Power Packages TO-220AC 2 LEAD JEDEC TO-220AC PLASTIC PACKAGE (FOR RECTIFIERS ONLY) INCHES A OP E A1 Q H1 TERM. 3 D E1 45o D1 L1 b1 L b c 60o 1 e1 2 J1 MILLIMETERS SYMBOL MIN MAX MIN MAX NOTES A 0.170 0.180 4.32 4.57 - A1 0.048 0.052 1.22 1.32 - b 0.030 0.034 0.77 0.86 3, 4 b1 0.045 0.055 1.15 1.39 2, 3 c 0.014 0.019 0.36 0.48 2, 3, 4 D 0.590 0.610 14.99 15.49 - D1 - 0.160 E 0.395 0.410 E1 - 0.030 e1 0.200 BSC 10.04 - 4.06 - 10.41 - 0.76 5.08 BSC 5 H1 0.235 0.255 5.97 6.47 - J1 0.100 0.110 2.54 2.79 6 L 0.530 0.550 13.47 13.97 - L1 0.130 0.150 3.31 3.81 2 OP 0.149 0.153 3.79 3.88 - Q 0.102 0.112 2.60 2.84 - NOTES: 1. These dimensions are within allowable dimensions of Rev. J of JEDEC TO-220AC outline dated 3-24-87. 2. Lead dimension and finish uncontrolled in L1. 3. Lead dimension (without solder). 4. Add typically 0.002 inches (0.05mm) for solder coating. 5. Position of lead to be measured 0.250 inches (6.35mm) from bottom of dimension D. 6. Position of lead to be measured 0.100 inches (2.54mm) from bottom of dimension D. 7. Controlling dimension: Inch. 8. Revision 2 dated 12-93. 18