Switches Specifications1 Ordering Information 1x16 Prism Switch DiCon's 1x16 Prism Switch provides channel selection between a single input fiber and one of sixteen output fibers. Actuated electrically and operating independently of data rate and signal format, the component uses moving prisms between fixed collimators. DiCon's 1x16 Prism Switch is housed in a compact, environmentally stable package designed for mounting on a printed circuit board or within a module. SP - 116 - - - - Wavelength range 1290.0 - 1625.0 nm Insertion loss2 3.5 dB max. Switch Configuration Back-reflection -55 dB max. N Switching time 100 ms max. Cross-talk -50 dB max. PDL2 0.1 dB max. Switching voltage 4.5 VDC min., 5.2 VDC max. Switching current 400 mA Output fiber type 8-fiber ribbon Input fiber type 9/125 Corning SMF-28, Input fiber Jacket 0.9 mm, tight buffer Operating temperature -20C to +65C Storage temperature -40C to +85C Output Connector Type (Ribbon Fiber) Humidity 60C/90%RH/14 days MPX MPO MT MTP N 1xN (Specify N from 9 to 16) Input Connector Type (Tight Buffer) FC FC/APC FC/UPC SC SC/APC SC/UPC ST ST/UPC LC N 1. All specifications referenced without connectors. 2. Measured at 1550 nm. FC/SPC FC/APC FC/UPC SC/SPC SC/APC SC/UPC ST/SPC ST/UPC LC/UPC None MPX MPO MT MTP None Pigtail Length (Input and Output) Features * * * * * 1x16 Prism Switch Switches Very fast switching speed Ultra-low insertion loss Built-in position sensor Low polarization-dependent loss Wide wavelength range 1 X Housing Dimensions 1 meter Specify X meters 175.00 20.0 4.0 10.0 Applications 115.0 107.0 PORT 9-16 PORT 1-8 25.00 COM Switches 1x16 switches are used for network monitoring applications with up to 16 monitored fibers. 20.00 1x16 Switch U.S. patented. Specifications subject to change. Copyright (c)2001 DiCon Fiberoptics, Inc. All rights reserved. 38 DiCon Fiberoptics, Inc. 1689 Regatta Blvd. Richmond, CA 94804 Tel. (510)528-0427 Fax. (510)525-5776 www.diconfiber.com 39