DFM (Military M83401) Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15) FEATURES * 11, 12, 15 Schematics; hot-solder dipped * MIL-PRF-83401 qualified * Thick film resisitive elements * TCR available in "K" ( 100 ppm/C) or "M" ( 300 ppm/C) characteristic * 100 % screen tested per Group A, Subgroup 1 of MIL-PRF-83401 * 0.065" [1.65 mm] height for high density packaging STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL POWER RATING P70 C ELEMENT W P70 C PACKAGE W CIRCUIT SCHEMATIC LIMITING ELEMENT VOLTAGE MAX. V TEMPERATURE COEFFICIENT (1) (- 55 C to + 125 C) STANDARD (2) TOLERANCE % RESISTANCE RANGE 0.050 0.025 0.015 0.350 0.325 0.350 11 12 15 50 50 50 K, M K, M K, M 2 2 2 10R0 - 1M0 10R0 - 1M0 see table DFM Notes (1) K = 100 ppm/C; M = 300 ppm/C (2) 1 % and 5 % tolerance available * Consult factory for stocked values GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M8340103M6801GAD05 (preferred part numbering format) M 8 3 4 0 1 0 3 M 6 8 0 1 G RESISTANCE TOLERANCE VALUE M83401 03 3 digit significant F=1% K = 100 ppm M = 300 ppm figure, followed G=2% by a multiplier J=5% 10R0 = 10 3302 = 33 k 1004 = 1 M Historical Part Number example: M8340103M6801G A (will continue to be accepted) MIL STYLE SPEC SHEET CHARACTERISTIC A D 0 5 SCHEMATIC PACKAGING A = Isolated B = Bussed D05 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code M83401 03 M 6801 G A D05 MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE TOLERANCE SCHEMATIC PACKAGING New Global Part Numbering: M8340103KA001GJD05 (preferred part numbering format) M MIL STYLE M83401 8 3 4 0 1 0 SPEC SHEET CHARACTERISTIC 03 K = 100 ppm M = 300 ppm 3 K A RESISTANCE VALUE Per Std. MIL. Spec (see Impedence Codes table) 0 0 1 G J D 0 5 TOLERANCE SCHEMATIC PACKAGING F=1% G=2% J=5% J = Dual Terminator D05 = Tin/Lead, Tube DSL = Tin/Lead, Tube, Single Lot Date Code Historical Part Number example: M8340103KA001GJ (will continue to be accepted) M83401 03 K A001 G J D05 MIL STYLE SPEC SHEET CHARACTERISTIC RESISTANCE VALUE TOLERANCE SCHEMATIC PACKAGING www.vishay.com 330 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31517 Revision: 08-Jul-08 DFM (Military M83401) Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15) Vishay Dale DIMENSIONS in inches [millimeters] Pin #1 0.050 [1.27] Typ. 0.365 [9.27] Min. 0.385 [9.78] Max. 0.019 0.006 [0.483 0.15] 0.250 [6.35] Min. 0.075 [1.91] Max. 12 Schematic DFM1411 Package 0.350 0.200 15 Schematic Power Rating (W) Power Rating (W) Power Rating (W) 0.400 0.400 DFM1412 Package 0.325 DFM1415 Package 0.350 Single Resistor 0.050 0.025 Derating 0.400 0.200 0.200 Single Resistor - 55 + 25 + 70 + 125 + 150 0.005 + 0.004 - 0.002 [0.127 + 0.102 - 0.051] 0.825 [20.96] Max. 0.305 [7.75] Max. 11 Schematic 0.250 [6.35] Min. Single Resistor 0.015 - 55 + 25 + 70 + 125 + 150 - 55 Ambient Temperature C Ambient Temperature C + 25 + 70 + 125 + 150 Ambient Temperature C MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-PRF-83401 Solderability Per MIL-PRF-83401 Per MIL-STD-1276 DFM1411, DFM1412 and DFM1415 = Type G (hot solder dipped) Hot solder dipped leads supplied as standard finish. Terminals Body Epoxy filled ceramic sandwich IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () A001 82 130 A010 330 470 A002 120 200 A011 330 680 A003 130 210 A012 1.5K 3.3K A004 160 260 A013 3K 6.2K A005 180 240 A014 180 270 A006 180 390 A015 270 270 A007 220 270 A016 560 560 A008 220 330 A017 560 1.2K A009 330 390 A018 620 2.7K Document Number: 31517 Revision: 08-Jul-08 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 331 DFM (Military M83401) Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15) Vishay Dale CIRCUIT APPLICATIONS 11 Schematic DFM1411 (M8340103xxxxxxA) 7 isolated resistors The DFM1411 provides the user with 7 nominally equal resistors with each resistor isolated from all others. Commonly used in the following applications: DFM1411 Pin #1 * "Wired OR" Pull-up * Line Termination * LED Current Limiting * Power Driven Pull-up * ECL Output Pull-down * Power Gate Pull-up * TTL Input Pull-down * Long-line Impedance balancing 12 Schematic DFM1412 (M8340103xxxxxxB) 13 resistors with one pin common The DFM1412 provides the user with a choice of 13 nominally equal resistors, each connected * * * * * * * to a common pin. Commonly used in the following applications: DFM1412 Pin #1 * MOS/ROM Pull-up/ * "Wired OR" Pull-up * Pull-down * Power Driven Pull-up * Digital Pulse Squaring * TTL Input Pull-down * Open Collector Pull-up * TTL Unused Gate Pull-up * High Speed Parallel Pull-up 15 Schematic DFM1415 (M8340103xxxxxxJ) 14 R1 R1 R2 R1 1R2 R1 R2 R1 R2 R1 R2 R2 R1 R2 R1 R1 R2 R2 R1 R2 12 pairs of resistors R1 R2 R1 R2 The DFM1415 provides the user with a choice of 12 pairs of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. DFM1415 CAGE CODE: 91637 www.vishay.com 332 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31517 Revision: 08-Jul-08 DFM (Military M83401) Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ030, Schematics A (11), B (12), J (15) Vishay Dale PERFORMANCE MAX. R (Typical Test Lots) TEST CONDITIONS Power Conditioning 1.5 x rated power, applied 1.5 h "ON" and 0.5 h "OFF" for 100 h 4 h at + 25 C ambient temperature 0.50 % R Thermal Shock 5 cycles between - 65 C and + 125 C 0.50 % R Short Time Overload 2.5 x rated working voltage for 5 s 0.25 % R (Char. K) 0.50 % R (Char. M) Low Temperature Operation 45 min at full rated working voltage at - 65 C 0.25 % R (Char. K) 0.50 % R (Char. M) Moisture Resistance 240 h with humidity ranging from 80 % RH to 98 % RH 0.50 % R Resistance to Soldering Heat Leads immersed in + 260 C solder to within 1/16" of body for 10 s 0.25 % R Shock Total of 18 shocks at 100 g's 0.25 % R Vibration 12 h at maximum of 20 g's between 10 and 2000 Hz 0.25 % R Load Life 1000 h at + 70 C, rated power applied 1.5 h "ON", 0.5 h "OFF" for full 1000 h period Terminal Strength 1.5 pound pull for 30 s 0.25 % R Insulation Resistance 10 000 M (minimum) - Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 min) - Document Number: 31517 Revision: 08-Jul-08 For technical questions, contact: ff2aresistors@vishay.com 0.50 % R (Char. K) 2.0 % R (Char. M) www.vishay.com 333 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1