SENSITRON SEMICONDUCTOR UF4001-G - UF4007-G 1.0A ULTRAFAST RECOVERY RECTIFIER Green Products Date Sheet 4806, Rev. - Features l l l l l Diffused Junction Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability Green Products in Compliance with the RoHS Directive A B A Mechanical Data l l l l l l C Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 0.34 grams (approx.) Mounting Position: Any Marking: Type Number D Dim A B C D Maximum Ratings and Electrical Characteristics Min DO-41 Max 25.4 -- 4.06 5.21 0.71 0.864 2.00 2.72 In mm Min Max 1.000 -- 0.159 0.205 0.028 0.034 0.079 0.107 In inch @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TA = 55C UF UF UF UF 4001-G 4002-G 4003-G 4004-G UF UF UF 4005-G 4006-G 4007-G Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Max. Forward Voltage VFM @IF = 1.0A Peak Reverse Current @TA = 25C At Rated DC Blocking Voltage @TA = 100C 1.0 1.3 1.7 5.0 100 IRM V A Reverse Recovery Time (Note 2) trr 50 75 nS Typical Junction Capacitance (Note 3) Cj 20 10 pF Typical Thermal Resistance, Junction to Ambient RJA 60 C/W Typical Thermal Resistance, Junction to Lead at L= 0.375" (9.53mm) RJL 15 C/W Tj -55 to +125 C TSTG -55 to +150 C Operating Temperature Range Storage Temperature Range *Glass passivated forms are available upon request Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case 2. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 1. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. * ! ! !!"#$* * % & '(&)*+,,---.& ./0*12&%# %3& ./0* 1-G7-G Green Products 1.00 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) Data Sheet 4806, Rev. Single phase half wave Resistive or Inductive load 0.75 0.50 0.25 0 0 25 50 75 100 125 150 10 UF4001 - G - UF4003-G UF4004-G 1.0 0.1 UF4005-G- UF4007-G 0.01 0 175 TA, AMBIENT TEMPERATURE (C) Fig. 1 Forward Current Derating Curve 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 Tj = 25C f = 1.0MHz Pulse width 8.3 ms single half-sine-wave (JEDEC method) Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) Tj = 25C Pulse width = 300s 20 10 UF4001-G - UF4004-G 10 UF4005-G - UF4007-G 1 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 50 NI (Non-inductive) 10 NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0 NI (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0M, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50. Oscilloscope (Note 1) -0.25A -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit * ! ! !!"#$* * % & '(&)*+,,---.& ./0*12&%# %3& ./0* SENSITRON SEMICONDUCTOR Data Sheet 4806, Rev. - UF4001-G-UF4007-G 1.0A ULTRA FAST RECOVERY RECTIFIER Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6 The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * 221 West Industry Court ! Deer Park, NY 11729-4681 ! (631) 586-7600 FAX (631) 242-9798 * * World Wide Web Site - http://www.sensitron.com * E-Mail Address - sales@sensitron.com *