Features
RoHS compliant*
Surface Mount SMB package
Standoff Voltage: 5 to 495 volts
Power Dissipation: 600 watts
Applications
IEC 61000-4-2 ESD (Min. Level 4)
IEC 61000-4-4 EFT
IEC 61000-4-5 Surge
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
SMBJ Transient Voltage Suppressor Diode Series
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Parameter Symbol Value Unit
Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 600 Watts
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
IFSM 100 Amps
Steady State Power Dissipation @ TL = 75 °C PM(AV) 5.0 Watts
Maximum Instantaneous Forward Voltage @ IPP = 50 A
(For Unidirectional Units Only) VF(Note 5) Volts
Operating Temperature Range TJ-55 to +150 °C
Storage Temperature Range TSTG -55 to +175 °C
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.
5. VF = 3.5 V on SMBJ5.0A through SMBJ90A and VF= 5.0 V on SMBJ100A through SMBJ495A.
General Information
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB)
size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 495 V and Breakdown
Voltage up to 550 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices
from 0 V to Minimum Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the fl at confi guration
minimizes roll away.
How to Order
SMBJ 5.0 CA
Package
SMBJ = SMB/DO-214AA
Working Peak Reverse Voltage
5.0 = 5.0 VRWM (Volts)
Suffi x
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
*RoHS COMPLIANT
Asia-Pacifi c:
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116
Europe:
Tel: +41-41 768 5555
Fax: +41-41 768 5510
The Americas:
Tel: +1-951 781-5500
Fax: +1-951 781-5700
www.bourns.com
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
SMBJ Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Notes:
1. Suffi x ‘A’ denotes a 5 % tolerance unidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double.
2. Suffi x ‘CA’ denotes a 5 % tolerance bidirectional device. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine
Wave of 8.3 ms Pulse Width.
Unidirectional Device Bidirectional Device Breakdown Voltage
VBR (Volts)
Working
Peak
Reverse
Voltage
Maximum
Reverse
Leakage
@ VRWM
Maximum
Reverse
Voltage
@ IRSM
Maximum
Reverse
Surge
Current
Part
Number
Part
Marking
Part
Number
Part
Marking Min. Max. @ IT (mA) VRWM
(Volts) IR (μA) VRSM (Volts) IRSM (Amps)
SMBJ5.0A KE SMBJ5.0CA AE 6.40 7.00 10 5.0 800 9.2 65.2
SMBJ6.0A KG SMBJ6.0CA AG 6.67 7.37 10 6.0 800 10.3 58.3
SMBJ6.5A KK SMBJ6.5CA AK 7.22 7.98 10 6.5 500 11.2 53.6
SMBJ7.0A KM SMBJ7.0CA AM 7.78 8.60 10 7.0 200 12.0 50.0
SMBJ7.5A KP SMBJ7.5CA AP 8.33 9.21 1.0 7.5 100 12.9 46.5
SMBJ8.0A KR SMBJ8.0CA AR 8.89 9.83 1.0 8.0 50 13.6 44.1
SMBJ8.5A KT SMBJ8.5CA AT 9.44 10.4 1.0 8.5 20 14.4 41.7
SMBJ9.0A KV SMBJ9.0CA AV 10.0 11.1 1.0 9.0 10 15.4 39.0
SMBJ10A KX SMBJ10CA AX 11.1 12.3 1.0 10 5.0 17.0 35.3
SMBJ11A KZ SMBJ11CA AZ 12.2 13.5 1.0 11 5.0 18.2 33.0
SMBJ12A LE SMBJ12CA BE 13.3 14.7 1.0 12 5.0 19.9 30.2
SMBJ13A LG SMBJ13CA BG 14.4 15.9 1.0 13 5.0 21.5 27.9
SMBJ14A LK SMBJ14CA BK 15.6 17.2 1.0 14 5.0 23.2 25.8
SMBJ15A LM SMBJ15CA BM 16.7 18.5 1.0 15 5.0 24.4 24.0
SMBJ16A LP SMBJ16CA BP 17.8 19.7 1.0 16 5.0 26.0 23.1
SMBJ17A LR SMBJ17CA BR 18.9 20.9 1.0 17 5.0 27.6 21.7
SMBJ18A LT SMBJ18CA BT 20.0 22.1 1.0 18 5.0 29.2 20.5
SMBJ20A LV SMBJ20CA BV 22.2 24.5 1.0 20 5.0 32.4 18.5
SMBJ22A LX SMBJ22CA BX 24.4 26.9 1.0 22 5.0 35.5 16.9
SMBJ24A LZ SMBJ24CA BZ 26.7 29.5 1.0 24 5.0 38.9 15.4
SMBJ26A ME SMBJ26CA CE 28.9 31.9 1.0 26 5.0 42.1 14.2
SMBJ28A MG SMBJ28CA CG 31.1 34.4 1.0 28 5.0 45.4 13.2
SMBJ30A MK SMBJ30CA CK 33.3 36.8 1.0 30 5.0 48.4 12.4
SMBJ33A MM SMBJ33CA CM 36.7 40.6 1.0 33 5.0 53.3 11.3
SMBJ36A MP SMBJ36CA CP 40 44.2 1.0 36 5.0 58.1 10.3
SMBJ40A MR SMBJ40CA CR 44.4 49.1 1.0 40 5.0 64.5 9.3
SMBJ43A MT SMBJ43CA CT 47.8 52.8 1.0 43 5.0 69.4 8.6
SMBJ45A MV SMBJ45CA CV 50 55.3 1.0 45 5.0 72.7 8.3
SMBJ48A MX SMBJ48CA CX 53.3 58.9 1.0 48 5.0 77.4 7.7
SMBJ51A MZ SMBJ51CA CZ 56.7 62.7 1.0 51 5.0 82.4 7.3
SMBJ54A NE SMBJ54CA DE 60 66.3 1.0 54 5.0 87.1 6.9
SMBJ58A NG SMBJ58CA DG 64.4 71.2 1.0 58 5.0 93.6 6.4
SMBJ60A NK SMBJ60CA DK 66.7 73.7 1.0 60 5.0 96.8 6.2
SMBJ64A NM SMBJ64CA DM 71.1 78.6 1.0 64 5.0 103 5.8
SMBJ70A NP SMBJ70CA DP 77.8 86.0 1.0 70 5.0 113 5.3
SMBJ75A NR SMBJ75CA DR 83.3 92.1 1.0 75 5.0 121 4.9
SMBJ78A NT SMBJ78CA DT 86.7 95.8 1.0 78 5.0 126 4.7
SMBJ85A NV SMBJ85CA DV 94.4 104 1.0 85 5.0 137 4.4
SMBJ90A NX SMBJ90CA DX 100 111 1.0 90 5.0 146 4.1
SMBJ100A NZ SMBJ100CA DZ 111 123 1.0 100 5.0 162 3.7
SMBJ110A PE SMBJ110CA EE 122 135 1.0 110 5.0 177 3.4
SMBJ120A PG SMBJ120CA EG 133 147 1.0 120 5.0 193 3.1
SMBJ130A PK SMBJ130CA EK 144 159 1.0 130 5.0 209 2.9
SMBJ150A PM SMBJ150CA EM 167 185 1.0 150 5.0 243 2.5
SMBJ160A PP SMBJ160CA EP 178 197 1.0 160 5.0 259 2.3
SMBJ170A PR SMBJ170CA ER 189 209 1.0 170 5.0 275 2.2
SMBJ408A 408A SMBJ408CA 408C 456 504 1.0 408 1.0 658 0.9
SMBJ495A 495A SMBJ495CA 495C 522 578 1.0 495 1.0 760 0.8
Product Dimensions
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
SMBJ Transient Voltage Suppressor Diode Series
Recommended Footprint
Physical Specifi cations
Case ...........................................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
Weight ..................................................0.003 ounces / 0.093 grams
DIMENSIONS: MM
(INCHES)
B
G
F D
C
H
E
AA
C
B
Dimension SMB (DO-214AA)
A4.06 - 4.57
(0.160 - 0.180)
B3.30 - 3.94
(0.130 - 0.155)
C1.96 - 2.21
(0.077 - 0.087)
D0.15 - 0.31
(0.006 - 0.112)
E 5.21 - 5.59
(0.205 - 0.220)
F 0.05 - 0.20
(0.002 - 0.008)
G 2.01 - 2.62
(0.080 - 0.103)
H 0.76 - 1.52
(0.030 - 0.060)
DIMENSIONS: MM
(INCHES)
Dimension SMB (DO-214AA)
A (Max.) 2.69
(0.106)
B (Min.) 2.10
(0.083)
C (Min.) 1.27
(0.050)
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
SMBJ Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve Maximum Non-Repetitive Surge Current
Pulse Waveform Typical Junction Capacitance
Pulse Rating Curve Steady State Power Derating Curve
100
75
50
25
0
050
25 75 100 150125 175 200
Ambient Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
Peak Forward Surge Current (Amps)
120
80
100
60
40
20
0
12 5 10 20 50 100
Number of Cycles at 60 Hz
Pulse Width 8.3 ms
Single Half Sine-Wave
(JEDEC Method)
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
Capacitance (pF)
10000
100
10
110 100 1000
Standoff Voltage (Volts)
1000
Bidirectional
TA = 25 °C
Unidirectional
100
10
1.0
0.1
0.1 µs 1.0 µs 10 µs 10 ms
TP, Pulse Width
PP, Peak Power (KW)
100 µs 1.0 ms
TA = 25 °C
Non-repetitive
Pulse Waveform
Shown in Pulse Waveform Graph
5.0 mm Lead Areas
5.0
3.0
4.0
2.0
1.0
0.0
050
25 75 100 150125 175 200
TL, Lead Temperature (°C)
RM(AV) Steady State Power Dissipation (W)
60 Hz Resistive or
Inductive Load
CDDFN5-0504N - TVS/Steering Diode Array
Packaging Information
.......
.......
....... ..............
....... ..............
PA
F
ET
120 °
D2
DD
1
W1
C
Index Hole
Pin 1
Location
P
0
P
1
W
B
10 pitches (min.)
Direction of Feed
10 pitches (min.)
End
Trailer Device Leader
Start
d
The product will be dispensed in tape and reel format (see diagram below).
Devices are packed in accordance with EIA standard
RS-481-A and specifi cations shown here.
DIMENSIONS: MM
(INCHES)
Item Symbol SMB (DO-214AA)
Carrier Width A 4.94 ± 0.10
(0.194 - 0.004)
Carrier Length B 5.57 ± 0.10
(0.210 ± 0.004)
Carrier Depth C 2.36 ± 0.10
(0.093 ± 0.004)
Sprocket Hole d 1.55 ± 0.05
(0.061 ± 0.002)
Reel Outside Diameter D 330
(12.992)
Reel Inner Diameter D1 50.0
(1.969) MIN.
Feed Hole Diameter D2 13.0 ± 0.20
(0.512 ± 0.008)
Sprocket Hole Position E 1.75 ± 0.10
(0.069 ± 0.004)
Punch Hole Position F 5.50 ± 0.05
(0.217 ± 0.002)
Punch Hole Pitch P 4.00 ± 0.10
(0.157 ± 0.004)
Sprocket Hole Pitch P0 4.00 ± 0.10
(0.157 ± 0.004)
Embossment Center P1 2.00 ± 0.05
(0.079 ± 0.002)
Overall Tape Thickness T 0.30 ± 0.10
(0.012 ± 0.004)
Tape Width W 12.00 ± 0.20
(0.472 ± 0.008)
Reel Width W118.4
(0.724) MAX.
Quantity per Reel -- 3,000
REV. 08/12
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
SMBJ Transient Voltage Suppressor Diode Series