BYQ28E, BYQ28EF, BYQ28EB UG10DCT, UGF10DCT, UGB10DCT Series Dual Ultrafast Soft Recovery Rectifier Reverse Voltage 100 to 200V Forward Current 10A Reverse Recovery Time 20ns t c u rod P New ITO-220AB (BYQ28EF, UGF10 Series) 0.188 (4.77) 0.172 (4.36) 0.405 (10.27) 0.383 (9.72) 0.110 (2.80) 0.100 (2.54) 0.185 (4.70) 0.415 (10.54) MAX. 0.175 (4.44) 0.154 (3.91) 0.370 (9.40) 0.360 (9.14) 0.055 (1.39) 0.045 (1.14) 0.148 (3.74) 0.676 (17.2) 0.646 (16.4) 0.600 (15.5) 0.580 (14.5) 0.113 (2.87) 0.103 (2.62) 0.350 (8.89) 0.330 (8.38) PIN 1 2 3 0.145 (3.68) 0.135 (3.43) 0.410 (10.41) 0.390 (9.91) 1 PIN 2 0.191 (4.85) 0.171 (4.35) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 0.635 (16.13) 0.625 (15.87) 3 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) PIN 1 PIN 2 PIN 3 CASE 0.105 (2.67) 0.095 (2.41) PIN 2 CASE 0.022 (0.55) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 0.105 (2.67) 0.037 (0.94) 0.027 (0.68) PIN 1 PIN 3 0.037 (0.94) 0.027 (0.69) 0.105 (2.67) 0.095 (2.41) 0.560 (14.22) 0.530 (13.46) 0.110 (2.80) 0.100 (2.54) 0.060 (1.52) 1.148 (29.16) 1.118 (28.40) 0.160 (4.06) 0.140 (3.56) 0.095 (2.41) 0.131 (3.39) DI 0.122 (3.08) 0.140 (3.56) DIA. 0.130 (3.30) TO-220AB (BYQ28E, UG10 Series) Dimensions in inches and (millimeters) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) TO-263AB (BYQ28EB, UGB10 Series) 0.411 (10.45) 0.190 (4.83) 0.380 (9.65) 0.160 (4.06) 0.055 (1.40) 0.045 (1.14) 0.245 (6.22) MIN K Mounting Pad Layout TO-263AB 0.055 (1.40) 0.360 (9.14) 0.047 (1.19) 0.320 (8.13) 0.33 (8.38) 0.624 (15.85) 1 K 2 0.591 (15.00) 0-0.01 (0-0.254) 0.08 (2.032) 0.24 (6.096) 0.04 (1.016) 0.42 (10.66) 0.63 (17.02) 0.12 (3.05) 0.110 (2.79) 0.090 (2.29) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.021 (0.53) PIN 1 0.014 (0.36) PIN 2 K - HEATSINK 0.205 (5.20) 0.140 (3.56) 0.110 (2.79) 0.195 (4.95) Features Mechanical Data * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * High reverse energy capability * Excellent high temperature switching * High temperature soldering guaranteed: 250C/10 seconds at terminals * Glass passivated chip junction * Soft recovery characteristics Case: JEDEC TO-220AB, ITO-220AB & TO-263AB molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 ounce, 2.24 grams 3/10/00 BYQ28E, BYQ28EF, BYQ28EB UG10DCT, UGF10DCT, UGB10DCT Series Ultrafast Soft Recovery Rectifier Maximum Ratings UG10BCT (TC = 25C unless otherwise noted) Parameter Symbol UG10CCT UG10DCT BYQ28E-100 BYQ28E-150 BYQ28E-200 Unit Maximum repetitive peak reverse voltage VRRM 100 150 200 V Working peak reverse voltage VRWM 100 150 200 V Maximum DC blocking voltage VDC 100 150 200 V Maximum average forward rectified current Total device at TC = 100C Per leg IF(AV) 10 5 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg IFSM 55 A Repetitive peak reverse current per leg at tp = 100s IRRM 0.2 A VC 8 KV TJ, TSTG -40 to +150 C IRSM 0.2 A VISOL 4500 (NOTE 1) 3500 (NOTE 2) 1500 (NOTE 3) V Symbol Value Unit VF 1.25 1.10 0.895 V IR 10 200 A Maximum reverse recovery time per leg at IF = 1.0A, di/dt = 100A/s, VR = 30V, Irr = 0.1 IRM trr 25 ns Maximum reverse recovery time per leg at IF = 0.5A, IR = 1.0A, Irr = 0.25A trr 20 ns Maximum stored charge per leg IF = 2A, di/dt = 20A/s, VR = 30V, Irr = 0.1 IRM Qrr 9 nC Electrostatic discharge capacitor voltage, Human body model: C = 250pF, R = 1.5k Operating junction and storage temperature range Non-repetitive peak reverse current per leg at tp= 100s RMS Isolation voltage (BYQ28EF, UGF types) from terminals to heatsink with t = 1 second, RH 30% Electrical Characteristics (T C = 25C unless otherwise noted) Parameter Maximum instantaneous forward voltage at IF = 10A, at IF = 5A, at IF = 5A, Maximum reverse current per leg at working peak reverse voltage (Note 4) per leg (Note 4) TJ = 25C TJ = 25C TJ = 150C TJ = 25C TJ = 100C Thermal Characteristics (T C UG10 UGF10 UGB10 Symbol BYQ28E BYQ28EF BYQ28EB Unit RJA RJC 50 4.5 55 6.7 50 4.5 C/W C/W = 25C unless otherwise noted) Parameter Typical thermal resistance -- junction to ambient -- junction to case Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset (2) Clip mounting (on case), where leads do overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is 4.9 mm (0.19") (4) Pulse test: 300s pulse width, 1% duty cycle BYQ28E, BYQ28EF, BYQ28EB UG10DCT, UGF10DCT, UGB10DCT Series Ratings and Characteristic Curves (T Ultrafast Soft Recovery Rectifier A = 25C unless otherwise noted) Maximum Non-Repetitive Peak Forward Surge Current Per Leg Forward Current Derating Curve 15 100 Peak Forward Surge Current (A) Average Forward Current (A) Resistive or Inductive Load 10 5 0 TC = 105C 8.3ms Single Half Sine-Wave (JEDEC Method) 10 1 50 0 150 100 1 Typical Reverse Characteristics Per Leg 100 IR - Instantaneous Reverse Current (mA) IF - Instantaneous Forward Current (A) Typical Instantaneous Forward Characteristics Per Leg Pulse Width = 300s 1% Duty Cycle 10 TJ = 125C TJ = 100C 1.0 TJ = 25C 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1000 TJ = 125C 100 100C 10 1.0 25C 0.1 20 1.4 Reverse Switching Characteristics Per Leg 60 80 100 Typical Junction Capacitance Per Leg 50 100 @2A, 20A/s 40 pF - Junction Capacitance Stored Charge/Reverse Recovery Time (nC/ns) 40 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (V) @5A, 50A/s 30 @1A, 100A/s 20 @5A, 50A/s @1A, 100A/s 10 25 50 75 TJ = 125C f = 1.0 MHZ Vsig = 50mVp-p 10 trr Qrr @2A, 20A/s 0 100 10 Number of Cycles at 60 HZ Case Temperature (C) 100 Junction Temperature (C) 125 1 0.1 1 10 Reverse Voltage (V) 100