85049/112-16KN08-6 M85049/112-16KN09-6 M85049/112-16KW05-6 M85049/112-16KW06-6

M85049/112-16KW07-6 M85049/112-16KW08-6 M85049/112-16KW09-6 M85049/112-16TN05-6 M85049/112-

16TN06-6 M85049/112-16TN07-6 M85049/112-16TN08-6 M85049/112-16TN09-6 M85049/112-16TW05-6

M85049/112-16TW06-6 M85049/112-16TW07-6 M85049/112-16TW08-6 M85049/112-16TW09-6 M85049/112-

18KN06-6 M85049/112-18KN07-6 M85049/112-18KN08-6 M85049/112-18KN09-6 M85049/112-18KN10-6

M85049/112-18KW06-6 M85049/112-18KW07-6 M85049/112-18KW08-6 M85049/112-18KW09-6 M85049/112-

18KW10-6 M85049/112-18TN06-6 M85049/112-18TN07-6 M85049/112-18TN08-6 M85049/112-18TN09-6

M85049/112-18TN10-6 M85049/112-18TW06-6 M85049/112-18TW07-6 M85049/112-18TW08-6 M85049/112-

18TW09-6 M85049/112-18TW10-6 M85049/112-20KN08-6 M85049/112-20KN09-6 M85049/112-20KN10-6

M85049/112-20KN11-6