Semiconductor Components Industries, LLC, 2012
January, 2012 − Rev. 8
1Publication Order Number:
MBRD320/D
MBRD320G, SBRD8320G,
MBRD330G, SBRD8330G,
MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G,
MBRD360G, SBRD8360G
MBRD320, MBRD340 and MBRD360 are Preferred Devices
SWITCHMODE
Power Rectifiers
DPAK Surface Mount Package
These state−of−the−art devices are designed for use as output
rectifiers, free wheeling, protection and steering diodes in switching
power supplies, inverters and other inductive switching circuits.
Features
Extremely Fast Switching
Extremely Low Forward Drop
Platinum Barrier with Avalanche Guardrings
AEC−Q101 Qualified and PPAP Capable
SBRD8 Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements
All Packages are Pb−Free*
Mechanical Characteristics:
Case: Epoxy, Molded
Weight: 0.4 Gram (Approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes;
260C Max. for 10 Seconds
ESD Ratings:
Machine Model = C
Human Body Model = 3B
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
SCHOTTKY BARRIER
RECTIFIERS
3.0 AMPERES, 20 − 60 VOLTS
Preferred devices are recommended choices for future use
and best overall value.
1
3
4
http://onsemi.com
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
ORDERING INFORMATION
Y = Year
WW = Work Week
B3x0 = Device Code
x = 2, 3, 4, 5, or 6
G = Pb−Free Package
DPAK
CASE 369C
MARKING DIAGRAM
YWW
B
3x0G
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol
MBRD/SBRD8
Unit
320 330 340 350 360
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
20 30 40 50 60 V
Average Rectified Forward Current (TC = +125C, Rated VR) IF(AV) 3 A
Peak Repetitive Forward Current, TC = +125C
(Rated VR, Square Wave, 20 kHz)
IFRM 6 A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFSM 75 A
Peak Repetitive Reverse Surge Current (2 ms, 1 kHz) IRRM 1 A
Operating Junction Temperature Range (Note 1) TJ−65 to +175 C
Storage Temperature Range Tstg −65 to +175 C
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/ms
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Characteristic Symbol Value Unit
Maximum Thermal Resistance, Junction−to−Case RqJC 6C/W
Maximum Thermal Resistance, Junction−to−Ambient (Note 2) RqJA 80 C/W
2. Rating applies when surface mounted on the minimum pad size recommended.
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Value Unit
Maximum Instantaneous Forward Voltage (Note 3)
iF = 3 Amps, TC = +25C
iF = 3 Amps, TC = +125C
iF = 6 Amps, TC = +25C
iF = 6 Amps, TC = +125C
VF0.6
0.45
0.7
0.625
V
Maximum Instantaneous Reverse Current (Note 3)
(Rated dc Voltage, TC = +25C)
(Rated dc Voltage, TC = +125C)
iR0.2
20
mA
3. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%.
ORDERING INFORMATION
Device Package Shipping†
MBRD320G DPAK
(Pb−Free)
75 Units / Rail
SBRD8320G DPAK
(Pb−Free)
75 Units / Rail
MBRD320RLG DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD320T4G DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8320T4G DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD330G DPAK
(Pb−Free)
75 Units / Rail
SBRD8330G DPAK
(Pb−Free)
75 Units / Rail
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
http://onsemi.com
3
ORDERING INFORMATION
Device Shipping†
Package
MBRD330RLG DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD330T4G DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8330T4G DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD340G DPAK
(Pb−Free)
75 Units / Rail
SBRD8340G DPAK
(Pb−Free)
75 Units / Rail
MBRD340RLG DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD340T4G DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8340T4G DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD350G DPAK
(Pb−Free)
75 Units / Rail
SBRD8350G DPAK
(Pb−Free)
75 Units / Rail
MBRD350RLG DPAK
(Pb−Free)
1,800 Tape & Reel
SBRD8350RLG DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD350T4G DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8350T4G DPAK
(Pb−Free)
2,500 Tape & Reel
MBRD360G DPAK
(Pb−Free)
75 Units / Rail
SBRD8360G DPAK
(Pb−Free)
75 Units / Rail
MBRD360RLG DPAK
(Pb−Free)
1,800 Tape & Reel
SBRD8360RLG DPAK
(Pb−Free)
1,800 Tape & Reel
MBRD360T4G DPAK
(Pb−Free)
2,500 Tape & Reel
SBRD8360T4G DPAK
(Pb−Free)
2,500 Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
http://onsemi.com
4
TYPICAL CHARACTERISTICS
Figure 1. Typical Forward Voltage
Figure 2. Typical Reverse Current
Figure 3. Average Power Dissipation
0.7 1.00.1
vF, INSTANTANEOUS VOLTAGE (VOLTS)
100
10
VR, REVERSE VOLTAGE (VOLTS)
40 700
20
0.1
0.04
0.001
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
1.00
10
8.0
6.0
4.0
2.0
0
2.0
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
I
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
1.0
0.40.2 0.3 0.5 0.6 0.8 0.9
50 6010 20 30
10
40
100
3.0 4.0 5.0 6.0 7.0 10
0.1 1.1 8.0 9.0
9.0
7.0
5.0
3.0
1.0
, REVERSE CURRENT (mA)
R
0.2
0.4
1.0
0.02
0.01
0.004
0.002
TJ = 25C
150C
125C
75C
TJ = 150C
IPK/IAV = 20
SINE
WAVE
SQUARE
WAVE
dc
10
5
TJ = 150C
*The curves shown are typical for the highest voltage device in the
voltage grouping. Typical reverse current for lower voltage selections
can be estimated from these curves if VR is sufficient below rated VR.
125C
4.0
2.0 100C
75C
25C
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
http://onsemi.com
5
TYPICAL CHARACTERISTICS
Figure 4. Current Derating, Case
Figure 5. Current Derating, Ambient
Figure 6. Typical Capacitance
14080
TC, CASE TEMPERATURE (C)
8.0
7.0
5.0
6.0
4.0
TA, AMBIENT TEMPERATURE (C)
100 1600
2.0
1.0
0.5
0
600
VR, REVERSE VOLTAGE (VOLTS)
100
70
50
30
20
10
70
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
C, CAPACITANCE (pF)
3.0
2.0
1.0
11090 100 120 130 150 160
120 14020 40 60 80
1.5
2.5
3.0
10 20 30 40 50
0
3.5
4.0
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
200
300
500
700
1 K
TJ = 25C
RATED VOLTAGE APPLIED
TJ = 150C
RqJC = 6C/W
dc
SINE
WAVE
OR
SQUARE
WAVE
TJ = 150C
TJ = 150C
TJ = 125C
RqJA = 80C/W
SURFACE MOUNTED ON MIN.
PAD SIZE RECOMMENDED
SQUARE WAVE
OR
SINE WAVE
VR = 25 V
dc
MBRD320G, SBRD8320G, MBRD330G, SBRD8330G, MBRD340G, SBRD8340G,
MBRD350G, SBRD8350G, MBRD360G, SBRD8360G
http://onsemi.com
6
PACKAGE DIMENSIONS
DPAK (SINGLE GAUGE)
CASE 369C−01
ISSUE D
b
D
E
b3
L3
L4
b2
eM
0.005 (0.13) C
c2
A
c
C
Z
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
D0.235 0.245 5.97 6.22
E0.250 0.265 6.35 6.73
A0.086 0.094 2.18 2.38
b0.025 0.035 0.63 0.89
c2 0.018 0.024 0.46 0.61
b2 0.030 0.045 0.76 1.14
c0.018 0.024 0.46 0.61
e0.090 BSC 2.29 BSC
b3 0.180 0.215 4.57 5.46
L4 −−− 0.040 −−− 1.01
L0.055 0.070 1.40 1.78
L3 0.035 0.050 0.89 1.27
Z0.155 −−− 3.93 −−−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI-
MENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
12 3
4
5.80
0.228
2.58
0.102
1.60
0.063
6.20
0.244
3.00
0.118
6.17
0.243
ǒmm
inchesǓ
SCALE 3:1
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
H0.370 0.410 9.40 10.41
A1 0.000 0.005 0.00 0.13
L1 0.108 REF 2.74 REF
L2 0.020 BSC 0.51 BSC
A1
H
DETAIL A
SEATING
PLANE
A
B
C
L1
L
H
L2 GAUGE
PLANE
DETAIL A
ROTATED 90 CW5
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
MBRD320/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
