DO NOT
SCALE FROM
THIS PRINT
-02 THRU -50
(PER ROW)
-01: .120 [3.05]
-02: .075 [1.91]
-04: .150 [3.81]
OPTIONS
-DH: DOUBLE HORIZONTAL
(USE **FTSHC-1XX-XX-XXX-DH UNLESS -A
OPTION IS SPECIFIED, THEN USE FTSH-XX-DH-XX
AND BUILD PER PRINT)
** = SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR
DETAILS
PLATING SPECIFICATION
FTSH-1XX-XX-XXX-DH-XX
TAIL OPTION
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
No OF POSITIONS
LEAD STYLE
-TR: TAPE AND REEL
-A: ALIGNMENT PIN
(SEE FIG 2, SHEET 2 & FIG 3, SHEET 3)
(MOLDED TO POSITION
OR STAKED)
(SAMTEC DISCRETION WHICH
-A PIN IS USED)
(STAKED 8 POSITION MIN. SEE FIG 3,
SHEET 3, USE FTSH-XX-DH)
(MOLDED 5 POSITION MIN. SEE FIG 2,
SHEET 2, USE FTSH-XX-DH-AXX)
-C: POLYIMIDE FILM
(SEE FIG 4, SHEET 3)
"A"
.21 5.3
.032 0.82
.099
REF
2.51
2
MAX SWAY
(EITHER DIRECTION)
CRITICAL AREA
(SEE NOTE 4)
C
T-1S15-03-XX
SEE NOTE 3
C
.006 [0.15]
.135
REF
3.43
(No OF POS x .0500[1.270])
No OF POS x .0500[1.270] - .0500[1.270]
.0500 1.27
01 03
04
SEE NOTE 4
FTSHC-50-D
.005[0.13]
.010[0.25]
02
.016
SQ REF (TYP)
0.41 2
MAX SWAY
(EITHER DIRECTION)
'B'
.000±.002 0.01±0.05
(SEE NOTE 6)
DETAIL 'B'
SCALE 20 : 1
(TAILS ONLY)
C
C
.006[0.15]
C
FIG 1
FTSHC-1XX-XX-XXX-DH SHOWN
(SEE FTSHC-1XX-XX-XXX-DX-XX PRINT FOR DETAILS
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
BY:
FTSH-1XX-XX-XXX-DH-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/04/1995
3
1
SHEET SCALE: 4:1
INSULATOR:
LCP, UL 94-V0 COLOR: BLACK
TERMINAL:
PHOSPHOR BRONZE, ALLOY No. 510, GRADE A, FED. SPEC.
QQ-B-750, SPRING TEMPER
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
PATENT NUMBERS
5713755 / 5961339
NOTES:
1. REPRESENTS A CRITICAL DIMENSION
2. MINIMUM PUSH OUT FORCE: .5 LB.
3. MAXIMUM BURR ALLOWED: .002[.05].
4. MAXIMUM CUT FLASH ALLOWED IN NON- CRITICAL AREA: .010[.25],
NO CUT FLASH ALLOWED IN CRITICAL AREAS AS SHOWN.
5. MAXIMUM HEIGHT VARIATION .005[.13] BETWEEN ROWS.
6. APPLIES TO FIRST AND LAST PIN OF EACH ROW.
REVISION BH
(SEE TABLE 1)
"A"
.102 2.59
.099
REF
2.51
IN-PROCESS 1
.035
REF
0.89
FIG 2
-A: ALIGNMENT PIN (MOLDED) OPTION
DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 1
(No OF POS - 2) x .050 [1.27] REF
.040
REF
1.02
FTSH-XX-DH-XX
(SEE TABLE 1)
"A"
.245 6.22
.099
REF
2.51
IN-PROCESS 3
(SEE TABLE 1)
"A"
.09 2.3
.022
REF
0.56
.099
REF
2.51
IN-PROCESS 2
'C'
.000
+
-
.003
.001 0.01
+
-
0.08
0.03
DETAIL 'C'
SCALE 20 : 1
(TAILS ONLY)
C
C
.006 [0.15]
SHEET OF
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
BY:
FTSH-1XX-XX-XXX-DH-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/04/1995
3
2
SHEET SCALE: 2:1
REVISION BH
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
PT-FTSH001-DH
PACKAGING VIEW
.140 3.56
FIG 4
-C: POLYIMIDE FILM
.197
±.010
5.00
±0.25
"R" (SEE NOTE)
"S" (SEE NOTE)
.049
±.010
1.24
±0.25
.035 0.89
REF
FIG 3
-A: ALIGNMENT PIN (STAKED) OPTION
DIFFERENT AS SHOWN, OTHERWISE
SAME AS FIG 2
SM-A9H
.040 1.02
(No OF POS - 2) x .050 [1.27] REF
C
C
NOTE: "R" = USED MEASURED DIMENSION (REF)
"S" = (("R" - .1969 [5.001]) / 2) ±.020 [.51]
PACKAGING NOTES:
1. PACKAGE POSITIONS 10 THROUGH 50 IN TUBES.
2. POSITIONS 02 THROUGH 09 ARE TO BE
LAYER PACKAGED. EXCEPT FOR -C OPTION,
TUBE POSITIONS 05 THROUGH 50.
3. ALL PART POSITIONS 05 THROUGH 50 USE
PT-FTSH001-DH.
4. USE TP-24 PLUG.
SHEET OF
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
BY:
FTSH-1XX-XX-XXX-DH-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/04/1995
3
3
SHEET SCALE: 2:1
REVISION BH
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
