Tantalum 14.7_66716 Tantalum 7/21/14 7:08 AM Page 112 TCM Series Tantalum Solid Electrolytic Chip Capacitors Conductive Polymer Multianode FEATURES * Conductive polymer multianode * Extremely Low ESR * Reduced ignition failure mode * 3x reflow 260C compatible * Volumetric efficiency * High frequency capacitance retention LEAD-FREE COMPATIBLE COMPONENT Elektra Award 2010 APPLICATIONS * Telecommunication routers * Basestations with high power DC/DCs CASE DIMENSIONS: millimeters (inches) MARKING E, V CASE Code AVX LOGO Polymer Polarity Band (Anode+) Capacitance Value in pF 156 = 15F V 156 J XXXXX Case Size See table above EIA Metric 7343-43 7361-38 Rated Voltage J = 6.3V L0.20 W+0.20 (0.008) (0.008) -0.10 (0.004) 7.30 (0.287) 4.30 (0.169) 7.30 (0.287) 6.10 (0.240) H+0.20 (0.008) -0.10 (0.004) 4.10 (0.162) 3.55 (0.140) W10.20 (0.008) 2.40 (0.094) 3.10 (0.120) A+0.30 (0.012) S Min. -0.20 (0.008) 1.30 (0.051) 4.40 (0.173) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. ID Code HOW TO ORDER TCM E Type E EIA Code 2917 2924 108 M 004 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M=20% Rated DC Voltage 004=4Vdc 006=6.3Vdc 010=10Vdc 035=35Vdc 100=100Vdc R Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel 0010 ESR in m TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: 112 JULY 2014 +85C: +105C: +85C: +105C: All technical data relate to an ambient temperature of +25C 10 F to 1000 F 20% 0.1CV 4 6.3 10 35 100 3.2 5 8 28 80 5.2 8 13 46 130 4 6 10 35 100 -55C to +105C 1% per 1000 hours at 85C, VR with 0.1/V series impedance, 60% confidence level Tantalum 14.7_66716 Tantalum 7/21/14 7:08 AM Page 113 TCM Series Tantalum Solid Electrolytic Chip Capacitors Conductive Polymer Multianode CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 10 106 22 226 33 336 47 476 68 686 100 107 150 157 220 227 330 337 470 477 680 687 1000 108 Rated Voltage DC (VR) to 85C 6.3V (J) 10V (A) 35V (V) 4V (G) 100V (A) V(50) E(25) E(10,15) E(12) E(10,12) Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Size Cap (F) Rated Voltage (V) Rated Temp. (C) Category Category Voltage Temp. (V) (C) TCME108M004#0010 TCME108M004#0012 E E 1000 1000 4 4 85 85 3.2 3.2 TCME687M006#0012 E 680 6.3 85 5 TCME337M010#0010 TCME337M010#0015 E E 330 330 10 10 85 85 8 8 TCME226M035#0025 E 22 35 85 28 TCMV106M100#0050 V 10 100 85 80 DCL (A) Max. 4 Volt @ 85C 105 400 105 400 6.3 Volt @ 85C 105 408 10 Volt @ 85C 105 330 105 330 35 Volt @ 85C 105 77 100 Volt @ 85C 105 100 DF % Max. ESR Max. (m) @ 100kHz MSL 100kHz RMS Current (mA) 8 8 10 12 8 25C 85C 105C Product Category 3 3 6400 5800 4500 4100 2900 2600 105C 105C 12 3 5800 4100 2600 105C 8 8 10 15 3 3 6400 5200 4500 3600 2900 2300 105C 105C 8 25 3 4000 2800 1800 105C 8 50 3 2900 2000 1300 105C Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 204. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. JULY 2014 113 Tantalum 14.7_66716 Tantalum 7/21/14 7:08 AM Page 114 TCM Series Tantalum Solid Electrolytic Chip Capacitors Conductive Polymer Multianode PRODUCT CATEGORY 105C TEST Endurance Storage Life Humidity 105C series (Temperature range -55C to +105C) Characteristics Visual examination no visible damage Determine after application of rated voltage for 2000 +48/-0 hours at 852C and then leaving 1-2 hours at DCL 1.25 x initial limit room temperature. Also determine after application of C/C within +20/-30% of initial value 105C temperature, category voltage for 2000 +48/-0 DF 1.5 x initial limit hours and then leaving 1-2 hours at room temperature. Power supply impedance to be 0.1/V. ESR 2 x initial limit Visual examination no visible damage DCL (VR 75V) 1.25 x initial limit DCL (VR > 75V) 2 x initial limit 105C, 0V, 2000h C/C within 20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage Determine after storage without applied voltage DCL 3 x initial limit at 652C and 952% relative humidity for 500 C/C within +30/-20% of initial value hours and then recovery 1-2 hours at room temperature. DF 1.5 x initial limit ESR 2 x initial limit Condition Step 1 2 3 4 5 6 Temperature Stability Surge Voltage TemperatureC +202 -55+0/-3 +202 +85+3/-0 +105+3/-0 +202 Duration(min) 15 15 15 15 15 15 Test temperature: 105C+3/0C Test voltage: Category voltage at 105C Surge voltage: 1.3 x category voltage at 105C Series protection resistance 1000100 Discharge resistance: 1000 Number of cycles: 1000x Cycle duration: 6 min; 30 sec charge, 5 min 30 sec discharge *Initial Limit 114 JULY 2014 DCL C/C DF +20C -55C IL* n/a n/a +0/-20% IL* 1.5 x IL* +20C +85C +105C +20C IL* 10 x IL* 12.5 x IL* IL* 10% +20/-0% +30/-0% 10% IL* 1.5 x IL* 2 x IL* IL* Visual examination no visible damage DCL initial limit C/C within +20/-30% of initial value DF 1.25 x initial limit Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AVX: TCME337M010R0010 TCME108M004R0010 TCME108M004R0012 TCME226M035R0025 TCME337M010R0015 TCME687M006R0012