REV. C
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
a
REF01
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700 www.analog.com
Fax: 781/326-8703 © Analog Devices, Inc., 2002
10 V Precision
Voltage Reference
SIMPLIFIED SCHEMATIC
C1
R3
R6
R4
R5
R1
Q1
R2
R10
OUTPUT
GROUND
R12 16.7k
TRIM
Q19
R15
INPUT
Q15
Q18
Q16
Q13
Q21
Q17
R13
Q20
Q4 Q3
Q5
Q6
Q9
Q7 Q14
Q12
Q11
Q8
R8 R7 R14
Q10
Q2
R11 2k
R9 50k
4
5
6
1.23V
2
FEATURES
10 V Output, 0.3% Max
Adjustment Range, 3% Min
Excellent Temperature Stability, 8.5 ppm/C Max
Low Noise, 30 V p-p Max
Low Supply Current, 1.4 mA Max
Wide Input Voltage Range, 12 V to 40 V
High Load Driving Capability, 20 mA
No External Components
Short Circuit Proof
GENERAL DESCRIPTION
The REF01 precision voltage reference provides a stable 10 V
output that can be adjusted over a 3% range with minimal effect
on temperature stability. Single-supply operation over an input
voltage range of 12 V to 40 V, a low current drain of 1 mA,
and
excellent temperature stability are achieved with an improved
band gap design. Low cost, low noise, and low power make the
REF01 an excellent choice whenever a stable voltage reference
is required. Applications include D/A and A/D converters,
portable instrumentation, and digital voltmeters. Full military
temperature range devices with screening to MIL-STD-883
are available. For new designs, please refer to ADR01.
Epoxy MINI-DIP (P-Suffix)
8-Lead Hermetic DIP (Z-Suffix)
8-Lead SO (S-Suffix)
8
7
6
5
1
2
3
4
NC = NO CONNECT*
NC
VIN
NC
NC
NC
VOUT
TRIMGND
TOP VIEW
(Not to Scale)
REF01
TO-99 (J-Suffix)
7
8
1
4
5
6
3
2
NC
VOUT
TRIM
GROUND
(CASE)
NC
NC
VIN
NC
NC = NO CONNECT*
PIN CONFIGURATION
*NC = No Connect. Do not connect anything on these pins as some
of them are reserved for factory testing purposes.
REV. C
–2–
REF01–SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
REF01A/E REF01/H
Parameter Symbol Conditions Min Typ Max Min Typ Max Unit
Output Voltage V
O
I
L
= 0 mA 9.97 10.00 10.03 9.95 10.00 10.05 V
Output Adjustment Range V
TRIM
R
P
= 10 kΩ±3.0 ±3.3 ±3.0 ±3.3 %
Output Voltage Noise
1
e
n p-p
0.1 Hz to 10 Hz 20 30 20 30 µV p-p
Line Regulation
2
V
IN
= 13 V to 33 V 0.006 0.010 0.006 0.010 %/V
Load Regulation
2
I
L
= 0 mA to 10 mA 0.005 0.008 0.006 0.010 %/mA
Turn-On Settling Time
3
t
ON
To ±0.1% of Final Value 5 5 µs
Quiescent Supply Current I
SY
No Load 1.0 1.4 1.0 1.4 mA
Load Current I
L
10 21 10 21 mA
Sink Current
4
I
S
–0.3 –0.5 –0.3 –0.5 mA
Short Circuit Current I
SC
V
O
= 0 30 30 mA
ELECTRICAL SPECIFICATIONS
REF01A/E REF01/H
Parameter Symbol Conditions Min Typ Max Min Typ Max Unit
Output Voltage Change V
OT
0°C T
A
70°C0.02 0.06 0.07 0.17 %
with Temperature
5, 6
–55°C T
A
+125°C0.06 0.15 0.18 0.45 %
Output Voltage TCV
O
3.0 8.5 10.0 25.0
ppm/°C
Temperature Coefficient
7
Change in V
O
Temperature R
P
= 10 kΩ0.7 0.7 ppm/%
Coefficient with Output
Adjustment
Line Regulation 0°C T
A
70°C0.007 0.012 0.007 0.012
(V
IN
= 13 V to 33 V)
2
–55°C T
A
+125°C0.009 0.015 0.009 0.015 %/V
Load Regulation 0°C T
A
70°C0.006 0.010 0.007 0.012
(I
L
= 0 mA to 8 mA)
2
–55°C T
A
+125°C0.007 0.012 0.009 0.015 %/mA
ELECTRICAL SPECIFICATIONS
REF01C
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage V
O
I
L
= 0 mA 9.90 10.00 10.10 V
Output Adjustment Range V
TRIM
R
P
= 10 kΩ±2.7 ±3.3 %
Output Voltage Noise
1
e
n p-p
0.1 Hz to 10 Hz 25 35 µV p-p
Line Regulation
2
V
IN
= 13 V to 33 V 0.009 0.015 %/V
Load Regulation
2
I
L
= 0 mA to 8 mA 0.006 0.015 %/mA
Turn-On Settling Time
3
t
ON
To ±0.1% of Final Value 5 µs
Quiescent Supply Current I
SY
No Load 1.0 1.6 mA
Load Current I
L
821 mA
Sink Current
4
I
S
–0.3 –0.5 mA
Short Circuit Current I
SC
V
O
= 0 30 mA
(@ VIN = 15 V, TA = 25C, unless otherwise noted.)
(@ VIN = 15 V, –55C TA +125C for REF01A/E, and 0C TA 70C for REF01H and
IL = 0 mA, unless otherwise noted.)
(@ VIN = 15 V, TA = 25C, unless otherwise noted.)
REV. C –3–
REF01
V
IN
GND
TRIM
V
O
REF01
15V
2
6
5
4
OUTPUT
10k⍀
Figure 1. Output Adjustment
V
IN
GND
REF01
+18V
–18V
Figure 2. Burn-In Circuit
The REF01 trim terminal can be used to adjust the output
voltage over a 10 V ±300 mV range. This feature allows the
system designer to trim system errors by setting the reference to
a voltage other than 10 V. Of course, the output can also be set
to exactly 10.000 V or to 10.240 V for binary applications.
Adjustment of the output does not significantly affect the tem-
perature performance of the device. The temperature coefficient
change is approximately 0.7 ppm/°C for 100 mV of output
adjustment.
2
45
6
2. INPUT VOLTAGE (VIN)
4. GROUND
5. TRIM
6. OUTPUT VOLTAGE (VOUT)
DIE SIZE 0.074 ⴛ 0.048 INCH, 3552 SQUARE MILS
(1.88 ⴛ 1.22 mm, 2.29 SQUARE mm)
Figure 3. Dice Characteristics (125
ⴗ
C
Tested Dice Available)
(@ VIN = 15 V, 0ⴗC ⱕ TA ⱕ 70ⴗC for REF01CJ, REF01CZ, and
–40ⴗC ⱕ TA ⱕ +85ⴗC for REF01CP and REF01CS, unless otherwise noted.)
ELECTRICAL SPECIFICATIONS
REF01C
Parameter Symbol Conditions Min Typ Max Unit
Output Voltage Change ⌬V
OT
0.14 0.45 %
with Temperature
5, 6
Output Voltage TCV
O
20 65
ppm/°C
Temperature Coefficient
7
Change in V
O
Temperature
Coefficient with Output
Adjustment R
P
= 10 kΩ0.7 ppm/%
Line Regulation
2
V
IN
= 13 V to 30 V 0.011 0.018 %/V
Load Regulation
2
I
L
= 0 to 5 mA 0.008 0.018 %/mA
TCV to C
Vto C
C
and
TCV to C
VtoC
C
O
OT
O
OT
070
070
70
55 125
55 125
180
oo
oo
o
oo
oo
o
+
()
=
+
()
−+
()
=
−+
()
∆
∆
NOTES
1
Sample tested.
2
Line and load regulation specifications include the effect of self-heating.
3
Guaranteed by design.
4
During sink current test the device meets the output voltage specified.
5
⌬V
OT
is defined as the absolute difference between the maximum output voltage and the minimum
output voltage over the specified temperature range expressed as a percentage of 10 V:
∆V
VV
V
OT
MAX MIN
=×
–
10 100
6
⌬V
OT
specification applies trimmed to +10,000 V or untrimmed.
7
TCV
O
is defined as ⌬Var divided by the temperature range, i.e.
Specifications are subject to change without notice.
REV. C
REF01
–4–
WAFER TEST LIMITS
REF01NT REF01N REF01GT REF01G
Parameter Symbol Conditions Limit Limit Limit Limit Unit
Output Voltage V
O
I
L
= 0 10.05 10.03 10.10 10.05 V max
9.95 9.97 9.90 9.95 V min
Output Adjustment
Range V
TRIM
R
P
= 10 kΩ±3.0 ±3.0 % min
Line Regulation V
IN
= 13 V to 33 V 0.015 0.01 0.015 0.01 %/V max
*Electrical tests are performed at wafer probe to the limits shown. Due to variations in assembly methods and normal yield loss, yield after packaging is not guaranteed
for standard product dice. Consult factory to negotiate specifications based on dice lot qualification through sample lot assembly and testing.
(@ VIN = 15 V, TA = 25C for REF01N and REF01G devices, TA = 125C for REF01NT and REF01GT devices,
unless otherwise noted.)*
TYPICAL ELECTRICAL CHARACTERISTICS
REF01NT REF01N REF01GT REF01G
Parameter Symbol Conditions Typical Typical Typical Typical Unit
Load Regulation I
L
= 0 mA to 10 mA
I
L
= 0 mA to 8 mA,
NT, GT @ 125°C0.007 0.005 0.009 0.006 %/mA
Output Voltage
Noise e
n p-p
0.1 Hz to 10 Hz 20 20 20 20 µV p-p
Turn-On Settling To ±0.1% of Final
Time t
ON
Value NT, GT @
125°C7.5 5.0 7.5 5.0 µs
Quiescent Current I
SY
No Load, NT,
GT @ 125°C1.4 1.0 1.4 1.0 mA
Load Current I
L
21 21 21 21 mA
Sink Current I
S
–0.5 –0.5 –0.5 –0.5 mA
Short Circuit
Current I
SC
V
O
= 0 30 3030 30mA
Output Voltage
Temperature
Coefficient TCV
O
10 10 10 10 ppm/°C
*For 25°C specifications of REF01NT and REF01GT, see REF01N and REF01G, respectively.
(@ VIN = 15 V, TA = 25C, unless otherwise noted.)*
REV. C –5–
REF01
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the REF01 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
ABSOLUTE MAXIMUM RATINGS*
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Output Short Circuit Duration
(to Ground or V
IN
) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range
J, RC, and Z Packages . . . . . . . . . . . . . . . –65°C to +150°C
P Package . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +125°C
Operating Temperature Range
REF01A . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
REF01CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
REF01CP, REF01CS, REF01E,
REF01H . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Junction Temperature (T
J
) . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering @ 60 sec) . . . . . . . . . . . . 300°C
*Absolute maximum ratings apply to both DICE and packaged parts, unless other-
wise
noted.
Package Type
JA
*
JC
Unit
TO-99 (J) 170 24 °C/W
8-Pin Hermetic DIP (Z) 162 26 °C/W
8-Pin Plastic DIP (P) 110 50 °C/W
8-Pin SO (S) 160 44 °C/W
*
JA
is specified for worst-case mounting conditions, i.e.,
JA
is
specified for device in socket for TO, CERDIP, and P-DIP pack-
ages;
JA
is specified for device soldered to printed circuit board for
SO package.
ORDERING GUIDE
1
T
A
= 25CPackage Description Operating
V
OS
Max CERDIPS PDIP SOIC Temperature
(mV) TO-99 8-Lead 8-Lead 8-Lead Range
±30 REF01AZ
2
MIL
±30 REF01EJ REF01EZ XIND
±50 REF01HZ REF01HP REF01HS
3
XIND
±100 REF01CJ COM
±100 REF01CP REF01CS
3
XIND
±100 XIND
NOTES
1
Burn-in is available on commercial and industrial temperature range parts in Cerdip, plastic DIP, and TO-can packages.
2
For devices processed in total compliance to MIL-STD-883, add 883 after part number. Consult factory for 883 data sheet.
3
For availability and burn-in information on SO package, contact your local sales office.
REV. C
REF01
–6–
–Typical Performance Characteristics
LINE REGULATION – dB
LINE REGULATION – %/V
VIN = 15V
TA = 25 C
76
66
56
46
36
26
16
0
0.0031
0.0100
0.0310
0.1000
0.3100
1.0000
3.1000
10.000
10 100 1k 10k 100k 1M
FREQUENCY – Hz
TPC 1. Line Regulation vs. Frequency
INPUT VOLTAGE – V
MAXIMUM LOAD CURRENT – mA
SHORT CIRCUIT PROTECTION
500mW MAXIMUM
DISSIPATION
T
A
= 25 C
35
30
25
20
15
10
5
0
3025201510
TPC 4. Maximum Load Current vs.
Input Voltage
TEMPERATURE – C
MAXIMUM LOAD CURRENT – mA
30
15
0
25
20
10
5
–60 –40 –20 140020406080100 120
VIN = 15V
TPC 7. Maximum Load Current vs.
Temperature
FREQUENCY – Hz
OUTPUT NOISE – V p-p
VIN = 15V
TA = 25 C
10,000
1,000
100
10
10 100 1k 10k 100k 1M
TPC 2. Output Wideband Noise vs.
Bandwidth (0.1 Hz to Frequency Indicated)
TEMPERATURE – C
LOAD REG – T/LOAD REG – 25 C
V
IN
= 15V
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
–60 –40 –20 0 20 40 60 80 100 120 140
TPC 5. Normalized Load Regulation
(
I
L
= 10 mA) vs. Temperature
TEMPERATURE – C
QUIESCENT CURRENT – mA
1.3
1.0
0.7
1.2
1.1
0.9
0.8
–60 –40 –20 140020406080100 120
VIN = 15V
TPC 8. Quiescent Current vs.
Temperature
TIME – s
PERCENT CHANGE IN OUTPUT VOLTAGE – %
–10 0 10 20 3040 50 60
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0
V
IN
= 15V
DEVICE IMMERSED
IN 75C OIL BATH
T
A
= 25C, T
A
= 75C
TPC 3. Output Change Due to Thermal
Shock
TEMPERATURE – C
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
–60 –40 –20 0 20 40 60 80 100 120 140
LINE REG – T/LINE REG – 25 C
TPC 6. Normalized Line Regulation
vs. Temperature
REV. C
REF01
–7–
REF01
DAC08
OP02
0.1F
+15V
4
6
5
10k
5.0k
5.0k
5.0k
+15V –15V –15V
+15V
E
O
LSB
MSB
2B1 B2 B3 B4 B5 B6 B7 B8
V+ V– C
C
V
LC
l
O
2
4
l
O
B1 B2 B3 B4 B5 B6 B7 B8 E
POS. FULL SCALE –1LSB 1 1 1 1 1 1 1 1 +4.960
ZERO SCALE 1 0 0 0 0 0 0 0 0.000
NEG. FULL SCALE +1LSB 0 0 0 0 0 0 0 1 –4.960
NEG. FULL SCALE 0 0 0 0 0 0 0 0 –5.000
V
IN
V
O
GND
Figure 4. D/A Converter Reference
VIN
GND
REF01
VO
TRIM
+
–
10.000V
100k
1.1mA
2
6
5
4
9V
9V
0.1F
Figure 5. Precision Calibration Standard
V
IN
GND
TRIM
V
O
REF01
15V
2
6
5
4
R
VOLTAGE COMPLIANCE: –25V TO +3V
I
OUT
I
OUT
= + 1mA
10V
R
Figure 6. Current Source
2
+15V
4DAC08
ANALOG
INPUT
0 TO +10V
lO
lO
+15V
3.9M5.000k
REF01
5k
5k
1k
–15V +15V
–15V
SERIAL
OUTPUT
START
0.1F
0.01F
B1
B2
B3
B4
B5
B6
B7
B8
AM2592
SUCCESSIVE-
APPROXIMATION
REGISTER
5
6
14
15
5678910 1112 1
3
4
5
6
11
12
13
14
CONVERSION
COMPLETE
TTL CLOCK
INPUT 2.25MHz
CONNECT START TO
CONVERSION COMPLETE
FOR CONTINUOUS
CONVERSIONS
1
10
29
7
2
4
3
2
1
4
7
8
16
CC
GND
VIN VO
313
CMP01C
TRIM
Figure 7. A/D Converter Reference
V
IN
GND
REF01
V
O
TRIM
0.1F
5kOP02
10k 0.1%
10k 0.1%
+15V
–15V
+15V
+10V
–10V
4
5
6
2
Figure 8.
±
10 V Reference
V
IN
GND
TRIM
V
O
REF01
I
OUT
2
6
5
4
R
VOLTAGE COMPLIANCE: –3V TO +25V
I
OUT
= + 1mA
10V
R
–15V
Figure 9. Current Sink
REV. C
REF01
–8–
PRECISION CURRENT SOURCE
A current source with 25 V output compliance and excellent
output impedance can be obtained using this circuit. REF01
keeps the line voltage and power dissipation constant in the
device; the only important error consideration at room temperature
is the negative supply rejection of the op amp. The typical 3 µV/
V PSRR of the OP02E will create an 8 ppm change (3 V/V
25 V/10 V) in output current over a 25 V range. For example, a
10 mA current source can be built (R = 1 kΩ) with 300 MΩ
output impedance.
RV
mA
O=××
−
25
810 10
6
VIN
GND
REF01
VO
VIN
GND
REF01
VO
OP02E
R
(TRIM FOR
CALIBRATION)
C
C
R
2
2
2
6
6
7
3
4
6
4
4
+50V
–5V
VO = 0
TO +25V
IO =
+10V
R
RC = 10–5 SEC
Figure 10. Precision Current Source
SUPPLY BYPASSING
For best results, it is recommended that the power supply pin is
bypassed with a 0.1 µF disc ceramic capacitor.
REFERENCE STACK WITH EXCELLENT LINE
REGULATION
Three REF01s can be stacked to yield 10.000 V, 20.000 V, and
30.000 V outputs. An additional advantage is near-perfect line
regulation of the 10.0 V and 20.0 V output. A 32 V to 60 V
input change produces an output change that is less than the
noise voltage of the devices. A load bypass resistor (RB) provides
a path for the supply current (I
SY
) of the 20.000 V regulator.
In general, any number of REF01s can be stacked this way. For
example, 10 devices will yield outputs of 10, 20, 30 . . . 100 V.
The line voltage can change from 105 V to 130 V. However,
care must be taken to ensure that the total load currents do not
exceed the maximum usable current (typically 21 mA).
VIN
GND
REF01
VO
VIN
GND
REF01
VO
VIN
GND
REF01
VO
TRIM
TRIM
10k
10k
RB
6.8k
10k
2
6
5
4
2
6
5
4
2
6
5
4
TRIMMED
OUTPUTS
30.000V
20.000V
10.000V
32V TO 60V
TRIM
Figure 11. Reference Stack
REV. C
REF01
–9–
OUTLINE DIMENSIONS
8-Lead Ceramic Dip-Glass Hermetic Seal [CERDIP]
(Q-8)
Dimensions shown in inches and (millimeters)
14
85
0.310 (7.87)
0.220 (5.59)
PIN 1
0.005 (0.13)
MIN
0.055 (1.40)
MAX
0.100 (2.54) BSC
15
0
0.320 (8.13)
0.290 (7.37)
0.015 (0.38)
0.008 (0.20)
SEATING
PLANE
0.200 (5.08)
MAX
0.405 (10.29) MAX
0.150 (3.81)
MIN
0.200 (5.08)
0.125 (3.18)
0.023 (0.58)
0.014 (0.36) 0.070 (1.78)
0.030 (0.76)
0.060 (1.52)
0.015 (0.38)
CONTROLLING DIMENSIONS ARE IN INCH; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
8-Lead Standard Small Outline Package [SOIC]
Narrow Body
(R-8)
Dimensions shown in millimeters and (inches)
0.25 (0.0098)
0.19 (0.0075)
1.27 (0.0500)
0.41 (0.0160)
0.50 (0.0196)
0.25 (0.0099) 45
8
0
1.75 (0.0688)
1.35 (0.0532)
SEATING
PLANE
0.25 (0.0098)
0.10 (0.0040)
85
41
5.00 (0.1968)
4.80 (0.1890)
4.00 (0.1574)
3.80 (0.1497)
1.27 (0.0500)
BSC
6.20 (0.2440)
5.80 (0.2284)
0.51 (0.0201)
0.33 (0.0130)
COPLANARITY
0.10
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
COMPLIANT TO JEDEC STANDARDS MS-012AA
8-Lead Metal Can [TO-99]
(H-08B)
Dimensions shown in inches and (millimeters)
0.2500 (6.35) MIN
0.5000 (12.70)
MIN
0.1850 (4.70)
0.1650 (4.19)
REFERENCE PLANE
0.0500 (1.27) MAX
0.0190 (0.48)
0.0160 (0.41)
0.0210 (0.53)
0.0160 (0.41)
0.0400 (1.02)
0.0100 (0.25)
0.0400 (1.02) MAX
BASE & SEATING PLANE
0.0340 (0.86)
0.0280 (0.71)
0.0450 (1.14)
0.0270 (0.69)
0.1600 (4.06)
0.1400 (3.56)
0.1000 (2.54) BSC
6
28
7
5
4
3
1
0.2000
(5.08)
BSC
0.1000
(2.54)
BSC
45 BSC
0.3700 (9.40)
0.3350 (8.51)
0.3350 (8.51)
0.3050 (7.75)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
COMPLIANT TO JEDEC STANDARDS MO-002AK
8-Lead Plastic Dual-in-Line Package [PDIP]
(N-8)
Dimensions shown in inches and (millimeters)
SEATING
PLANE
0.015
(0.38)
MIN
0.180
(4.57)
MAX
0.150 (3.81)
0.130 (3.30)
0.110 (2.79) 0.060 (1.52)
0.050 (1.27)
0.045 (1.14)
8
14
5
0.295 (7.49)
0.285 (7.24)
0.275 (6.98)
0.100 (2.54)
BSC
0.375 (9.53)
0.365 (9.27)
0.355 (9.02)
0.150 (3.81)
0.135 (3.43)
0.120 (3.05)
0.015 (0.38)
0.010 (0.25)
0.008 (0.20)
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES)
COMPLIANT TO JEDEC STANDARDS MO-095AA
REV. C
REF01
–10–
Revision History
Location Page
10/02—Data Sheet changed from REV. B to REV. C.
Edits to FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Delete RC-SUFFIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Edits to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Edits to ORDERING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Edits to Package Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Delete CP-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Updated OUTLINE DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
–11–
–12–
C00373–0–10/02(C)
PRINTED IN U.S.A.
