TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Low Supply Current . . . 470 nA/PerChannel
D
Input Common-Mode Range Exceeds the
Rails . . . –0.1 V to VCC + 5 V
D
Supply Voltage Range . . . 2.5 V to 16 V
D
Reverse Battery Protection Up to 18 V
D
Open Drain CMOS Output Stage
D
Specified Temperature Range
– 0°C to 70°C – Commercial Grade
– –40°C to 125°C – Industrial Grade
D
Ultrasmall Packaging
– 5-Pin SOT-23 (TLV3401)
– 8-Pin MSOP (TLV3402)
D
Universal Op-Amp EVM (Reference
SLOU060 for more information)
description
The TLV340x is Texas Instruments’ first family of
nanopower comparators with only 470 nA per
channel supply current, which make this device
ideal for battery power and wireless handset
applications.
The TLV340x has a minimum operating supply
voltage of 2.7 V over the extended industrial
temperature range (TA = –40°C to 125°C), while
having an input common-mode range of –0.1 to
VCC + 5 V. The low supply current makes it an ideal
choice for battery powered portable applications
where quiescent current is the primary concern.
Reverse battery protection guards the amplifier
from an over-current condition due to improper
battery installation. For harsh environments, the
inputs can be taken 5 V above the positive supply
rail without damage to the device.
All members are available in PDIP and SOIC with the singles in the small SOT -23 package, duals in the MSOP,
and quads in the TSSOP package.
A SELECTION OF OUTPUT COMPARATORS†
DEVICE VCC
(V) VIO
(µV) ICC/Ch
(µA) IIB
(pA)tPLH
(µs)tPHL
(µs)tf
(µs)tr
(µs)RAIL-TO-
RAIL OUTPUT
STAGE
TLV340x 2.5 – 16 250 0.47 80 55 30 5 – I OD
TLV370x 2.5 – 16 250 0.47 80 25 30 5 3.5 I PP
TLC3702/4 3 – 16 1200 9 5 1.1 0.65 0.5 0.125 – PP
TLC393/339 3 – 16 1400 11 5 1.1 0.55 0.22 – – OD
TLC372/4 3 – 16 1000 75 5 0.65 0.65 – – – OD
†All specifications are typical values measured at 5 V.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
500
00
VCC – Supply Voltage – V
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
CC
I Supply Current – –nA
100
200
300
400
600
700
2 4 6 8 10 12 14
VID = –1 V
TA = 125°C
TA = 25°C
TA = 70°C
TA = 0°C
TA = –40°C
16
high side voltage sense circuit
TLV340X µP
D1
R4
1 MΩ
R3
100 kΩ
R1
1 MΩ
R2
1 MΩ
+
0
0
VCC
Vref
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLV3401 AVAILABLE OPTIONS
V max
PACKAGED DEVICES
TA
V
IOmax
AT 25°CSMALL OUTLINE
(D)†SOT-23
(DBV)‡SYMBOL PLASTIC DIP
(P)
0°C to 70°C
3600 µV
TLV3401CD TLV3401CDBV VBDC —
-40°C to 125°C
3600
µ
V
TLV3401ID TLV3401IDBV VBDI TLV3401IP
†This package is available taped and reeled. To order this packaging option, add an R suf fix to the part number (e.g., TLV3401CDR).
‡This package is only available taped and reeled. For standard quantities (3000 pieces per reel), add an R suffix (i.e., TL V3401CDBVR. For small
quantities (250 pieces per mini-reel), add a T suffix to the part number (e.g., TLV3401CDBVT).
TLV3402 A VAILABLE OPTIONS
Vma
PACKAGED DEVICES
TA
V
IOmax
AT 25°CSMALL OUTLINE
(D)†MSOP
(DGK)†SYMBOL PLASTIC DIP
(P)
0°C to 70°C
3600 µV
TLV3402CD TLV3402CDGK xxTIAJJ —
–40°C to 125°C
3600
µ
V
TLV3402ID TLV3402IDGK xxTIAJK TLV3402IP
†This package is available taped and reeled. To order this packaging option, add an R suf fix to the part number (e.g., TLV3402CDR).
TLV3404 A VAILABLE OPTIONS
Vma
PACKAGED DEVICES
TA
V
IOmax
AT 25°CSMALL OUTLINE
(D)†PLASTIC DIP
(N) TSSOP
(PW)
0°C to 70°C
3600 µV
TLV3404CD —TLV3404CPW
–40°C to 125°C
3600
µ
V
TLV3404ID TLV3404IN TLV3404IPW
†This package is available taped and reeled. To order this packaging option, add an R suffix to the part
number (e.g., TLV3404CDR).
3
2
4
5
(TOP VIEW)
1
OUT
GND
IN+
VCC
IN–
TLV3401
DBV PACKAGE
1
2
3
4
8
7
6
5
NC
IN–
IN+
GND
NC
VCC
OUT
NC
TLV3401
D OR P PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
1OUT
1IN–
1IN+
GND
VCC
2OUT
2IN–
2IN+
TLV3402
D, DGK, OR P PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN–
1IN+
VCC
2IN+
2IN–
2OUT
4OUT
4IN–
4IN+
GND
3IN+
3IN–
3OUT
(TOP VIEW)
TLV3404
D, N, OR PW PACKAGE
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) 17 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, VID ±20 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Notes 1 and 2) 0 to VCC + 5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current range, II ±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current range, IO ±10 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: C suffix 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I suffix –40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum junction temperature, TJ 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to GND.
2. Input voltage range is limited to 20 V or VCC + 5 V, whichever is smaller.
DISSIPATION RATING TABLE
PACKAGE θJC
(°C/W) θJA
(°C/W) TA ≤ 25°C
POWER RATING TA = 125°C
POWER RATING
D (8) 38.3 176 710 mW 142 mW
D (14) 26.9 122.6 1022 mW 204.4 mW
DBV (5) 55 324.1 385 mW 77.1 mW
DGK (8) 54.2 259.9 481 mW 96.2 mW
N (14) 32 78 1600 mW 320.5 mW
P (8) 41 104 1200 mW 240.4 mW
PW (14) 29.3 173.6 720 mW 144 mW
recommended operating conditions
MIN MAX UNIT
Single su
pp
ly
C-suffix 2.5 16
Su
pp
ly voltage VCC
Single
supply
I-suffix 2.7 16
V
Supply
voltage
,
V
CC
S
p
lit su
pp
ly
C-suffix ±1.25 ±8
V
Split
supply
I-suffix ±1.35 ±8
Common-mode input voltage range, VICR –0.1 VCC+5 V
O
p
erating free air tem
p
erature TA
C-suffix 0 70
°C
Operating
free
-
air
temperature
,
T
AI-suffix –40 125
°C
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics at specified operating free-air temperature, VCC = 2.7 V, 5 V, 15 V (unless
otherwise noted)
dc performance
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
VIO
In
p
ut offset voltage
25°C 250 3600
µV
V
IO
Input
offset
voltage
VIC= VCC/2, RS = 50 Ω, RP = 1 MΩFull range 4400 µ
V
αVIO Offset voltage drift 25°C 3 µV/°C
VIC=0to27V
RS=50Ω
25°C 55 72
V
IC=
0
to
2
.
7
V
,
R
S =
50
Ω
Full range 50
CMRR
Common mode rejection ratio
VIC=0to5V
RS=50Ω
25°C 60 76
dB
CMRR
Common
-
mode
rejection
ratio
V
IC=
0
to
5
V
,
R
S =
50
Ω
Full range 55
dB
VIC=0to15V
RS=50Ω
25°C 65 88
V
IC=
0
to
15
V
,
R
S =
50
Ω
Full range 60
AVD Large-signal differential voltage
amplification RP = 1 MΩ25°C 1000 V/mV
†Full range is 0°C to 70°C for C suffix and –40°C to 125°C for I suffix. If not specified, full range is –40°C to 125°C.
input/output characteristics
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
IIO
In
p
ut offset current
25°C 20 100 p
A
I
IO
Input
offset
current
VIC =V
CC/2 RP=1MΩRS=50Ω
Full range 1000
pA
IIB
In
p
ut bias current
V
IC =
V
CC
/2
,
R
P =
1
MΩ
,
R
S =
50
Ω
25°C 80 250 p
A
I
IB
Input
bias
current
Full range 1500
pA
ri(d) Differential input resistance 25°C 300 MΩ
IOZ High-impedance output leakage
current VIC = VCC/2, VO = VCC, VID = 1 V 25°C 50 pA
VIC = VCC/2, IOL = 2 µA, VID = –1 V 25°C 8
VOL Low-level output voltage
VIC =V
CC/2 IOL =50µAV
ID =1V
25°C 80 200 mV
V
IC =
V
CC
/2
,
I
OL =
50
µ
A
,
V
ID = –
1
V
Full range 300
†Full range is 0°C to 70°C for C suffix and –40°C to 125°C for I suffix. If not specified, full range is –40°C to 125°C.
power supply
PARAMETER TEST CONDITIONS TA†MIN TYP MAX UNIT
Out
p
ut state low
25°C 470 550
ICC
Su
pp
ly current (
p
er channel)
RP=No
p
ullu
p
Output
state
low
Full range 750
nA
I
CC
Supply
current
(per
channel)
R
P =
No
pullup
Out
p
ut state high
25°C 560 640
nA
Output
state
high
Full range 950
VCC=27Vto5V
25°C 75 100
PSRR
Power su
pp
ly rejection ratio
VIC = VCC/2 V,
V
CC=
2
.
7
V
to
5
V
Full range 70
dB
PSRR
Power
supply
rejection
ratio
IC CC
No load
VCC=5Vto15V
25°C 85 105
dB
V
CC=
5
V
to
15
V
Full range 80
†Full range is 0°C to 70°C for C suffix and –40°C to 125°C for I suffix. If not specified, full range is –40°C to 125°C.
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics at recommended operating conditions, VCC = 2.7 V, 5 V, 15 V, TA = 25°C
(unless otherwise noted)
PARAMETER TEST CONDITIONS TAMIN TYP MAX UNIT
Ptidltilthihll
Overdrive = 2 mV 175
t
(
PLH
)
Propagation delay time, low-to-high-level
out
p
ut
f=10kHz
Overdrive = 10 mV 25°C80
()
out ut
f
=
10
kHz
,
V
STEP
= 1 V, Overdrive = 50 mV 55
µs
Ptidltihihtlll
STEP ,
RP = 1 MΩ,
C10F
Overdrive = 2 mV 300 µ
s
t
(
PHL
)
Propagation delay time, high-to-low-level
out
p
ut
CL = 10 pF Overdrive = 10 mV 25°C60
()
out ut
Overdrive = 50 mV 30
tfFall time RP = 1 MΩ, CL = 10 pF 25°C 5 µs
NOTE: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
Input bias/of fset current vs Free-air temperature 1
Open collector leakage current vs Free-air temperature 2
VOL Low-level output voltage vs Low-level output current 3, 4, 5
IDD Supply current vs Supply voltage 6
IDD Supply current vs Free-air temperature 7
Low-to-high level output response for various input overdrives 8, 9, 10
High-to-low level output response for various input overdrives 11, 12, 13
Output fall time vs Supply voltage 14
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
–200
0
200
400
600
800
1000
1200
–40 –10 20 35 65 125
INPUT BIAS/OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
TA – Free-Air Temperature – °C
IIB – Input Bias/Offset Current – pA
IIB
IIO
/IIO
VCC = 15 V
Figure 1
–25 5 50 80 95 110
Figure 2
–200
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
–40 –25 –10 5 20 35 50 65 80 95 110 125
OPEN COLLECTOR LEAKAGE CURRENT
vs
FREE-AIR TEMPERATURE
TA – Free-Air Temperature – °C
IOZ – Open Collector Leakage Current – pA
VCC = 15 V
VCC = 2.7 V, 5 V
VID = 1 V
Figure 3
0.0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
IOL – Low-Level Output Current – mA
OL
V– Low-Level Output Voltage – V
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
VCC = 2.7 V
VID = –1 V
TA = 125°C
TA = 25°C
TA = 70°C
TA = 0°C
TA = –40°C
Figure 4
0
2
2.5
3
3.5
4.5
5
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
IOL – Low-Level Output Current – mA
OL
V– Low-Level Output Voltage – V
0.5
1
1.5
0 0.4 0.8 1.2 1.6 2.0 2.4 2.8
VCC = 5 V
VID = –1 V
TA = 125°C
TA = 25°C
TA = 70°C
TA = 0°C
TA = –40°C
4
Figure 5
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
IOL – Low-Level Output Current – mA
OL
V– Low-Level Output Voltage – V
0
1.5
3
4.5
6
7.5
9
10.5
12
13.5
15
0123456789
VCC = 15 V
VID = –1 V
TA = 125°C
TA = 25°C
TA = 70°C
TA = 0°C
TA = –40°C
Figure 6
500
00
VCC – Supply Voltage – V
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
CC
I Supply Current – –nA
100
200
300
400
600
700
2468101214
VID = –1 V
TA = 125°C
TA = 25°C
TA = 70°C
TA = 0°C
TA = –40°C
16
Figure 7
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
TA – Free-Air Temperature – °C
ICC – Supply Current – nA
VCC = 2.7 V, 5 V, 15 V
VID = –1 V
0
100
200
300
400
500
600
700
–40–25–10 5 20 35 50 65 80 95 110 125
Figure 8
0
0.5
1
1.5
2
2.5
0 50 100 150 200 250 300
0
0.05
0.1
t – Time – µs
LOW-TO-HIGH LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
VCC = 2.7 V
CL = 10 pF
RP = 1 MΩ (Pullup to VCC)
TA = 25°C
10 mV
– Output Voltage – VVO
50 mV
– DifferentialVID
2 mV
3
Input Voltage – V
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 9
t – Time – µs
LOW-TO-HIGH LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
– Output Voltage – VVO
1
2
0
0.05
0.1
5
10 mV
50 mV
– DifferentialVID
2 mV
0
0 50 100 150 200 250 300
3
4
VCC = 5 V
CL = 10 pF
RP = 1 MΩ (Pullup to VCC)
TA = 25°C
Input Voltage – V
Figure 10
0
0.05
0.1
t – Time – µs
LOW-TO-HIGH LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
VCC = 15 V
CL = 10 pF
10 mV
– Output Voltage – VVO
– DifferentialVID
0
2
4
6
8
10
12
14
16
0 50 100 150 200 250 300
50 mV
2 mV
VCC = 15 V
CL = 10 pF
RP = 1 MΩ (Pullup to VCC)
TA = 25°C
Input Voltage – V
Figure 11
t – Time – µs
HIGH-TO-LOW LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
– Output Voltage – VVO
1
1.5
2
2.5
0
0.05
0.1
3
10 mV
– DifferentialVID
2 mV
0.5
0
0 50 100 150 200 250 300 350 400
VCC = 2.7 V
CL = 10 pF
RP = 1 MΩ (Pullup to VCC)
TA = 25°C
50 mV
Input Voltage – V
Figure 12
0
0.05
0.1
t – Time – µs
HIGH-TO-LOW LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
10 mV
– Output Voltage – VVO
50 mV
– DifferentialVID
2 mV
0
1
2
3
4
5
6
0 50 100 150 200 250 300 350 400
–1VCC = 5 V
CL = 10 pF
RP = 1 MΩ (Pullup to VCC)
TA = 25°C
Input Voltage – V
Figure 13
t – Time – µs
HIGH-TO-LOW LEVEL OUTPUT
RESPONSE FOR VARIOUS
INPUT OVERDRIVES
– Output Voltage – VVO
0
0.05
0.1
10 mV
50 mV
– DifferentialVID
2 mV
0
2
4
6
8
10
12
14
16
0 50 100 150 200 250 300 350 400
VCC = 15 V
CL = 10 pF
RP = 1 MΩ (Pullup to VCC)
TA = 25°C
Input Voltage – V
Figure 14
4
0246 10 1315
VCC – Supply Voltage – V
OUTPUT FALL TIME
vs
SUPPLY VOLTAGE
f
t Output Fall Time – –s
VID= 1 V to –1 V
Rp = 1 MΩ (Pullup to VCC)
Input Fall Time = 500 ns
TA = 25°C
CL = 50 pF
CL = 10 pF
µ
35 9 1214
1
2
3
5
6
7
8
78 11
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
8POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
D (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
4040047/D 10/96
0.228 (5,80)
0.244 (6,20)
0.069 (1,75) MAX 0.010 (0,25)
0.004 (0,10)
1
14
0.014 (0,35)
0.020 (0,51)
A
0.157 (4,00)
0.150 (3,81)
7
8
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.010 (0,25)
PINS **
0.008 (0,20) NOM
A MIN
A MAX
DIM
Gage Plane
0.189
(4,80)
(5,00)
0.197
8
(8,55)
(8,75)
0.337
14
0.344
(9,80)
16
0.394
(10,00)
0.386
0.004 (0,10)
M
0.010 (0,25)
0.050 (1,27)
0°–8°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
D. Falls within JEDEC MS-012
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
DBV (R-PDSO-G5) PLASTIC SMALL-OUTLINE
0,10
M
0,20
0,95
0°–8°
0,25
0,35
0,55
Gage Plane
0,15 NOM
4073253-4/E 05/99
2,60
3,00
0,50
0,30
1,50
1,70
45
31
2,80
3,00
0,95
1,45 0,05 MIN
Seating Plane
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC MO-178
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
DGK (R-PDSO-G8) PLASTIC SMALL-OUTLINE PACKAGE
0,69
0,41
0,25
0,15 NOM
Gage Plane
4073329/B 04/98
4,98
0,25
5
3,05 4,78
2,95
8
4
3,05
2,95
1
0,38
1,07 MAX
Seating Plane
0,65 M
0,25
0°–6°
0,10
0,15
0,05
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion.
D. Falls within JEDEC MO-187
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
N (R-PDIP-T**) PLASTIC DUAL-IN-LINE PACKAGE
0.325 (8,26)
0.300 (7,62)
0.010 (0,25) NOM
Gauge Plane
0.015 (0,38)
0.430 (10,92) MAX
20
0.975
(24,77)
0.940
(23,88)
18
0.920
0.850
14
0.775
0.745
(19,69)
(18,92)
16
0.775
(19,69)
(18,92)
0.745
A MIN
DIM
A MAX
PINS **
(23,37)
(21,59)
Seating Plane
14/18 PIN ONLY
4040049/D 02/00
9
8
0.070 (1,78) MAX
A
0.035 (0,89) MAX 0.020 (0,51) MIN
16
1
0.015 (0,38)
0.021 (0,53)
0.200 (5,08) MAX
0.125 (3,18) MIN
0.240 (6,10)
0.260 (6,60)
M
0.010 (0,25)
0.100 (2,54)
16 PINS SHOWN
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001 (20-pin package is shorter than MS-001).
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
P (R-PDIP-T8) PLASTIC DUAL-IN-LINE
8
4
0.015 (0,38)
Gage Plane
0.325 (8,26)
0.300 (7,62)
0.010 (0,25) NOM
MAX
0.430 (10,92)
4040082/D 05/98
0.200 (5,08) MAX
0.125 (3,18) MIN
5
0.355 (9,02)
0.020 (0,51) MIN
0.070 (1,78) MAX
0.240 (6,10)
0.260 (6,60)
0.400 (10,60)
1
0.015 (0,38)
0.021 (0,53)
Seating Plane
M
0.010 (0,25)
0.100 (2,54)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
TLV3401, TLV3402, TLV3404
FAMILY OF NANOPOWER OPEN DRAIN OUTPUT COMPARATORS
SLCS135A – AUGUST 2000 – REVISED NOVEMBER 2000
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65 M
0,10
0,10
0,25
0,50
0,75
0,15 NOM
Gage Plane
28
9,80
9,60
24
7,90
7,70
2016
6,60
6,40
4040064/F 01/97
0,30
6,60
6,20
80,19
4,30
4,50
7
0,15
14
A
1
1,20 MAX
14
5,10
4,90
8
3,10
2,90
A MAX
A MIN
DIM PINS **
0,05
4,90
5,10
Seating Plane
0°–8°
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its products to the specifications applicable at the time of sale in accordance with
TI’s standard warranty . T esting and other quality control techniques are utilized to the extent TI deems necessary
to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except
those mandated by government requirements.
Customers are responsible for their applications using TI components.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
products or services might be or are used. TI’s publication of information regarding any third party’s products
or services does not constitute TI’s approval, license, warranty or endorsement thereof.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations and notices. Representation
or reproduction of this information with alteration voids all warranties provided for an associated TI product or
service, is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Resale of TI’s products or services with
statements different from or beyond the parameters
stated by TI for
that product or service voids all express and any implied warranties for the associated TI product or service,
is an unfair and deceptive business practice, and TI is not responsible nor liable for any such use.
Also see: Standard Terms and Conditions of Sale for Semiconductor Products. www.ti.com/sc/docs/stdterms.htm
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2001, Texas Instruments Incorporated
