Ultracompact, Precision
10.0 V/5.0 V/2.5 V/3.0 V Voltage References
Data Sheet
ADR01/ADR02/ADR03/ADR06
Rev. R
Information fur
nished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©20022012 Analog Devices, Inc. All rights reserved.
FEATURES
Ultracompact SC70 and TSOT packages
Low temperature coefficient
8-lead SOIC: 3 ppm/°C
5-lead SC70: 9 ppm/°C
5-lead TSOT: 9 ppm/°C
Initial accuracy ±0.1%
No external capacitor required
Low noise 10 µV p-p (0.1 Hz to 10.0 Hz)
Wide operating range
ADR01: 12.0 V to 36.0 V
ADR02: 7.0 V to 36.0 V
ADR03: 4.5 V to 36.0 V
ADR06: 5.0 V to 36.0 V
High output current 10 mA
Wide temperature range: 40°C to +125°C
ADR01/ADR02/ADR03 pin compatible to industry-
standard REF01/REF02/REF03
ADR01, ADR02, ADR03 and ADR06 SOIC qualified for
automotive applications
APPLICATIONS
Precision data acquisition systems
High resolution converters
Industrial process control systems
Precision instruments
Auto battery monitoring
PCMCIA cards
PIN CONFIGURATIONS
5
4
1
3
2
V
OUT
TRIM
V
IN
TEMP
GND
TOP VIEW
(Not t o Scal e)
ADR01/
ADR02/
ADR03/
ADR06
02747-001
Figure 1. 5-Lead, SC70/TSOT Surface-Mount Packages
TOP VIEW
(No t t o Scale)
8
6
1
NIC
3
2
ADR01/
ADR02/
ADR03/
ADR06
V
OUT
7
5
4
TRIM
NIC
NIC
V
IN
TEMP
GND
NOTES
1. NIC = NO INTE RNAL CONNECT.
02747-002
Figure 2. 8-Lead, SOIC Surface-Mount Package
GENERAL DESCRIPTION
The ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V,
5.0 V, 2.5 V, and 3.0 V band gap voltage references featuring high
accuracy, high stability, and low power consumption. The parts
are housed in tiny, 5-lead SC70 and TSOT packages, as well as
in 8-lead SOIC versions. The SOIC versions of the ADR01,
ADR02, and ADR03 are drop-in replacements1 to the industry-
standard REF01, REF02, and REF03. The small footprint and
wide operating range make the ADR0x references ideally suited
for general-purpose and space-constrained applications.
With an external buffer and a simple resistor network, the
TEMP terminal can be used for temperature sensing and
approximation. A TRIM terminal is provided on the devices for
fine adjustment of the output voltage.
The ADR01, ADR02, ADR03, and ADR06 are compact, low
drift voltage references that provide an extremely stable output
voltage from a wide supply voltage range. They are available in
5-lead SC70 and TSOT packages, and 8-lead SOIC packages
with A, B, and C grade selections. All parts are specified over
the extended industrial (40°C to +125°C) temperature range.
The ADR01, ADR02, ADR03, and ADR06 A grade in 8-lead
SOIC are qualified for automotive applications.
Table 1. Selection Guide
Part Number Output Voltage
ADR01 10.0 V
ADR02 5.0 V
ADR03 2.5 V
ADR06 3.0 V
1 ADR01, ADR02, and ADR03 are component-level compatible with REF01, REF02, and REF03, respectively. No guarantees for system-level compatibility are implied.
SOIC versions of ADR01/ADR02/ADR03 are pin-to-pin compatible with 8-lead SOIC versions of REF01/REF02/REF03, respectively, with the additional temperature
monitoring function.
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 2 of 20
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications ....................................................................................... 1
Pin Configurations ........................................................................... 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 4
ADR01 Electrical Characteristics ............................................... 4
ADR02 Electrical Characteristics ............................................... 5
ADR03 Electrical Characteristics ............................................... 6
ADR06 Electrical Characteristics ............................................... 7
Absolute Maximum Ratings ............................................................ 8
Thermal Resistance ...................................................................... 8
ESD Caution .................................................................................. 8
Terminology .......................................................................................9
Typical Performance Characteristics ........................................... 10
Applications Information .............................................................. 15
Overview ..................................................................................... 15
Applying the ADR01/ADR02/ADR03/ADR06 ...................... 15
Low Cost Current Source .......................................................... 16
Precision Current Source with Adjustable Output ................ 16
Programmable 4 mA to 20 mA Current Transmitter ............ 17
Precision Boosted Output Regulator ....................................... 17
Outline Dimensions ....................................................................... 18
Ordering Guides ......................................................................... 19
Automotive Products ................................................................. 20
REVISION HISTORY
1/12Rev. Q to Rev. R
Changes to Table 2 ............................................................................ 4
Changes to ADR01 Ordering Guide .......................................... 190
11/11Rev. P to Rev. Q
Changes to General Description Section ...................................... 1
Changes to Table 2 ............................................................................ 4
Changes to Table 3 ............................................................................ 5
Changes to Table 4 ............................................................................ 6
Changes to Table 5 ............................................................................ 7
10/11 Rev. O to Rev. P
Changes to Features Section, Applications Section, and General
Description Section .......................................................................... 1
Changes to ADR01 Electrical Characteristics Section
and Table 2 ......................................................................................... 4
Changes to ADR02 Electrical Characteristics Section
and Table 3 ......................................................................................... 5
Changes to ADR03 Electrical Characteristics Section
and Table 4 ......................................................................................... 6
Changes to ADR06 Electrical Characteristics Section
and Table 5 ......................................................................................... 7
Changes to Ordering Guides ......................................................... 19
Changes to Automotive Products Section ................................... 20
10/10Rev. N to Rev. O
Deleted Negative Reference Section and Figure 38.................... 16
Changes to ADR02 Ordering Guide ............................................ 19
7/10Rev. M to Rev. N
Changes to Figure 2 .......................................................................... 1
Changes to ADR01 Ordering Guide ............................................ 19
Added Automotive Products Section........................................... 20
4/10Rev. L to Rev. M
Changes to Features Section and General Description Section .. 1
Changes to Figure 41 ...................................................................... 17
Changes to Ordering Guides Section .......................................... 19
12/08Rev. K to Rev. L
Changes to Maximum Input Voltage ............................... Universal
Removed Die Version ........................................................ Universal
Changes to Table 2 ............................................................................. 3
Changes to Table 3 ............................................................................. 4
Changes to Table 4 ............................................................................. 5
Changes to Table 5 ............................................................................. 6
Deleted Table 6 and Figure 3 ............................................................ 7
Changes to Terminology Section .................................................... 8
Added Input and Output Capacitors Section ............................. 15
2/08Rev. J to Rev. K
Changes to Terminology Section .................................................... 9
Changes to Ordering Guide .......................................................... 19
3/07Rev. I to Rev. J
Renamed Parameters and Definitions Section .............................. 9
Changes to Temperature Monitoring Section ............................ 15
Changes to Ordering Guide .......................................................... 19
7/05Rev. H to Rev. I
Changes to Table 5 ............................................................................. 7
Updated Outline Dimensions ....................................................... 19
Changes to Ordering Guide .......................................................... 19
12/04Rev. G to Rev. H
Changes to ADR06 Ordering Guide ............................................ 20
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 3 of 20
9/04Rev. F to Rev. G
Changes to Table 2 ............................................................................ 4
Changes to Table 3 ............................................................................ 5
Changes to Table 4 ............................................................................ 6
Changes to Table 5 ............................................................................ 7
Changes to Ordering Guide ........................................................... 19
7/04Rev. E to Rev. F
Changes to ADR02 Electrical Characteristics, Table 2 ................ 4
Changes to Ordering Guide ........................................................... 19
2/04Rev. D to Rev. E
Added C grade .................................................................... Universal
Changes to Outline Dimensions ................................................... 19
Updated Ordering Guide ............................................................... 20
8/03Rev. C to Rev D
Added ADR06 ..................................................................... Universal
Change to Figure 27 ........................................................................ 13
6/03Rev. B to Rev C
Changes to Features Section ............................................................ 1
Changes to General Description Section ....................................... 1
Changes to Figure 2........................................................................... 1
Changes to Specifications Section ................................................... 2
Addition of Dice Electrical Characteristics and Layout ............... 6
Changes to Absolute Maximum Ratings Section .......................... 7
Updated SOIC (R-8) Outline Dimensions ................................... 19
Changes to Ordering Guide ........................................................... 20
2/03Rev. A to Rev. B
Added ADR03 .................................................................... Universal
Added TSOT-5 (UJ) Package............................................ Universal
Updated Outline Dimensions........................................................ 18
12/02Rev. 0 to Rev. A
Changes to Features Section ............................................................ 1
Changes to General Description ..................................................... 1
Table I Deleted ................................................................................... 1
Changes to ADR01 Specifications .................................................. 2
Changes to ADR02 Specifications .................................................. 3
Changes to Absolute Maximum Ratings Section ......................... 4
Changes to Ordering Guide ............................................................. 4
Updated Outline Dimensions........................................................ 12
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 4 of 20
SPECIFICATIONS
ADR01 ELECTRICAL CHARACTERISTICS
VIN = 12.0 V to 36.0 V, V IN = 12.0 V to 24.0 V for ADR01WARZ, TA = 25°C, unless otherwise noted.
Table 2.
Parameter Symbol Conditions Min Typ Max Unit
OUTPUT VOLTAGE VO A and C grades 9.990 10.000 10.010 V
INITIAL ACCURACY VOERR A and C grades 10 mV
0.1 %
OUTPUT VOLTAGE VO B grade 9.995 10.000 10.005 V
INITIAL ACCURACY VOERR B grade 5 mV
0.05 %
OUTPUT VOLTAGE VO ADR01WARZ 9.986 10.000 10.014 V
INITIAL ACCURACY VOERR ADR01WARZ 14 mV
0.14 %
A grade, 8-lead SOIC, −40°C < TA < +125°C 3 10 ppm/°C
A grade, 5-lead TSOT, 40°C < TA < +125°C 25 ppm/°C
A grade, 5-lead SC70, 40°C < T
A
< +125°C
25
ppm/°C
B grade, 8-lead SOIC, 40°C < TA < +125°C 1 3 ppm/°C
B grade, 5-lead TSOT,40°C < TA < +125°C 9 ppm/°C
B grade, 5-lead SC70, 40°C < TA < +125°C 9 ppm/°C
C grade, 8-lead SOIC, 40°C < TA < +125°C 10 40 ppm/°C
DROPOUT VOLTAGE VDO 2 V
LINE REGULATION ∆VO/∆VIN VIN = 12.0 V to 36.0 V, VIN = 12.0 V to 26.0 V for
ADR01WARZ, 40°C < TA < +125°C
7 30 ppm/V
LOAD REGULATION ∆VO/∆ILOAD ILOAD = 0 mA to 10 mA, 40°C < TA < +125°C,
VIN = 15.0 V
40 70 ppm/mA
QUIESCENT CURRENT IIN No load, 40°C < TA < +125°C 0.65 1 mA
VOLTAGE NOISE eN p-p 0.1 Hz to 10.0 Hz 20 µV p-p
VOLTAGE NOISE DENSITY eN 1 kHz 510 nV/Hz
TURN-ON SETTLING TIME tR 4 µs
LONG-TERM STABILITY1 ∆VO 1000 hours 50 ppm
OUTPUT VOLTAGE HYSTERESIS ∆VO_HYS 70 ppm
RIPPLE REJECTION RATIO RRR fIN = 10 kHz 75 dB
SHORT CIRCUIT TO GND ISC 30 mA
TEMPERATURE SENSOR
Voltage Output at TEMP Pin VTEMP 550 mV
Temperature Sensitivity TCVTEMP 1.96 mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 5 of 20
ADR02 ELECTRICAL CHARACTERISTICS
VIN = 7.0 V to 36.0 V, V IN = 7.0 V to 26.0 V for ADR02WARZ, TA = 25°C, unless otherwise noted.
Table 3.
Parameter Symbol Conditions Min Typ Max Unit
OUTPUT VOLTAGE VO A and C grades 4.995 5.000 5.005 V
INITIAL ACCURACY VOERR A and C grades 5 mV
0.1 %
OUTPUT VOLTAGE VO B grade 4.997 5.000 5.003 V
INITIAL ACCURACY VOERR B grade 3 mV
0.06 %
TEMPERATURE COEFFICIENT TCVO A grade, 8-lead SOIC, 40°C < TA < +125°C 3 10 ppm/°C
A grade, 5-lead TSOT, 40°C < TA < +125°C 25 ppm/°C
A grade, 5-lead SC70, 40°C < TA < +125°C 25 ppm/°C
A grade, 5-lead SC70, 55°C < T
A
< +125°C
30
ppm/°C
B grade, 8-lead SOIC, 40°C < TA < +125°C 1 3 ppm/°C
B grade, 5-lead TSOT, 40°C < TA < +125°C 9 ppm/°C
B grade, 5-lead SC70, 40°C < TA < +125°C 9 ppm/°C
C grade, 8-lead SOIC, 40°C < TA < +125°C 10 40 ppm/°C
DROPOUT VOLTAGE VDO 2 V
LINE REGULATION ∆VO/∆VIN VIN = 7.0 V to 36.0 V, VIN = 7.0 V to 26.0 V for
ADR02WARZ, 40°C < TA < +125°C
7 30 ppm/V
VIN = 7.0 V to 36.0 V, 55°C < TA < +125°C 7 40 ppm/V
LOAD REGULATION ∆VO/∆ILOAD ILOAD = 0 mA to 10 mA, 40°C < TA < +125°C,
VIN = 10.0 V
40 70 ppm/mA
ILOAD = 0 mA to 10 mA, 55°C < TA < +125°C,
VIN = 10.0 V
45 80 ppm/mA
QUIESCENT CURRENT IIN No load, 40°C < TA < +125°C 0.65 1 mA
VOLTAGE NOISE eN p-p 0.1 Hz to 10.0 Hz 10 µV p-p
VOLTAGE NOISE DENSITY eN 1 kHz 230 nV/√Hz
TURN-ON SETTLING TIME tR 4 µs
LONG-TERM STABILITY1 ∆VO 1000 hours 50 ppm
OUTPUT VOLTAGE HYSTERESIS ∆VO_HYS 70 ppm
55°C < TA < +125°C 80 ppm
RIPPLE REJECTION RATIO RRR fIN = 10 kHz 75 dB
SHORT CIRCUIT TO GND ISC 30 mA
TEMPERATURE SENSOR
Voltage Output at TEMP Pin VTEMP 550 mV
Temperature Sensitivity TCVTEMP 1.96 mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 6 of 20
ADR03 ELECTRICAL CHARACTERISTICS
VIN = 4.5 V to 36.0 V, V IN = 4.5 V to 26.0 V for ADR03WARZ, TA = 25°C, unless otherwise noted.
Table 4.
Parameter Symbol Conditions Min Typ Max Unit
OUTPUT VOLTAGE VO A and C grades 2.495 2.500 2.505 V
INITIAL ACCURACY VOERR A and C grades 5 mV
0.2 %
OUTPUT VOLTAGE
V
O
B grades
2.4975
2.5000
2.5025
V
INITIAL ACCURACY VOERR B grades 2.5 mV
0.1 %
TEMPERATURE COEFFICIENT
TCV
O
A grade, 8-lead SOIC, 40°C < T
A
< +125°C
3
10
ppm/°C
A grade, 5-lead TSOT, 40°C < TA < +125°C 25 ppm/°C
A grade, 5-lead SC70, 40°C < TA < +125°C 25 ppm/°C
A grade, 5-lead SC70, 55°C < TA < +125°C 30 ppm/°C
B grade, 8-lead SOIC, 40°C < TA < +125°C 1 3 ppm/°C
B grade, 5-lead TSOT, 40°C < T
A
< +125°C
9
ppm/°C
B grade, 5-lead SC70, 40°C < TA < +125°C 9 ppm/°C
C grade, 8-lead SOIC, 40°C < TA < +125°C 10 40 ppm/°C
DROPOUT VOLTAGE VDO 2 V
LINE REGULATION ∆VO/∆VIN VIN = 4.5 V to 36.0 V, VIN = 4.5 V to 26.0 V for
ADR03WARZ, –40°C < TA < +125°C
7 30 ppm/V
VIN = 4.5 V to 36.0 V, 55°C < TA < +125°C 7 40 ppm/V
LOAD REGULATION VO/∆ILOAD ILOAD = 0 mA to 10 mA, –40°C < TA < +125°C,
V
IN
= 7.0 V
25 70 ppm/mA
I
LOAD
= 0 mA to 10 mA, 55°C < T
A
< +125°C,
VIN = 7.0 V
45
80
ppm/mA
QUIESCENT CURRENT IIN No load, 40°C < TA < +125°C 0.65 1 mA
VOLTAGE NOISE eN p-p 0.1 Hz to 10.0 Hz 6 µV p-p
VOLTAGE NOISE DENSITY eN 1 kHz 230 nV/Hz
TURN-ON SETTLING TIME tR 4 µs
LONG-TERM STABILITY1 ∆VO 1000 hours 50 ppm
OUTPUT VOLTAGE HYSTERESIS ∆VO_HYS 70 ppm
55°C < TA < +125°C 80 ppm
RIPPLE REJECTION RATIO RRR fIN = 10 kHz 75 dB
SHORT CIRCUIT TO GND
I
SC
30
mA
TEMPERATURE SENSOR
Voltage Output at TEMP Pin VTEMP 550 mV
Temperature Sensitivity TCVTEMP 1.96 mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 7 of 20
ADR06 ELECTRICAL CHARACTERISTICS
VIN = 5.0 V to 36.0 V, VIN = 5.0 V to 26.0 V for ADR06WARZ, TA = 25°C, unless otherwise noted.
Table 5.
Parameter Symbol Conditions Min Typ Max Unit
OUTPUT VOLTAGE VO A and C grades 2.994 3.000 3.006 V
INITIAL ACCURACY VOERR A and C grades 6 mV
0.2 %
OUTPUT VOLTAGE VO B grade 2.997 3.000 3.003 V
INITIAL ACCURACY VOERR B grade 3 mV
0.1 %
TEMPERATURE COEFFICIENT TCVO A grade, 8-lead SOIC, 40°C < TA < +125°C 3 10 ppm/°C
A grade, 5-lead TSOT, 40°C < TA < +125°C 25 ppm/°C
A grade, 5-lead SC70, 40°C < TA < +125°C 25 ppm/°C
B grade, 8-lead SOIC, 40°C < TA < +125°C 1 3 ppm/°C
B grade, 5-lead TSOT, 40°C < TA < +125°C 9 ppm/°C
B grade, 5-lead SC70, 40°C < TA < +125°C 9 ppm/°C
C grade, 8-lead SOIC, 40°C < TA < +125°C 10 40 ppm/°C
DROPOUT VOLTAGE VDO 2 V
LINE REGULATION ∆VO/∆VIN VIN = 5.0 V to 36.0 V, VIN = 5.0 V to 26.0 V for
ADR06WARZ, 40°C < TA < +125°C
7 30 ppm/V
LOAD REGULATION ∆VO/∆ILOAD ILOAD = 0 mA to 10 mA, 40°C < TA < +125°C,
VIN = 7.0 V
40 70 ppm/mA
QUIESCENT CURRENT IIN No load, 40°C < TA < +125°C 0.65 1 mA
VOLTAGE NOISE eN p-p 0.1 Hz to 10.0 Hz 10 µV p-p
VOLTAGE NOISE DENSITY eN 1 kHz 510 nV/Hz
TURN-ON SETTLING TIME tR 4 µs
LONG-TERM STABILITY1 ∆VO 1000 hours 50 ppm
OUTPUT VOLTAGE HYSTERESIS ∆VO_HYS 70 ppm
RIPPLE REJECTION RATIO RRR fIN = 10 kHz 75 dB
SHORT CIRCUIT TO GND ISC 30 mA
TEMPERATURE SENSOR
Voltage Output at TEMP Pin
V
TEMP
550
mV
Temperature Sensitivity TCVTEMP 1.96 mV/°C
1 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period.
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 8 of 20
ABSOLUTE MAXIMUM RATINGS
Ratings are at 25°C, unless otherwise noted.
Table 6.
Parameter Rating
Supply Voltage 36.0 V
Output Short-Circuit Duration to GND Indefinite
Storage Temperature Range 65°C to +150°C
Operating Temperature Range 40°C to +125°C
Junction Temperature Range 65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) 300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 7. Thermal Resistance
Package Type θJA θJC Unit
5-Lead SC70 (KS-5) 376 189 °C/W
5-Lead TSOT (UJ-5)
230
146
°C/W
8-Lead SOIC (R-8)
130
43
°C/W
ESD CAUTION
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 9 of 20
TERMINOLOGY
Dropout Voltage (VDO)
Dropout voltage, sometimes referred to as supply voltage head-
room or supply output voltage differential, is defined as the
minimum voltage differential between the input and output
necessary for the device to operate, such as
VDO = (VINVOUT)min|IL = Constant
Because the dropout voltage depends upon the current passing
through the device, it is always specified for a given load current.
Temperature Coefficient (TCVO)
The temperature coefficient relates the change in output voltage
to the change in ambient temperature of the device, as normalized
by the output voltage at 25°C. This parameter is expressed in
ppm/°C and can be determined by the following equation:
( )
[ ]
Cppm/10
)25(
)()(
6
12
12
×
×
=TTCV
TVTV
TCV
OUT
OUTOUT
O
where:
VOUT(25°C) is the output voltage at 25°C.
VOUT(T1) is the output voltage at Temperature 1.
VOUT(T2) is the output voltage at Temperature 2.
Output Voltage Hysteresis (ΔVOUT_HYS)
Output voltage hysteresis represents the change in output
voltage after the device is exposed to a specified temperature
cycle. This may be expressed as either a shift in voltage or a
difference in parts per million from the nominal output as follows:
VOUT_HYS = VOUT(25°C) VOUT_TC [V]
]ppm[10
)25(
)25(
6
_
_
×
=CV
VCV
V
OUT
TCOUTOUT
HYSOUT
where:
VOUT(25°C) is the output voltage at 25°C.
VOUT_TC is the output voltage after temperature cycling.
Thermal hysteresis occurs as a result of forces exhibited upon
the internal die by its packaging. The effect is more pronounced
in parts with smaller packages.
Long-Term Stability (ΔVOUT_LTD)
Long-term stability refers to the shift in output voltage at 25°C
after 1000 hours of operation in a 25°C environment. This may
also be expressed as either a shift in voltage or a difference in
parts per million from the nominal output as follows:
ΔVOUT_LTD = |VOUT(t1) VOUT(t0)| [V]
]ppm[10
)(
)()(
Δ6
0
01
_×
=tV
tVtV
V
OUT
OUTOUT
LTDOUT
where,
VOUT(t0) is the VOUT at 25°C at Time 0.
VOUT(t1) is the VOUT at 25°C after 1000 hours of operation at 25°C.
Line Regulation
Line regulation refers to the change in output voltage in
response to a given change in input voltage, and is expressed in
either percent per volt, parts per million per volt, or microvolt
per volt change in input voltage. This parameter accounts for
the effects of self-heating.
Load Regulation
Load regulation refers to the change in output voltage in
response to a given change in load current, and is expressed
in either microvolts per milliampere, parts per million per
milliampere, or ohms of dc output resistance. This parameter
accounts for the effects of self-heating.
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 10 of 20
TYPICAL PERFORMANCE CHARACTERISTICS
TEMPERAT URE ( °C)
V
OUT
(V)
10.010
10.005
10.000
9.995
9.990
9.985
–40 –25 –10 520 35 50 65 80 95 110 125
02747-004
Figure 3. ADR01 Typical Output Voltage vs. Temperature
TEMPERAT URE ( °C)
VOUT (V)
5.008
5.004
5.000
4.996
4.992
–40 –25 –10 520 35 50 65 80 95 110 125
02747-005
Figure 4. ADR02 Typical Output Voltage vs. Temperature
TEMPERA
TURE ( °C)
–40
V
OUT
(V)
2.502
2.501
–25 –10 520 35 50 65 80 95 110 125
2.500
2.499
2.498
02747-006
Figure 5. ADR03 Typical Output Voltage vs. Temperature
TEMPERAT URE ( °C)
VOUT (V)
3.002
3.001
3.000
2.999
2.998
–40 –25 –10 520 35 50 65 80 95 110 125
02747-007
Figure 6. ADR06 Typical Output Voltage vs. Temperature
12 2816 20 24 32 36
SUPPLY CURRENT ( mA)
0.8
0.7
0.6
0.5
0.4
INP UT VOLTAGE (V)
+125°C
+25°C
–40°C
02747-008
Figure 7. ADR01 Supply Current vs. Input Voltage
12 2816 20 24 32 368
SUPPLY CURRENT ( mA)
+125°C
0.8
0.7
0.6
0.5
0.4
INP UT VOLTAGE (V)
+25°C
–40°C
02747-009
Figure 8. ADR02 Supply Current vs. Input Voltage
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 11 of 20
INP UT VOLTAGE (V)
5
SUPPLY CURRENT ( mA)
10 15 20 25 30 35 36
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
0.85
+125°C
–40°C
+25°C
02747-010
Figure 9. ADR03 Supply Current vs. Input Voltage
INPUT VOLTAGE (V)
5
SUPP LY CURRENT ( mA)
10 15 20 25 30 35 36
0.40
0.45
0.50
0.55
0.60
0.65
0.70
0.75
0.80
+125°C
–40°C
+25°C
02747-011
Figure 10. ADR06 Supply Current vs. Input Voltage
40
25
20
0
85 125
30
10
I
L
= 0mA TO 10mA
LOAD REGULATION (ppm/mA)
TEMPERATURE (°C)
V
IN
= 36V
V
IN
= 14V
500–40
–40
–30
–20
–10
02747-012
Figure 11. ADR01 Load Regulation vs. Temperature
40
20
0
50
85 125
30
10
IL = 0mA TO 5mA
LOAD REGULATION (ppm/mA)
TEMPERATURE (°C)
VIN = 36V
VIN = 8V
25
0–40
–20
–10
02747-013
Figure 12. ADR02 Load Regulation vs. Temperature
LOAD REGULATION (ppm/mA)
0
10
20
30
40
50
60
TEMPERATURE (°C)
–40 –25 –10 520 35 50 65 80 95 110 125
V
IN
= 36V
V
IN
= 7V
I
L
= 0mA TO 10mA
02747-014
Figure 13. ADR03 Load Regulation vs. Temperature
LOAD REGUL ATION (ppm/mA)
–30
–20
–10
0
10
20
40
30
TEMPERAT URE ( °C)
–40 –25 –10 520 35 50 65 80 95 110 125
VIN = 36V
IL = 0mA TO 10mA
VIN = 7V
02747-015
Figure 14. ADR06 Load Regulation vs. Temperature
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 12 of 20
0
–4
2
–2
–6
–8
TEMPERAT URE ( °C)
LINE REG ULATION (ppm/V)
–10
–40 –25 –10 520 35 50 65 80 95 110 125
V
IN
= 14V TO 36V
02747-016
Figure 15. ADR01 Line Regulation vs. Temperature
4
–4
8
0
–8
TEMPERAT URE ( °C)
LINE REG ULATION (ppm/V)
V
IN
= 8V TO 36V
–40 –25 –10 520 35 50 65 80 95 110 125
02747-017
Figure 16. ADR02 Line Regulation vs. Temperature
LINE REG ULATION (ppm/mV)
–4
–2
0
2
4
TEMPERAT URE ( °C)
–40 –25 –10 520 35 50 65 80 95 110 125
VIN = 5V TO 36V
02747-018
Figure 17. ADR03 Line Regulation vs. Temperature
LINE REG ULATION (ppm/V)
–4
–2
2
4
6
0
8
10
TEMPERAT URE ( °C)
–40 –25 –10 520 35 50 65 80 95 110 125
VIN = 6V TO 36V
02747-019
Figure 18. ADR06 Line Regulation vs. Temperature
3
1
5
2
0
4
460 2
LOAD CURRENT (mA)
810
DIFFERENTIAL VOLTAGE ( V)
–40°C
+125°C
+25°C
02747-020
Figure 19. ADR01 Minimum Input-Output
Voltage Differential vs. Load Current
46
8
0
2
0
4
2
+25°C
LOAD CURRENT ( mA)
810
–40°C
+125°C
DIFFERENTIAL VOLTAGE (V)
02747-021
Figure 20. ADR02 Dropout Voltage vs. Load Current
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 13 of 20
3
1
5
2
0
4
460 2
LOAD CURRENT (mA)
810
DIFFERENTIAL VOLTAGE ( V)
+125°C
+25° C
–40°C
6
02747-022
Figure 21. ADR03 Dropout Voltage vs. Load Current
2.0
1.0
4.0
3.5
3.0
1.5
0
0.5
2.5
0 2 4 6
LOAD CURRENT (mA)
810
DIFFERENTIAL VOLTAGE ( V)
+125°C
+25° C
–40°C
4.5
02747-023
Figure 22. ADR06 Dropout Voltage vs. Load Current
0
0.50 2 4 6
T
A
= 25° C
LOAD CURRENT ( mA)
810
QUIESCENT CURRENT ( mA)
0.55
0.60
0.65
0.70
02747-024
Figure 23. ADR01 Quiescent Current vs. Load Current
02747-025
TIME (1s/DIV)
1µV/DIV
Figure 24. ADR02 Typical Noise Voltage 0.1 Hz to 10.0 Hz
02747-026
TIME (1ms/DIV )
50µV/DIV
Figure 25. ADR02 Typical Noise Voltage 10 Hz to 10 kHz
02747-027
TIME (2ms/DIV )
VOUT 5V/DIV
NO LOAD CAPACITOR
NO INPUT CAPACITOR
10V
8V
Figure 26. ADR02 Line Transient Response
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 14 of 20
02747-028
TIME (1ms/DIV )
LOAD = 5mA
V
OUT
100mV/DIV
V
IN
5V/DIV
NO LOAD CAPACITOR
LOAD OFF LOAD ON
Figure 27. ADR02 Load Transient Response
02747-029
TIME (1ms/DIV )
LOAD = 5mA
V
OUT
100mV/DIV
V
IN
5V/DIV
LOAD OFF LOAD ON
C
LOAD
= 100nF
Figure 28. ADR02 Load Transient Response
02747-030
TIME (4µs/DIV)
CIN = 0.01µF
NO LOAD CAPACITOR
VIN 10V/DIV
VOUT 5V/DIV
Figure 29. ADR02 Turn-Off Response
02747-031
TIME (4µs/DIV)
C
IN
= 0.01µF
NO LOAD CAPACITOR V
IN
10V/DIV
V
OUT
5V/DIV
Figure 30. ADR02 Turn-On Response
02747-032
TIME (4µs/DIV)
CL = 0.01µF
NO INPUT CAPACITOR
VIN 10V/DIV
VOUT 5V/DIV
Figure 31. ADR02 Turn-Off with No Input Capacitor
02747-033
TIME (4µs/DIV)
CL = 0.01µF
NO INPUT CAPACITOR VIN 10V/DIV
VOUT 5V/DIV
Figure 32. ADR02 Turn-Off with No Input Capacitor
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 15 of 20
APPLICATIONS INFORMATION
OVERVIEW
The ADR01/ADR02/ADR03/ADR06 are high precision, low
drift 10.0 V, 5.0 V, 2.5 V, and 3.0 V voltage references available
in an ultracompact footprint. The 8-lead SOIC versions of the
devices are drop-in replacements of the REF01/REF02/REF03
sockets with improved cost and performance.
These devices are standard band gap references (see Figure 34).
The band gap cell contains two NPN transistors (Q18 and Q19)
that differ in emitter area by 2×. The difference in their VBE
produces a proportional-to-absolute temperature current (PTAT)
in R14, and, when combined with the VBE of Q19, produces a
band gap voltage, VBG, that is almost constant in temperature.
With an internal op amp and the feedback network of R5 and
R6, VO is set precisely at 10.0 V, 5.0 V, 2.5 V, and 3.0 V for the
ADR01, ADR02, ADR06, and ADR03, respectively. Precision
laser trimming of the resistors and other proprietary circuit
techniques are used to further enhance the initial accuracy,
temperature curvature, and drift performance of the ADR01/
ADR02/ADR03/ADR06.
The PTAT voltage is made available at the TEMP pin of the
ADR01/ADR02/ADR03/ADR06. It has a stable 1.96 mV/°C
temperature coefficient, such that users can estimate the
temperature change of the device by knowing the voltage
change at the TEMP pin.
APPLYING THE ADR01/ADR02/ADR03/ADR06
Input and Output Capacitors
Although the ADR01/ADR02/ADR03/ADR06 are designed to
function stably without any external components, connecting a
0.1 μF ceramic capacitor to the output is highly recommended
to improve stability and filter out low level voltage noise. An
additional 1 μF to 10 μF electrolytic, tantalum, or ceramic
capacitor can be added in parallel to improve transient per-
formance in response to sudden changes in load current;
however, the designer should keep in mind that doing so
increases the turn-on time of the device.
A 1 μF to 10 μF electrolytic, tantalum or ceramic capacitor can
also be connected to the input to improve transient response in
applications where the supply voltage may fluctuate. An addi-
tional 0.1 μF ceramic capacitor should be connected in parallel
to reduce supply noise. Mount both input and output capacitors
as close to the device pins as possible.
Output Adjustment
The ADR01/ADR02/ADR03/ADR06 trim terminal can be used
to adjust the output voltage over a nominal voltage. This feature
allows a system designer to trim system errors by setting the
reference to a voltage other than 10.0 V/5.0 V/2.5 V/3.0 V. For
finer adjustment, add a series resistor of 470 kΩ. With the con-
figuration shown in Figure 35, the ADR01 can be adjusted from
9.70 V to 10.05 V, the ADR02 can be adjusted from 4.95 V to
5.02 V, the ADR06 can be adjusted from 2.8 V to 3.3 V, and the
ADR03 can be adjusted from 2.3 V to 2.8 V. Adjustment of the
output does not significantly affect the temperature performance
of the device, provided the temperature coefficients of the resis-
tors are relatively low.
U1
ADR01/
ADR02/
ADR03/
ADR06
V
O
C2
0.1µF
C1
0.1µF
V
IN
V
IN
V
OUT
TEMP TRIM
GND
02747-035
Figure 33. Basic Configuration
R1 R2 R3 R4 V
IN
Q23
Q1 Q2 Q7 Q8
Q9
Q3 Q10
D1
D2
Q4 V
O
D3 C1
R13 Q12 Q13 R5
I1
R12
Q14 Q15
V
BG
R20 TRIM
Q18
TEMP
R27 Q19
Q16 Q17
Q20 R6
R42
R41
R24
R32
R11
R17
R14
GND
02747-034
Figure 34. Simplified Schematic Diagram
U1
ADR01/
ADR02/
ADR03/
ADR06
V
IN
V
OUT
TEMP TRIM
GND
V
IN
V
O
POT
10kΩ
R2
1kΩ
R1
470kΩ
02747-036
Figure 35. Optional Trim Adjustment
Temperature Monitoring
As described at the end of the Overview section, the ADR01/
ADR02/ADR03/ADR06 provide a TEMP output (Pin 1 in Figure 1
and Pin 3 in Figure 2) that varies linearly with temperature.
This output can be used to monitor the temperature change in the
system. The voltage at VTEMP is approximately 550 mV at 25°C,
and the temperature coefficient is approximately 1.96 mV/°C
(see Figure 36). A voltage change of 39.2 mV at the TEMP pin
corresponds to a 20°C change in temperature.
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 16 of 20
12525 50 75 100
0.40
0.80
0.75
0.70
0.65
0.60
0.55
0.50
0.45
–25 0–50
V
IN
= 15V
SAMPLE SIZE = 5
V
TEMP
(V)
TEMPERATURE (°C)
ΔV
TEMP
/ΔT ≈ 1.96mV/°C
02747-037
Figure 36. Voltage at TEMP Pin vs. Temperature
The TEMP function is provided as a convenience rather than a
precise feature. Because the voltage at the TEMP node is
acquired from the band gap core, current pulling from this pin
has a significant effect on VOUT. Care must be taken to buffer the
TEMP output with a suitable low bias current op amp, such as
the AD8601, AD820, or OP1177, all of which result in less than
a 100 µV change in ∆VOUT (see Figure 37). Without buffering,
even tens of microamps drawn from the TEMP pin can cause
VOUT to fall out of specification.
U2
15V
U1
ADR01/
ADR02/
ADR03/
ADR06
VIN VOUT
TEMP TRIM
GND
VO
V
V+
OP1177
VTEMP
1.9mVC
VIN
02747-038
Figure 37. Temperature Monitoring
LOW COST CURRENT SOURCE
Unlike most references, the ADR01/ADR02/ADR03/ADR06
employ an NPN Darlington in which the quiescent current
remains constant with respect to the load current, as shown in
Figure 23. As a result, a current source can be configured as
shown in Figure 38 where ISET = (VOUT − VL)/RSET. IL is simply
the sum of ISET and IQ. Although simple, IQ varies typically from
0.55 mA to 0.65 mA, limiting this circuit to general-purpose
applications.
ADR01/
ADR02/
ADR03/
ADR06
VOUT
GND
VIN IIN
ISET = (VOUT – VL)/RSET
RSET
IQ0.6mA
IL = ISET + IQ
VL
RL
02747-040
Figure 38. Low Cost Current Source
PRECISION CURRENT SOURCE WITH
ADJUSTABLE OUTPUT
Alternatively, a precision current source can be implemented
with the circuit shown in Figure 39. By adding a mechanical or
digital potentiometer, this circuit becomes an adjustable current
source. If a digital potentiometer is used, the load current is
simply the voltage across Terminal B to Terminal W of the
digital potentiometer divided by RSET.
SET
REF
L
R
DV
I×
=
(1)
where D is the decimal equivalent of the digital potentiometer
input code.
U2
+12V
–12V
W
B
A
U1
ADR01/
ADR02/
ADR03/
ADR06
V
IN
V
OUT
TEMP TRIM
GND
V
V+
OP1177
–5V TO V
L
AD5201
0V TO (5V + V
L
)
+12V
R
SET
1kΩ
R
L
I
L
V
L
1kΩ
100k
02747-041
Figure 39. Programmable 0 mA to 5 mA Current Source
To optimize the resolution of this circuit, dual-supply op amps
should be used because the ground potential of ADR02 can
swing from −5.0 V at zero scale to VL at full scale of the
potentiometer setting.
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 17 of 20
PROGRAMMABLE 4 mA TO 20 mA CURRENT
TRANSMITTER
Because of their precision, adequate current handling, and small
footprint, the devices are suitable as the reference sources for
many high performance converter circuits. One of these
applications is the multichannel 16-bit, 4 mA to 20 mA current
transmitter in the industrial control market (see Figure 40).
This circuit employs a Howland current pump at the output to
yield better efficiency, a lower component count, and a higher
voltage compliance than the conventional design with op amps
and MOSFETs. In this circuit, if the resistors are matched such
that R1 = R1, R2 = R2, R3 = R3, the load current is
N
REF
L
DV
R3
R1R3)(R2
I2
×
×
+
=
(2)
where D is similarly the decimal equivalent of the DAC input
code and N is the number of bits of the DAC.
According to Equation 2, R3 can be used to set the sensitivity.
R3 can be made as small as necessary to achieve the current
needed within U4 output current driving capability. Alter-
natively, other resistors can be kept high to conserve power.
In this circuit, the AD8512 is capable of delivering 20 mA of
current, and the voltage compliance approaches 15.0 V.
U1
15V V
IN
V
OUT
GND
TEMP TRIM
U1 = ADR01/ADR02/ADR03/ADR06, REF 01
U2 = AD5543/AD5544/AD5554
U3, U4 = AD8512
U2
5V
10V
+15V
–15V
V
DD
V
REF
GND
RF IO
IO
AD5544
DIGITAL INPUT
CODE 20%–100% FULL SCALE
U3 V
X
0V TO –10V
R1
150kΩ
R2
15kΩ
U4
C1
10pF
VP
R3
50Ω
AD8512
R3'
50Ω
V
L
R1'
150kΩ LOAD
500Ω
4mA TO 20m A
VN
V
O
R2'
15kΩ
02747-042
Figure 40. Programmable 4 mA to 20 mA Transmitter
The Howland current pump yields a potentially infinite output
impedance, that is highly desirable, but resistance matching is
critical in this application. The output impedance can be deter-
mined using Equation 3. As shown by this equation, if the
resistors are perfectly matched, ZO is infinite. Alternatively, if
they are not matched, ZO is either positive or negative. If the
latter is true, oscillation can occur. For this reason, connect
Capacitor C1 in the range of 1 pF to 10 pF between VP and the
output terminal of U4 to filter any oscillation.
==
1
R1R2
R2R1R1
I
V
Zt
t
O
(3)
In this circuit, an ADR01 provides the stable 10.000 V reference
for the AD5544 quad 16-bit DAC. The resolution of the adjust-
able current is 0.3 µA/step; the total worst-case INL error is
merely 4 LSBs. Such error is equivalent to 1.2 µA or a 0.006%
system error, which is well below most systems’ requirements.
The result is shown in Figure 41 with measurement taken at 25°C
and 70°C; total system error of 4 LSBs at both 25°C and 70°C.
5
–1 0655368192 16384 24576 32768 40960 49152 57344
4
3
2
1
0
CODE ( Decimal)
INL (LSB)
RL= 500Ω
IL= 0mA TO 20m A
25°C
70°C
02747-043
Figure 41. Result of Programmable 4 mA to 20 mA Current Transmitter
PRECISION BOOSTED OUTPUT REGULATOR
A precision voltage output with boosted current capability can
be realized with the circuit shown in Figure 42. In this circuit,
U2 forces VO to be equal to VREF by regulating the turn-on of
N1, thereby making the load current furnished by VIN. In this
configuration, a 50 mA load is achievable at VIN of 15.0 V.
Moderate heat is generated on the MOSFET, and higher current
can be achieved with a replacement of a larger device. In
addition, for a heavy capacitive load with a fast edging input
signal, a buffer should be added at the output to enhance the
transient response.
U2
15V
N1
200Ω
U1
ADR01/
ADR02/
ADR03/
ADR06
V
IN
V
OUT
TEMP TRIM
GND V
V+
OP1177
2N7002
V
IN
V
O
R
L
1µF
C
L
02747-044
C
1
1000pF
R
2
100Ω
R
1
100Ω
Figure 42. Precision Boosted Output Regulator
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 18 of 20
OUTLINE DIMENSIONS
COMPLIANT TO JEDEC STANDARDS MO-203-AA
1.00
0.90
0.70
0.46
0.36
0.26
2.20
2.00
1.80
2.40
2.10
1.80
1.35
1.25
1.15
072809-A
0.10 MAX
1.10
0.80
0.40
0.10
0.22
0.08
3
1 2
45
0.65 BSC
COPLANARITY
0.10
SEATING
PLANE
0.30
0.15
Figure 43. 5-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-5)
Dimensions shown in millimeters
100708-A
*COM P LIANT TO JE DE C S TANDARDS MO-193-AB WITH
THE E X CE P TIO N OF P ACKAGE HEIGHT AND THICKNE S S .
1.60 BSC 2.80 BS C
1.90
BSC
0.95 BSC
0.20
0.08
0.60
0.45
0.30
0.50
0.30
0.10 MAX
*1.00 MAX
*0.90 MAX
0.70 MIN
2.90 BS C
5 4
1 2 3
SEATING
PLANE
Figure 44. 5-Lead Thin Small Outline Transistor Package [TSOT]
(UJ-5)
Dimensions shown in millimeters
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN D
ESIGN.
COMPLIANT TO JEDEC STANDARDS MS-012-AA
012407-A
0.25 (0.0098)
0.17 (0.0067)
1.27 (0.0500)
0.40 (0.0157)
0.50 (0.0196)
0.25 (0.0099) 45°
1.75 (0.0688)
1.35 (0.0532)
SEATING
PLANE
0.25 (0.0098)
0.10 (0.0040)
4
1
8 5
5.00(0.1968)
4.80(0.1890)
4.00 (0.1574)
3.80 (0.1497)
1.27 (0.0500)
BSC
6.20 (0.2441)
5.80 (0.2284)
0.51 (0.0201)
0.31 (0.0122)
COPLANARITY
0.10
Figure 45. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Data Sheet ADR01/ADR02/ADR03/ADR06
Rev. R | Page 19 of 20
ORDERING GUIDES
ADR01 Ordering Guide
Model1, 2
Output
Voltage
VO (V)
Initial Accuracy Temperature
Coefficient
(ppm/°C)
Temperature
Range
Package
Description
Package
Option
Ordering
Quantity Branding (mV) (%)
ADR01ARZ 10 10 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR01ARZ-REEL7 10 10 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR01BRZ 10 5 0.05 3 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR01BRZ-REEL7
10
5
0.05
3
40°C to +125°C
8-Lead SOIC_N
R-8
1000
ADR01WARZ-R7 10 14 0.14 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR01WARZ-RL 10 14 0.14 10 40°C to +125°C 8-Lead SOIC_N R-8 2,500
ADR01AUJZ-REEL7 10 10 0.1 25 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1E
ADR01BUJZ-REEL7 10 5 0.05 9 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1F
ADR01AKSZ-REEL7 10 10 0.1 25 40°C to +125°C 5-Lead SC70 KS-5 3,000 R1E
ADR01BKSZ-REEL7 10 5 0.05 9 40°C to +125°C 5-Lead SC70 KS-5 3,000 R1F
ADR01CRZ 10 10 0.1 40 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR01CRZ-REEL 10 10 0.1 40 40°C to +125°C 8-Lead SOIC_N R-8 2,500
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
ADR02 Ordering Guide
Model1, 2
Output
Voltage
VO (V)
Initial Accuracy Temperature
Coefficient
(ppm/°C)
Temperature
Range
Package
Description
Package
Option
Ordering
Quantity Branding (mV) (%)
ADR02AR 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR02AR-REEL 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 2,500
ADR02AR-REEL7 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR02ARZ 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR02ARZ-REEL 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 2,500
ADR02ARZ-REEL7 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR02WARZ-REEL 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 2,500
ADR02WARZ-REEL7 5 5 0.1 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR02BRZ 5 3 0.06 3 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR02BRZ-REEL7 5 3 0.06 3 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR02AUJZ-REEL7 5 5 0.1 25 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1G
ADR02BUJZ-R2
5
3
0.06
9
40°C to +125°C
5-Lead TSOT
UJ-5
250
R1H
ADR02BUJZ-REEL7 5 3 0.06 9 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1H
ADR02AKSZ-REEL7 5 5 0.1 25 40°C to +125°C 5-Lead SC70 KS-5 3,000 R1G
ADR02BKSZ-REEL7 5 3 0.06 9 40°C to +125°C 5-Lead SC70 KS-5 3,000 R1H
ADR02CRZ 5 5 0.1 40 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR02CRZ-REEL
5
5
0.1
40
40°C to +125°C
8-Lead SOIC_N
R-8
2,500
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
ADR01/ADR02/ADR03/ADR06 Data Sheet
Rev. R | Page 20 of 20
ADR03 Ordering Guide
Model1, 2
Output
Voltage
VO (V)
Initial Accuracy Temperature
Coefficient
(ppm/°C)
Temperature
Range
Package
Description
Package
Option
Ordering
Quantity Branding
(mV) (%)
ADR03AR-REEL7 2.5 5 0.2 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR03ARZ 2.5 5 0.2 10 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR03ARZ-REEL7 2.5 5 0.2 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR03WARZ-R7 2.5 5 0.2 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR03WARZ-RL
2.5
5
0.2
10
40°C to +125°C
8-Lead SOIC_N
R-8
2500
ADR03BR 2.5 2.5 0.1 3 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR03BRZ 2.5 2.5 0.1 3 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR03BRZ-REEL7 2.5 2.5 0.1 3 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR03AUJZ-REEL7 2.5 5 0.2 25 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1J
ADR03BUJZ-REEL7 2.5 2.5 0.1 9 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1K
ADR03AKSZ-REEL7 2.5 5 0.2 25 40°C to +125°C 5-Lead SC70 KS-5 3,000 R1J
ADR03BKSZ-REEL7 2.5 2.5 0.1 9 40°C to +125°C 5-Lead SC70 KS-5 3,000 R1K
ADR03CRZ 2.5 5 0.1 40 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR03CRZ-REEL 2.5 5 0.1 40 40°C to +125°C 8-Lead SOIC_N R-8 2,500
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
ADR06 Ordering Guide
Model1, 2
Output
Voltage
VO (V)
Initial Accuracy
Temperature
Coefficient
(ppm/°C)
Temperature
Range
Package
Description
Package
Option
Ordering
Quantity Branding
(mV) (%)
ADR06ARZ 3 6 0.2 10 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR06ARZ-REEL7 3 6 0.2 10 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR06WARZ-R7
3
6
0.2
10
40°C to +125°C
8-Lead SOIC
_
N
R-8
1,000
ADR06WARZ-RL 3 6 0.2 10 40°C to +125°C 8-Lead SOIC_N R-8 2500
ADR06BRZ 3 3 0.1 3 40°C to +125°C 8-Lead SOIC_N R-8 98
ADR06BRZ-REEL7 3 3 0.1 3 40°C to +125°C 8-Lead SOIC_N R-8 1,000
ADR06AUJZ-REEL7 3 6 0.2 25 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1L
ADR06BUJZ-REEL7 3 3 0.1 9 40°C to +125°C 5-Lead TSOT UJ-5 3,000 R1M
ADR06AKSZ-REEL7
3
6
0.2
25
40°C to +125°C
5-Lead SC70
KS-5
3,000
R1L
ADR06BKSZ-REEL7 3 3 0.1 9 40°C to +125°C 5-Lead SC70 KS-5 3,000 R1M
ADR06CRZ-REEL 3 6 0.2 40 40°C to +125°C 8-Lead SOIC_N R-8 2,500
1 Z = RoHS Compliant Part.
2 W = Qualified for automotive applications.
AUTOMOTIVE PRODUCTS
The ADR01W, ADR02W, ADR03W and ADR06W models are available with controlled manufacturing to support the quality and
reliability requirements of automotive applications. Note that these automotive models may have specifications that differ from the
commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade
products shown are available for use in automotive applications. Contact your local Analog Devices account representative for specific
product ordering information and to obtain the specific Automotive Reliability reports for these models.
©20022012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D02747-0-1/12(R)