Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER General Description Features The AP4313 is a highly integrated solution for a constant voltage/constant current mode SMPS application. * * * * * * The AP4313 contains one 1.21V voltage reference with 1% accuracy, one current sensing circuit and two operational amplifiers. Combining the voltage reference with one operational amplifier makes AP4313 an ideal voltage controller for use in adapters and battery chargers. The other low voltage reference combined with the other operational amplifier makes it an ideal current limiter for output low side current sensing. AP4313 Constant Voltage and Constant Current Control Precision Internal Voltage Reference Few External Components Easy Compensation Low Supply Current: 0.5mA Operating Temperature Range: -40 to 105oC Applications * * The AP4313 is available in SOT-23-6 package. Adapters Battery Chargers SOT-23-6 Figure 1. Package Type of AP4313 May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 1 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Pin Configuration K Package (SOT-23-6) Pin 1 Dot by Marking VCTRL 1 6 VCC GND 2 5 VSENSE VOUT 3 4 ICTRL Figure 2. Pin Configuration of AP4313 (Top View) Pin Description Pin Number Pin Name Function 1 VCTRL 2 GND Ground 3 VOUT Output pin. Sinking current only 4 ICTRL Input pin of the current control loop 5 VSENSE Input pin of the current control loop 6 VCC Input pin of the voltage control loop Power supply May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 2 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Functional Block Diagram VCC 6 1.210V 3 VOUT 1 VCTRL 2 GND 200mV 5 4 ICTRL VSENSE Figure 3. Functional Block Diagram of AP4313 Ordering Information AP4313 - Circuit Type G1: Green Package K: SOT-23-6 TR: Tape and Reel Package Temperature Range SOT-23-6 -40 to 105oC Part Number AP4313KTR-G1 Marking ID G6G Packing Type Tape & Reel BCD Semiconductor's products, as designated with "G1" suffix in the part number, are RoHS compliant and Green. May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 3 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Absolute Maximum Ratings (Note 1) Parameter Symbol Value Unit Power Supply Voltage VCC 20 V Input Voltage VIN -0.3 to VCC V Junction Temperature TJ 150 Storage Temperature TSTG -65 to 150 oC TLEAD 260 oC JC 92 Lead Temperature (Soldering, 5sec) Package Thermal Resistance (Junction to Case) o o C C/W Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Range Symbol Min Max Unit VCC 2.5 18 V TA -40 105 oC May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 4 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Electrical Characteristics (VCC=5V, TA=25oC, unless otherwise specified.) Parameter Symbol Conditions Min Typ Max Unit 0.6 1.2 mA TOTAL CURRENT CONSUMPTION Total Supply Current Not Including the Output Sinking Current ICC VOLTAGE CONTROL LOOP Transconduction Gain (VCTRL). Sink Current Only Gmv 1 3.5 Voltage Control Loop Reference VREF 1.198 1.21 Input Bias Current (VCTRL) IIBV mA/mV 1.222 V 50 nA 1.5 7 mA/mV 196 200 CURRENT CONTROL LOOP Transconduction Gain (ICTRL). Current Control Loop Reference Current Out of Pin ICTRL at -200mV Gmi VSENSE IOUT=2.5mA 204 mV IIBI 25 A Low Output Voltage at 10mA Sinking Current VOL 200 mV Output Short Circuit Current. Output to VCC. Sink Current Only IOS 27 OUTPUT STAGE May 2010 Rev. 2. 0 50 mA BCD Semiconductor Manufacturing Limited 5 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Typical Performance Characteristics 202 1.225 201 1.220 VCC=12V VCC=5V VCC=2.5V 200 VSENSE (mV) VREF (V) 1.215 1.210 1.205 199 198 197 1.200 196 1.195 -40 -20 0 20 40 60 80 100 195 -40 120 -20 0 20 40 60 80 Ambient Temperature ( C) Figure 4. VREF vs. Ambient Temperature 120 Figure 5. VSENSE vs. Ambient Temperature 40 80 VCC=12V VCC=5V VCC=2.5V 60 VCC=12V VCC=5V VCC=2.5V 35 IIBI (A) 40 IIBV (nA) 100 o Ambient Temperature ( C) o 20 30 25 0 20 -20 -40 -40 -20 0 20 40 60 80 100 15 -40 120 o -20 0 20 40 60 80 100 120 o Ambient Temperature ( C) Ambient Temperature ( C) Figure 6. VCTRL Pin Input Bias Current vs. Ambient Temperature Figure 7. ICTRL Pin Input Bias Current vs. Ambient Temperature May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 6 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Typical Performance Characteristics (Continued) 1.4 60 VCC=12V VCC=5V VCC=2.5V 1.2 50 1.0 ICC (mA) IOS (mA) 40 30 VCC=12V VCC=5V VCC=2.5V 20 10 0 -40 -20 0 20 40 60 80 100 0.8 0.6 0.4 0.2 0.0 -40 120 -20 0 20 40 60 80 100 120 o o Ambient Temperature ( C) Ambient Temperature ( C) Figure 9. Supply Current vs. Ambient Temperature Figure 8. Output Short Circuit Current vs. Ambient Temperature May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 7 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Typical Application VOUT+ To primary AP4313 VCC R4 1.210V R3 VOUT + R2 IL C1 + VCTRL Load C3 GND R5 VSENSE ICTRL R1 R6 500 VOUT- Rss VOUT = VREF x R1 + R 2 R1 (V) VSENSE RSS (A) CurrentLimit = Figure 10. Typical Application 1 of AP4313 May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 8 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Typical Application (Continued) VOUT+ To primary AP4313 VCC R4 1.210V R3 VOUT + R2 IL C1 + VCTRL Load C3 GND ICTRL R5 VSENSE R1 R6 500 VOUTRss VOUT = [VREF + ( I L x RSS )] x R1 + R 2 - ( I L x RSS ) R1 CurrentLimit = VSENSE RSS (V) (A) Figure 11. Typical Application 2 of AP4313 May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 9 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Typical Application (Continued) VOUT+ To primary AP4313 VCC R4 1.210V VOUT + R3 R2 IL C1 + VCTRL Load C3 GND ICTRL R5 VSENSE R1 R6 500 VOUTRss VOUT = VREF x R1 + R 2 - ( I L x RSS ) R1 CurrentLimit = (V) VSENSE x VREF (VSENSE + VREF )x RSS (A) Figure 12. Typical Application 3 of AP4313 May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 10 Data Sheet CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER AP4313 Mechanical Dimensions SOT-23-6 Unit: mm(inch) 0 2.820(0.111) 8 3.020(0.119) 0.300(0.012) 0.400(0.016) 5 0.300(0.012) 0.600(0.024) 4 1.500(0.059) 1.700(0.067) 2.650(0.104) 2.950(0.116) 6 0.200(0.008) Pin 1 Dot by Marking 1 2 3 0.700(0.028)REF 0.950(0.037)TYP 0.000(0.000) 0.150(0.006) 1.800(0.071) 2.000(0.079) 0.100(0.004) 0.200(0.008) 0.900(0.035) 1.450(0.057) MAX 1.300(0.051) May 2010 Rev. 2. 0 BCD Semiconductor Manufacturing Limited 11 BCD Semiconductor Manufacturing Limited http://www.bcdsemi.com IMPORTANT NOTICE IMPORTANT NOTICE BCD Semiconductor BCD Semiconductor Manufacturing Manufacturing Limited Limited reserves reserves the the right right to to make make changes changes without without further further notice notice to to any any products products or or specifispecifications herein. cations herein. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not assume assume any any responsibility responsibility for for use use of of any any its its products products for for any any particular purpose, particular purpose, nor nor does does BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited assume assume any any liability liability arising arising out out of of the the application application or or use use of any of any its its products products or or circuits. circuits. BCD BCD Semiconductor Semiconductor Manufacturing Manufacturing Limited Limited does does not not convey convey any any license license under under its its patent patent rights rights or or other rights other rights nor nor the the rights rights of of others. others. MAIN SITE SITE MAIN - Headquarters BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab No. 1600, Zi Xing Road, Shanghai ZiZhu Science-basedLimited Industrial Park, 200241, China Shanghai SIM-BCD Semiconductor Manufacturing Tel: Fax: +86-21-24162277 800,+86-21-24162266, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 REGIONAL SALES OFFICE Shenzhen OfficeSALES OFFICE REGIONAL - Wafer FabSemiconductor Manufacturing Limited BCD Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. - IC Design Group 800 Yi Shan Road, Shanghai 200233, China Corporation Advanced Analog Circuits (Shanghai) Tel: +86-21-6485 1491,YiFax: 0008200233, China 8F, Zone B, 900, Shan+86-21-5450 Road, Shanghai Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 Taiwan Office Shanghai Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan Semiconductor Shenzhen SIM-BCD Office Office (Taiwan) Company Limited Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan Shenzhen, 4F, 298-1, Guang Road,(Taiwan) Nei-Hu District, Taipei, Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd.District, Shenzhen Office BCDRui Semiconductor Company Limited China Taiwan Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Tel: +86-755-8826 Tel: +886-2-2656 2808 Room E, 5F, Noble 7951 Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan Fax: +86-755-88267951 7865 Fax: +886-2-2656 28062808 Tel: +86-755-8826 Tel: +886-2-2656 Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 USA Office BCD Office Semiconductor Corp. USA 30920Semiconductor Huntwood Ave.Corporation Hayward, BCD CA 94544, USA Ave. Hayward, 30920 Huntwood Tel :94544, +1-510-324-2988 CA U.S.A Fax:: +1-510-324-2988 +1-510-324-2788 Tel Fax: +1-510-324-2788