SP - 116 - 앮- 앮 - 앮- 앮
Switch Configuration
N 1xN (Specify N from 9 to 16)
Input Connector Type (Tight Buffer)
FC FC/SPC
FC/APC FC/APC
FC/UPC FC/UPC
SC SC/SPC
SC/APC SC/APC
SC/UPC SC/UPC
ST ST/SPC
ST/UPC ST/UPC
LC LC/UPC
N None
Output Connector Type (Ribbon Fiber)
MPX MPX
MPO MPO
MT MT
MTP MTP
N None
Pigtail Length (Input and Output)
1 1 meter
X Specify X meters
Wavelength range
Insertion loss2
Back-reflection
Switching time
Cross-talk
PDL2
Switching voltage
Switching cur rent
Output fiber type
Input fiber type
Input fiber Jacket
Operating temperature
Storage temperature
Humidity
1290.0 - 1625.0 nm
3.5 dB max.
-55 dB max.
100 ms max.
-50 dB max.
0.1 dB max.
4.5 VDC min., 5.2 VDC max.
400 mA
8-fiber ribbon
9/125 Corning SMF-28,
0.9 mm, tight buffer
-20°C to +65°C
-40°C to +85°C
60°C/90%RH/14 days
1. All specifications referenced without connectors.
2. Measured at 1550 nm.
Switches
39
1x16 Prism Switch
Switches
U.S. patented. Specifications subject to change. Copyright ©2001 DiCon Fiberoptics, Inc. All rights reserved.
38
Switches
20.0
20.00
25.00
PORT 1-8
PORT 9-16
10.0
107.0
4.0
175.00
COM
115.0
Housing Dimensions
1x16 Switch
DiCon’s 1x16 Prism Switch provides channel selection
between a single input fiber and one of sixteen output fibers.
Actuated electrically and operating independently of data rate
and signal for mat, the component uses moving prisms
between fixed collimators. DiCon’s 1x16 Prism Switch is
housed in a compact, environmentally stable package
designed for mounting on a printed circuit boar d or within a
module.
Features
•Very fast switching speed
•Ultra-low insertion loss
•Built-in position sensor
•Low polarization-dependent loss
•Wide wavelength range
Applications
1x16 switches are used for network monitoring applications with up
to 16 monitored fibers.
1x16 Prism Switch
DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510)528-0427 Fax. (510)525-5776 www.diconfiber.com
Ordering Information
Specifications1
